McMaster University
A General Approach to Common-Mode Signal Rejection with Application to Myo-electric Signal Measurements
Abstract
dc:description.abstract<p>A typical instrumentation problem is the detection of a differential signal in the presence of a common-mode signal. In the case of measuring myo-electric signals, the common-mode signals present can be 10²-10⁴ larger than the differential signal. In such instances, the attenuation of these unwanted common-mode signals require complex circuit designs.</p> <p>In this work an investigation of the common-mode signal path led to the development of a general approach to the problem of unwanted signals arising from common-mode signal sources. It was found possible to write the overall common-mode gain as a product of the differential amplifier common-mode response and the isolation gain. The isolation gain depends on the ratio of the impedance of the common-mode signal path to the differential amplifier input impedance. The impedance of the common-mode signal path may be increased by employing in the amplifier system a self-contained power supply and an output coupler device such as a transformer.</p> <p>The general approach was used to design an amplifier system to measure myo-electric signals. This amplifier system gave a much improved common-mode signal rejection over currently used systems which typically have 40 db of differential gain but only -30 db of common-mode gain at 60 Hz. The improvement in common-mode signal rejection was 25 db.</p>
Degree
thesis:*- Department dc:contributor.department
- Electrical Engineering
- Year dc:date.issued
- 1979
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Hayes, Rudy Hasler
- Advisors dc:contributor.advisor
-
- Barber, H.D.
- Chisholm, S.H.
Subjects
dc:subject × 1Identifiers
dc:identifier.*- Identifier URI
- https://doi.org/10.71548/11065
- Dc Identifier Other
-
opendissertations/285
1329
895429