International Hellenic University
Investigation of various optimization processes for aluminum extrusion production through mechanical assessment procedures
Abstract
dc:descriptionAluminium extrusion is a manufacturing technique used to produce profiles, with the market estimated at USD 96.31 billion in 2025 and projected to reach USD 120.79 billion by 2029. The core process involves pushing a heated billet through a die shaped to the desired profile, enabling efficient production of a wide range of geometries. Over the years, numerous studies have focused on optimizing the aluminum extrusion process in terms of both efficiency and the mechanical behavior of the extrudates. In this context, the present work systematically explores potential methodologies, including the application of Finite Element Analysis (FEA) tools and the use of liquid nitrogen as a die cooling agent. These approaches aim to produce extrudates with superior mechanical properties (particularly tensile strength and creep resistance) while significantly increasing production rates through FEA-assisted die design optimization process. Building on this foundation, the feasibility of employing Additive Manufacturing (AM) technology for the fabrication of aluminum extrusion dies capable of withstanding the extreme conditions of the extrusion process is also examined. AM offers substantial added value to the aluminum extrusion industry by enabling the production of dies with complex geometries that are difficult to achieve through conventional methods. This results in improved thermal management, extended die life, and enhanced process efficiency. Furthermore, AM reduces lead times and facilitates rapid prototyping and customization, promoting innovation and flexibility in die design. This thesis begins by outlining the fundamental principles of aluminum extrusion and the key strategies employed to enhance productivity and mechanical performance. These include die design optimization through FEA, die cooling using liquid nitrogen, and the adoption of Selective Laser Melting (SLM) as the preferred additive manufacturing technique for the manufacturing of additive manufactured aluminum extrusion dies. It proceeds with a comprehensive review of current research on FEA-driven die optimization for 6xxx series aluminum alloys, the application of liquid nitrogen as a cooling medium, and the mechanical behavior of additively manufactured aluminum and H13 hot-work tool steel. Chapter three presents the research methodology, encompassing SLM processing, mechanical characterization via tensile testing and nanoindentation with a focus on creep behavior, microstructural and fracture analysis using Scanning and Transmission Electron Microscopy (SEM and TEM), computational die design using FEA, and statistical evaluation of 6060 aluminum alloy through incremental impact testing and multiple regression analysis. The following chapters present the results of the three different approaches investigated. Chapter four presents the application of FEA using HyperXtrude® software, supported by experimental trials conducted on a 35MN extrusion press. These simulations provided detailed insights into material flow and thermal behavior within the die, aiding in the refinement of process parameters. Concurrently, a liquid nitrogen cooling system was implemented to improve thermal management and enhance die productivity. The integration of advanced simulation tools with innovative cooling techniques demonstrates a practical approach to optimizing aluminum extrusion. This chapter offers valuable guidance for extruders seeking to achieve higher efficiency and consistent production of high-quality extrudates, as thee FEA predictions closely matched production outcomes in extrudate shape, validating the modeling approach. Implementation of the optimized die design and liquid nitrogen cooling led to an 8.76% efficiency increase, with ram speed rising by 14.7% and 21.8% respectively, without significantly affecting ram pressure or extrudate exit temperature. Chapter five presents the mechanical performance of extrudates produced using an optimized aluminum extrusion die, as developed in Chapter four. The key distinction lies in the die complexity, with this chapter focusing on a four-hole die, compared to the two-hole die examined previously. This research aims to provide comprehensive guidance for extruders on optimizing the aluminum extrusion process in terms of productivity, geometry, and mechanical behavior. In addition to tensile tests, incremental impact and multiple regression analyses were conducted to identify and establish correlations between selected parameters (ageing temperature, ageing time, and the use of liquid nitrogen as a cooling agent) and Ultimate Tensile Stress (UTS), Yield Stress, and strain (%) at UTS. The FEA analysis showed strong agreement with production results, particularly in extrudate shape, confirming the validity of the simulation models. The combination of optimized die design and liquid nitrogen cooling improved production efficiency by 15%, increased ram speed by 10%, and maintained stable ram pressure and exit temperature. Mechanical evaluation revealed that aging time showing a stronger correlation to UTS, Yield Stress, and strain at UTS than aging temperature. The use of liquid nitrogen resulted in a 12.08% increase in strain at UTS, rising from 5.96% to 6.68% during the aging cycle of 8 hours at 180 °C. Chapter six investigates the impact of ageing conditions (such as time and temperature) as well as the use of liquid nitrogen as a cooling agent on creep behavior and relevant creep parameters, including the steady-state creep strain rate, using nanoindentation tests. The creep behavior of the selected 6060 aluminum alloy during nanoindentation testing is further analyzed through measurements taken during the holding stage of the experiment. Results indicate that hardness increased significantly with aging time at 160 °C and 180 °C, reaching +73.68% and +32.86% respectively