Back to search

Rowan University

IDENTIFYING FAILURE BEHAVIORS IN STEREOLITHOGRAPHY FROM VARIED PRINT ORIENTATIONS

Abstract

dc:description.abstract

Stereolithography (SLA) is an additive manufacturing (AM) technique that utilizes photopolymerization to create three-dimensional shapes by strategically printing layers of material. Printing parameters such as layer orientation, print resolution and post cure can affect a specimen’s homogeneity, longevity and mechanical characteristics. Because of this variability, print parameters must be carefully considered when designing products and print processes for desired components, as manufacturers often fail to include all relevant print settings when advertising mechanical properties. For this study, 130 SLA-printed specimens were created with 100-micron print layer thickness and print orientations varying between 0 and 90, including intermediate orientations, to observe failure behavior and potential trends in ultimate tensile stress and ductility (as defined by deformation beyond ultimate stress). Specimens were designed and tested according to ASTM D638-14 standards, and printed using FormlabsTM Grey V4, White V4 and Tough resins. Specimens printed with print layers parallel to the applied tensile load were found to be 6.53 MPa (13.8%) stronger on average than those printed with print layers perpendicular to the applied tensile load. Most test specimens with print orientation parallel to the tensile stress exhibited ductile failures. However, as the orientation tends toward print layers that are perpendicular to the tensile loads, the specimens become more likely to exhibit brittle behavior at failure.

Degree

thesis:*
Name thesis:degree_name
M.S. Civil Engineering
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Veltre, Kevin
Contributors dc:contributor
  • William T. Riddell, Ph.D.
  • Joseph F. Stanzione, III, Ph.D.
  • Francis M. Haas, Ph.D.

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://rdw.rowan.edu/etd/3566

Chain of custody

source
Harvested from
Rowan University
Base URL
rdw.rowan.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Veltre, Kevin. IDENTIFYING FAILURE BEHAVIORS IN STEREOLITHOGRAPHY FROM VARIED PRINT ORIENTATIONS. Thesis thesis, https://rdw.rowan.edu/etd/3566