Back to search

Georgia Southern University

Nondestructive Evaluation of Structural Defects in Concrete Slabs

Abstract

dc:description.abstract

Nondestructive testing (NDT) is a reliable method for determining the structural integrity of new and old construction and understanding the condition of structural defects. It is widely acknowledged that the interpretation of nondestructive evaluation (NDE) has a significant impact on the reliability and consistency of this technology. However, NDT data acquisition remains subjective and heavily dependent on the operator’s knowledge and expertise. As a result, there are still issues to be resolved regarding the imaging and diagnostic procedures for NDT-based concrete inspection. NDT methods such as ground penetrating radar (GPR), and impact-echo (IE), have been extensively used to inspect concrete bridges for damage and deterioration. In this study, concrete slabs were investigated in a laboratory setting with simulated structural defects such as corrosion, delamination, honeycomb, and voids. To validate the accuracy and robustness of the two NDT methods, defects were embedded closely (ranging from 1 to 5 inches) and superimposed in two different layers for the same specimen. GPR B-scan (line scan) radargrams demonstrated hyperbolic shapes for voids and corroded rebars, whereas delamination was identified by a hollow strip pattern. GPR C-scan (area scan) data was used to calculate the size (length, width, and thickness) of delamination simulated by polystyrene sheets. The results showed an accuracy of 80% in predicting the thickness of delamination. GPR, however, did not detect delamination for objects smaller than 8 inches in size due to the dense meshing. The amplitude data from GPR A-scans (amplitude vs depth) were used to calculate the depth of a defect. Statistical measures exhibit a high degree of agreement between the depth measured by GPR and the actual depth of a defect. The IE method uses elastic waves to propagate through concrete for identifying the embedded defects. The interpretation of IE data involved post-processing of reflected signals in the time-domain and frequency-domain modes. The simulated structural defects did not show any discernible trend in time-domain data. However, defects were detected using IE thickness data from the peak frequency spectrum. The frequency-domain IE data was validated by comparing it to GPR data for similar concrete specimens.

Degree

thesis:*
Name thesis:degree_name
Master of Science, Civil Engineering
Level thesis:degree_level
Thesis (open access)
Discipline thesis:degree_discipline
Department of Civil Engineering and Construction

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kabir, Ehsanul
Contributors dc:contributor
  • Hossein Taheri
  • L. Stetson Rowles

Subjects

dc:subject × 10

Rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.georgiasouthern.edu/etd/2545

Chain of custody

source
Harvested from
Georgia Southern University
Base URL
digitalcommons.georgiasouthern.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kabir, Ehsanul. Nondestructive Evaluation of Structural Defects in Concrete Slabs. Thesis (open access) thesis, https://digitalcommons.georgiasouthern.edu/etd/2545