Back to search

South Dakota State University

Modeling of Dye Sensitized Solar Cells Based on Trap-assisted Interfacial Charge Transfer

Abstract

dc:description.abstract

Dye Sensitized Solar Cells (DSSCs) have attracted much attention as a potential alternative to conventional solar cells due to its simple fabrication methods, low material cost, high absorption coefficient, flexibility, light weight etc. However, the low conversion efficiency of DSSC is hindering its commercialization. The loss mechanisms associated with the performance of the cells, which lead to low power conversion efficiency are not clearly understood and quantified in dye sensitized solar cells. Thus, there is a need for a charge transport model that relates the performance characteristics of DSSC to the material and device parameters and provides guidance to experimentalists regarding the performance limiting factors in a real device. The objective of this research was to develop a robust charge transport model for DSSC that incorporates the internal physical processes in charge transport and lead to a quantifiable understanding of loss mechanisms. A charge transfer model was developed that incorporated electron capture/emission and oxidation/reduction processes mediated by the deep level interfacial trap states. The charge transport was modeled through the formulation of electron conservation law in the nanoporous TiO2 network for both steady state and time dependent conditions. Newton Raphson method was used to solve the charge transport model which was a 1D nonlinear second order differential equation. The photovoltaic characteristics of the DSSCs such as external quantum efficiency (EQE) and dark and illuminated IV, were simulated and the performance characteristics such as open circuit voltage, short circuit current and activation energy were obtained for the devices. The model was validated through a series of measurements on fabricated DSSCs. The activation energy of charge transport derived from temperature dependent dark IV characteristics for simulated and experimental DSSCs were 0.93 eV and 0.9 eV respectively. The Simulation concluded that in cells with low interface quality, interface treatment leads to enhance Jsc and Voc, while in high quality DSSCs, interface treatments lead to enhanced Voc and device efficiency. Good agreement between the measurement and simulation results confirms that the dominating charge transport pathway in DSSCs is the trap-assisted interfacial charge transfer at TiO2/dye/electrolyte interface.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - University Access Only
Discipline thesis:degree_discipline
Electrical Engineering and Computer Science

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Nepal, Jeevan
Contributors dc:contributor
  • Mahdi Farrokh Baroughi
  • David Galipeau

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • <p>In Copyright - Educational Use Permitted<br /><a href="http://rightsstatements.org/vocab/InC-EDU/1.0/">http://rightsstatements.org/vocab/InC-EDU/1.0/</a></p>
Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/1620

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Nepal, Jeevan. Modeling of Dye Sensitized Solar Cells Based on Trap-assisted Interfacial Charge Transfer. Thesis - University Access Only thesis, https://openprairie.sdstate.edu/etd/1620