Michigan Technological University
MECHANICAL TESTING OF FUSED FILAMENT 3-D PRINTED COMPONENTS FOR DISTRIBUTED MANUFACTURING
Abstract
dc:description.abstractFused filament fabrication (FFF)-based open-source 3-D printers offer the potential of decentralized manufacturing both in developing and developed countries. Unfortunately, a severe lack of data and standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile strength of a 3-D printed specimen depends largely on the mass of the specimen, which provides a means to estimate the strength of 3-D printed components. Then this information is used to evaluate a bicycled pedal, which was 3-D printed and tested following the CEN (European Committee for Standardization) standards for racing bicycles. The results show the pedals meet the CEN standards and can be used on bicycles at lower costs than standard pedals. This investigation indicates the viability of distributed manufacturing.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Mechanical Engineering (MS)
- Level thesis:degree_level
- Open Access Master's Thesis
- Discipline thesis:degree_discipline
- Department of Mechanical Engineering-Engineering Mechanics
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Tanikella, Nagendra Gautam
- Committee member dc:contributor.committeemember
-
- John Irwin
- Contributors dc:contributor
-
- Joshua Pearce
- John Gershenson
Subjects
dc:subject × 9Identifiers
dc:identifier.*- Identifier
- https://digitalcommons.mtu.edu/etdr/212