Back to search

NJIT

Residual stress analysis of sputtered Tantalum Silicide thin film

Abstract

dc:description.abstract

The influence of different argon pressures on the residual stress, microstructure, and resisitivity of sputtered tantalum silicide thin films has been investigated. TaSi_2 films were deposited onto Si wafers by dc magnetron sputtering. The deposition temperature was assumed to be 300 C. The thickness was about 0.5 um. The residual stresses in the films deposited at different argon pressures were determined by curvature measurement method. The compressive intrinsic stress of 1033.4MPa was measured at P_{Ar} = 0.5 mTorr. The intrinsic stress in the films seemed to change from compression to tension as P_{Ar} increased above 8mTorr. A maximum tensile intrinsic stress of 221MPa was obtained at 10 mTon and the tensile intrinsic stress decreased at the higher argon pressure. SEM showed an accompanying microstructural change from a dense structure at the low pressures to an open growth structure with some gaps between grains at the highest pressure. The electrical resistivity exhibited a sputtering-pressure dependence and seemed to be closely related to the microstructure of films.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Song, Young Joo
Contributors dc:contributor
  • Kenneth Sohn
  • Roy H. Cornely
  • Robert Boris Marcus

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1124

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Song, Young Joo. Residual stress analysis of sputtered Tantalum Silicide thin film. https://digitalcommons.njit.edu/theses/1124