Back to search

Michigan Technological University

IMPROVED DUCTILITY IN AN ARTIFICIALLY AGED AL-ZN-MG ALLOY WITH MN ADDITIONS

Abstract

dc:description.abstract

Further lightweighting of aluminum-intensive vehicle (AIV) body structures is of high priority to increase vehicle range. 7000-series alloys can offer in-service strength levels of 500 MPa which could provide a 30% weight reduction over existing 6000 series structural parts. However, these alloys do not have a stable T4 temper and are not able to be conventionally stamped due to low formability. Hot stamping has been demonstrated as a viable method to forming 7000-series part where a blank is solution heat treated, formed and simultaneously quenched, followed by a two-step artificial age treatment raising the part to its in-service strength. A key challenge to implementing a hot stamped and two-step aged 7000-series part is that they are not readily joinable via self-pierce riveting (SPR), because they lack room-temperature ductility. Precipitation-hardened alloys like 7000-series alloys are susceptible to localized planar slip, which degrades the local ductility needed to form a successful SPR joint. In this work a strategy to reduce planar slip was proposed, in which a dispersion of sub-micron sized, non-shearable, Mn-based dispersoids was added to a dense distribution of nano-sized strengthening precipitates. Model Al-Zn-Mg alloys with various additions of Mn were cast, homogenized, and fabricated into wrought sheet material that was solution heat treated and two-step artificially aged. In the two-step aged condition, the addition of Mn increased ultimate tensile strength, but did not affect tensile yield strength. Mn additions improved ductility due to the formation of Mn-dispersoids that facilitated dislocation cross-slip onto adjacent slip planes, resulting in a more finely-spaced arrangement of slip bands that reduced grain boundary stress localization. A more homogenous slip distribution was observed in TEM and slip-line spacing was quantified using EBSD data collected from strained specimens that were thermo-mechanically processed to have similar grain sizes.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Materials Science and Engineering (PhD)
Level thesis:degree_level
Campus Access Dissertation
Discipline thesis:degree_discipline
Department of Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Freiberg, Daniel S.
Committee members dc:contributor.committeemember
  • Douglas J. Swenson
  • Stephen A. Hackney
  • Walter W. Milligan
  • Mei Li
Contributors dc:contributor
  • Paul G. Sanders

Subjects

dc:subject × 9

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Freiberg, Daniel S.. IMPROVED DUCTILITY IN AN ARTIFICIALLY AGED AL-ZN-MG ALLOY WITH MN ADDITIONS. Campus Access Dissertation thesis, https://doi.org/10.37099/mtu.dc.etdr/1698