Georgia Southern University
Enhancing The Mechanical Properties Of Sla 3D-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers
Abstract
dc:description.abstractAbstractThis research explores the development of bio resin from linseed oil by the process of epoxidation and acrylation to produce acrylated epoxidized linseed oil (AELO). Lignin and cellulose biopolymers were added as reinforcement at varying weight fractions of 1 wt.%, 2.5 wt.%, and 5 wt.%, and their mechanical performance was compared against pure AELO. The formulations were printed using an Elegoo SLA 3D printer to create standardized test specimens like tensile bars, compression cylinders, and hardness blocks, which were all prepared according to the ASTM testing standard. The results indicate that reinforcement effects depend on both filler type and loading, and the benefits are not uniform across loading modes. Cellulose appears to provide the most consistent improvement in tensile performance. A.C 5 wt.% produced statistically significant increases in Young’s modulus and ultimate tensile strength of 80.75 MPa and 6.962 MPa, respectively. Compression behavior was less favorable. Neat AELO achieved the highest ultimate compressive strength at 44.97 MPa, while the best reinforced specimen is A.C 5 wt.% at 37.82 MPa. This contrast may suggest that the microstructural changes that raise tensile stiffness and strength, such as altered crosslink density, particle agglomeration, or interfacial effects, can also promote earlier compressive failure. For stiffness in compression, higher lignin loading appeared beneficial, with A.L 5 wt.% reaching 79.28 MPa. Surface hardness increased with reinforcement as well, from 43.6 ± 1.7 for AELO to 51 ± 1 for A.L 5 wt.%. This research highlights the potential of AELO-based resins reinforced with cellulose and lignin as viable photopolymers for SLA printing where sustainability is a priority. The data from this research points to some trade off that should be taken note of during material selection for engineering and medical applications. INDEX WORDS: Acrylated Epoxidized Linseed Oil, Bio-based Resin, Photopolymer, Vat photopolymerization, Stereolithography (SLA), Cellulose, Lignin, 3D Printing, Mechanical characterization and Chemical characterization.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Applied Engineering (M.S.A.E.)
- Level thesis:degree_level
- Thesis (open access)
- Discipline thesis:degree_discipline
- Department of Manufacturing Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Ikedionu, Chukwunonso A
- Contributors dc:contributor
-
- Rafael Quirino
- Haijun Gong
Subjects
dc:subject × 23- 3D Printing
- Acrylated Epoxidized Linseed Oil
- Bio-based Resin
- Photopolymer
- Vat photopolymerization
- Stereolithography (SLA)
- Agriculture
- Biochemistry, Biophysics, and Structural Biology
- Biomaterials
- Biomechanical Engineering
- Biomedical Engineering and Bioengineering
- Bioresource and Agricultural Engineering
- Biotechnology
- Chemical Engineering
- Laboratory and Basic Science Research
- Manufacturing
- Materials Science and Engineering
- Mechanical Engineering
- Operations Research, Systems Engineering and Industrial Engineering
- Other Biomedical Engineering and Bioengineering
- Other Engineering
- Other Materials Science and Engineering
- Polymer and Organic Materials
Rights
- Licence dc:rights.license
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.georgiasouthern.edu/etd/3065