Back to search

University of Southampton

Model investigation into the hydraulic performance of mattress protected slopes of low head hydraulic structures

Abstract

dc:description.abstract

The aim of this study was to provide some information about the<br/>hydraulic performance of mattresses protecting slopes of low head<br/>hydraulic structures. The flow resistance as well as stability of<br/>slope were investigated.<br/><br/>The experimental programme was conducted in the Chilworth<br/>Hydraulics Laboratory, Department of Civil Engineering. Two<br/>models were constructed and tested. The inpermeable model (first)<br/>had a slope of 1:7 (V;H) with mattress dimensions of 320x350mm<br/>and a height of 40mm. The permeable model (second) was built with<br/>the same slope except that the mattresses were protecting a sand<br/>core.<br/><br/>The flow resistance of the mattresses was studied which included<br/>Manning's roughness coefficient, Chezy's resistance factor and<br/>Darcy-Weisbach friction factor. Velocity distribution above the<br/>mattresses was evaluated and found well describing the flow.<br/>The stability of the mattresses and their ability to resist<br/>failure when exposed to higher discharges were also examined and<br/>found stable under the discharges tried.<br/><br/>Detailed measurement of pressures were conducted in the permeable<br/>model in order to study their effects on the stability of the<br/>mattresses; such as; pressure distribution above the mattresses,<br/>uplift pressures and seepage forces. Shear stresses due to<br/>seepage forces were found very small and could be neglected.<br/>Comparison with the results of smooth board simulating a<br/>reinforced concrete structure, favours the mattresses as a means<br/>to control erosion and dissipate energy efficiently.<br/><br/>Measures were suggested in terms of installation to reduce the<br/>drag and uplift forces. A design procedure for a slope protected<br/>by mattresses was set up and followed by a numerical example<br/>implementing the results obtained in this study.<br/>—<br/>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
1993

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tahir, Taha
Advisor dc:contributor.advisor
  • Tosswell, Paul

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Tahir, Taha. Model investigation into the hydraulic performance of mattress protected slopes of low head hydraulic structures. doctoral thesis, University of Southampton, 1993.