without liquid nitrogen, and +46.12% and +45.21% with it. The creep stress exponent n increased by 58.62% at 160 °C, 26.43% at 180 °C, and 0.85% at 200 °C, without using liquid nitrogen as coolant of the die. With liquid nitrogen use, n increased by 56.21%, 22.59%, and 0.82% respectively. At 220 °C, n rose after 2 hours but then slightly declined due to the formation of larger precipitates that reduced mechanical performance. Although aging has minimal impact on the steady creep strain rate, high-ram-speed extrusions exhibit lower creep strain rates at reduced aging temperatures (160 °C) due to dislocation-strengthening mechanisms, whereas higher aging temperatures promote precipitate blocking and diminish this effect. However, the dislocations generated at higher ram speeds can contribute to increased strain at UTS, as discussed in the previous chapter. In Chapter seven, a methodology for producing parts from H13 hot work tool steel using additive manufacturing technologies is introduced. This study examines the mechanical behavior of high-strength H13 hot work tool steel produced via the SLM, focusing on tensile and nanoindentation tests. Additionally, the research explores the influence of volumetric energy density (VED), a critical parameter in AM, and the effect of post-heat-treatment nitriding on the creep behavior of H13 hot work tool steel. Nanoindentation tests are used to investigate creep response and associated parameters, such as the steady-state creep strain rate. Measurements and observations during the holding phase provide valuable insights into the material’s behavior. The results confirm the feasibility of manufacturing H13 steel parts with high mechanical performance using the SLM AM technique, comparable to those produced by conventional methods. Tensile tests on as-built H13 tool steel showed high performance, with UTS ranging from 1571 ± 41 MPa to 1836 ± 48 MPa and YTS from 1256 ± 26 MPa to 1468 ± 30 MPa. The highest values found at a VED of 150 J/mm³. Nanoindentation revealed the highest hardness (8960 ± 77 MPa) and lowest indentation depth (1.76 ± 0.01 μm) after nitrification at the same VED, along with improved elastic modulus. Creep tests showed that increasing VED from 50 to 150 J/mm³ reduced displacement by 31.32% (non-nitrided) and 33.79% (nitrided), while nitrification consistently enhanced creep resistance and increased the stress exponent n by up to 18.77%. Increasing the VED from 50 to 150 J/mm³ reduces creep strain rates by 19.32% in non-nitrided specimens and by 33.78% in nitrided ones as well. A die part fabricated using SLM was tested in the aluminum extrusion process on an 18MN Extrusion Press, producing extrudates of acceptable quality and validating its functionality and durability under high-pressure and high-temperature conditions. Chapters Eight and Nine present the conclusions and recommendations for future research. By integrating FEA, experimental validation, and advanced cooling techniques (specifically the use of liquid nitrogen as a die coolant) the study demonstrates substantial improvements in both mechanical performance and production efficiency. Among the evaluated parameters, strain (%) at UTS is identified as the most significantly affected by the increased extrusion ram speeds enabled through liquid nitrogen cooling. Furthermore, the feasibility of employing AM, particularly SLM, for the fabrication of extrusion dies capable of withstanding extreme operational conditions is thoroughly examined. These findings contribute to a deeper understanding of process–structure–property relationships in aluminum extrusion, offering practical insights for industrial implementation and future research in high-performance die design and material behavior under elevated thermal and mechanical loads. More precisely, the integration of FEA with liquid nitrogen die cooling has demonstrated substantial advantages in the optimization of aluminum extrusion die design. This combined approach contributes to increased productivity and enhanced mechanical performance, particularly in terms of strain at UTS, for specific alloy compositions. Furthermore, AM proved to be a viable solution for fabricating complex die geometries that are challenging to produce using conventional machining methods, thereby expanding the design possibilities and improving process flexibility. Building on this PhD study’s findings, future research should explore the microstructural and mechanical effects of higher extrusion ram speeds enabled by advanced die cooling. Focus areas include grain evolution, precipitate behavior, and phase distribution under rapid deformation. Further investigation into post-extrusion aging treatments and their impact on strength and creep resistance is also recommended. Optimizing additive manufacturing parameters for die fabrication and integrating Artificial Intelligence (AI) and Machine Learning (ML) into process modeling could significantly enhance real-time control and quality assurance in aluminum extrusion.
Degree
thesis:*- Grantor dc:publisher
- International Hellenic University
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Giarmas, Evangelos
- Γιαρμάς, Ευάγγελος
Subjects
dc:subject × 30- Διέλαση Αλουμινίου
- Πεπερασμένα στοιχεία
- Τρισδιάστατη εκτύπωση (3D printing)
- Μηχανικές δοκιμές
- Ηλεκτρονικό μικροσκόπιο σάρωσης
- Στατιστική ανάλυση
- Νανοδιείσδυση
- Ερπυσμός
- Δοκιμή σε Εφελκυσμό
- Κράματα αλουμινίου
- Χαρακτηρισμός υλικών
- Επιλεκτική Τήξη με Λέιζερ
- Aluminum Extrusion
- Finite element analysis (FEA)
- Additive manufacturing
- Mechanical Testing
- Scanning electron microscope
- Statistic Analysis
- Nanoindentation
- Creep
- Tensile Test
- Aluminum alloy
- Material characterization
- Selective laser melting
- Μηχανική Υλικών
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη υλικών, χαρακτηρισμός και δοκιμές
- Materials Engineering
- Engineering and Technology
- Materials Science, Characterization and testing
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/60462