Democritus University of Thrace (DUTH)
Επεμβάσεις δομικών στοιχείων και κατασκευών από οπλισμένο σκυρόδεμα με λεπτούς μανδύες
Abstract
dc:descriptionIn the last decades, the attention of researchers and engineers has been drawn to the enhancement and seismic retrofitting of existing reinforced concrete (RC) structures that fall short of prescribed performance requirements. Various challenges, such as inadequate maintenance, increased loads, evolving design codes, and environmental factors, continually pose threats to the durability of RC structures, including buildings, bridges, and engineering constructions. Of particular concern is their susceptibility to shear failure. Shear failure is known for its brittle nature, often causing sudden, partial, or complete collapse with catastrophic consequences. Therefore, it is imperative to promptly address these shortcomings and improve the shear resistance of such structures. Several techniques have been developed and utilized to diminish vulnerabilities associated with shear failure. One of the widespread methods involves using externally bonded carbon fiber-reinforced polymer (EB-CFRP) sheets and laminates because of their simple application and strengthening efficiency provided in cases of closed-form jacketing by wrapping FRPs around structural elements of rectangular cross-section. However, constructional limitations in existing RC buildings, as the existence of the slab, hinder EB-CFRP wrapping of RC beams and lead to the formation of open types of strengthening. This approach causes anchorage problems and often results in brittle failures because of the CFRP debonding. Various anchoring methods have been developed to delay or address the premature debonding issue and improve the overall performance of the EB-CFRP strengthening systems. Among these, spike anchors, typically CFRP ropes, gained traction as a practical solution for anchoring the EB-CFRP sheets to the concrete substrate. However, even today, a universally accepted method for the design of anchorage has not yet been established. The current doctoral thesis includes an analytical and experimental investigation that addresses the above issues. In this context, the response of beams strengthened against shear with externally bonded CFRP sheets in a U-shaped configuration is first studied experimentally. Meanwhile, the potential enhancement of the CFRP sheets' anchorage using bolted steel laminates has also been examined. Additionally, the ability of a non-destructive structural health monitoring (SHM) system to detect possible debonding of externally bonded CFRP sheets has also been investigated. Further, the design provisions of three different Code Standards (Greek Code of Interventions, Eurocode 8, and ACI) concerning the shear capacity of T-shaped RC beams retrofitted with EB-FRP jackets or strips in U-jacketing configuration are investigated. The ability of these Code Standards to predict safe design estimations is checked against test data from the current experimental project and data available in the literature. To address the negative effects of premature debonding of externally bonded CFRP sheets in U-type configurations, two alternative configurations have been proposed. The first method transforms the open-type strengthening into a closed-type by using CFRP ropes that anchor the thin FRP jackets appropriately. The second method involves creating a closed-form strengthening by positioning CFRP ropes in notches as near-surface-mounted reinforcement and wrapping them around the beam’s web. These closed types of strengthening are performed and tested by either embedding the rope through holes in the slab or through the web of the beam. These two different setups imitate both accessible and inaccessible scenarios for the upper side of the slab. The effectiveness of these proposed strengthening configurations is experimentally examined both individually and in comparison, with one another, focusing on beams with shear and torsional deficiencies. Additionally, a step-by-step methodology for applying these methods is developed and presented, aiming to minimize construction defects and provide instructions for the practical application of thin closed-formed jackets, without premature debonding defects, in real RC structures. A new analytical approach is proposed for prediction of the overall torsional behavior of RC T-beams strengthened with thin FRP jackets in the form of externally bonded sheets and ropes formed as a closed-type jacketing. The ability of the regulatory provisions of four codes, which provide guidelines for estimating the torsional strength of RC beams reinforced with externally bonded FRP sheets, to safely predict torsional strength was also tested through comparisons with experimental data from literature. Finally, the extension of using CFRP ropes for the shear strengthening of RC beam-column joints is investigated. A comparative evaluation of the response of external RC beam-column joints strengthened with thin jackets of EB-CFRP sheets and those strengthened with CFRP ropes is carried out. In addition, the new proposed closed type strengthening was applied for the strengthening of the beam area of an RC beam - column joint.
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Zapris, Adamantis
- Ζάπρης, Αδαμάντης
Subjects
dc:subject × 41- Κατασκευές ωπλισμένου σκυροδέματος (ΩΣ)
- Δοκοί
- Πλακοδοκοί διατομής Τ
- Κόμβοι
- Επεμβάσεις
- Ενισχύσεις
- Λεπτοί μανδύες
- Λωρίδες ινωπλισμένων πολυμερών (ΙΝΩΠ)
- Δέσμες ΙΝΩΠ
- Κορδόνι ΙΝΩΠ
- Διάτμηση
- Στρέψη
- Κάμψη
- Αγκύρωση
- Ανοιχτή μορφή ενίσχυσης τύπου U
- Κλειστή μορφή ενίσχυσης
- Αποκόλληση ΙΝΩΠ
- Reinforced concrete (RC) structures
- Beams
- T-beams
- Joints
- Rehabilitation
- Strengthening
- Thin jackets
- Fiber reinforced polymer (FRP) strips
- FRP bundles
- FRP ropes
- Shear
- Torsion
- Flexure
- Anchorage
- Anchors
- U-shaped jacketing
- Closed form strengthening
- FRP debonding
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Δομοστατική
- Civil Engineering
- Engineering and Technology
- Structural Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56528