Back to search

Michigan Technological University

DESIGN OF A SHAPE-MEMORY-ALLOY BASED TAB ROTATION ACTUATOR

Abstract

dc:description.abstract

A shape memory alloy actuated wire actuated mechanism for tab rotation was designed, manufactured and tested. Antagonistic SMA wires are applied for activating the actuation to enable the tab rotate in both directions. Locking system and rotation sensor are comprised in this design. The system is supervised by a feedback rotation controller. Devices were fabricated with the shape memory alloy wire clamping mechanism and actuation with locking functions. The temperature-voltage relations of clamped SMA wires were predicted with an analytical model based on the thermomechanical study of NiTi done by Epps et al.[1] and Singh et al.[2]. The PID feedback controller was designed with optimized parameters to locate controlled voltage for precise tab angle actuation. The controller operation was tested with LabVIEW® System Design Software. With the feedback control, the relative differences between actuation angle and target angle were analyzed. Further investigation on this SMA –based tab rotation actuation were discussed including operation speed and accuracy.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Civil Engineering (MS)
Level thesis:degree_level
Campus Access Master's Thesis
Discipline thesis:degree_discipline
Department of Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lu, Chao
Committee members dc:contributor.committeemember
  • Hyungchul Yoon
  • Bo Chen
Contributors dc:contributor
  • Qingli Dai

Subjects

dc:subject × 7

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Lu, Chao. DESIGN OF A SHAPE-MEMORY-ALLOY BASED TAB ROTATION ACTUATOR. Campus Access Master's Thesis thesis, https://doi.org/10.37099/mtu.dc.etdr/353