Back to search

NJIT

Development of an apparatus to obtain temperature profiles of molten flowing polymers

Abstract

dc:description.abstract

<p>The object of this investigation is to develop and test an apparatus to predict temperature profiles of polymer melts in laminar flow in a heat exchanger, with non-isothermal wall conditions.</p><p>A commercial polyethylene melt is pumped at various flow rates through a smooth 0.957 in. I.D. pipe. The entrance temperature of polymer is maintained uniform.</p><p>Radially distributed six thermocouples (0.062 in. 0.D.) are placed at 2.5 ft. intervals from the entrance of heat exchanger. Immersion of these probes parallel to the flow direction, reduced the errors due to the conduction of heat from the tube wall to the thermocouple stems.</p><p>The experimental data, calculated viscous heating factors and obtained Nusselt-Graetz data are compared with previous works.</p><p>The results agreed with those theoretical studies which consider the viscous heating of polymer melts as a significant flow character. This study revealed that the viscous heating effects are too important to neglect and that the heat transfer phenomena is strongly dependent on viscous heating and the expansion-cooling of the polymer melt. The viscoelastic behavior, that is attributed to polymer melts, is the major cause of viscous heating.</p><p>The literature review has shown that there is no experimental work accomplished to investigate the temperature profile development of polymer melts.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering and Chemistry

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Saltuk, Ismail Kemal
Contributors dc:contributor
  • Richard G. Griskey
  • Hung T. Chen
  • Deran Hanesian

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/2438

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Saltuk, Ismail Kemal. Development of an apparatus to obtain temperature profiles of molten flowing polymers. https://digitalcommons.njit.edu/theses/2438