Abstract
dc:description.abstractMultiphase flow problems are omnipresent in numerous industrial processes and natural environments; in this realm, modulating the location and shape of evaporating sessile droplets on solid substrates is crucial in a range of applications where droplet dynamics matters, such as spray cooling processes, DNA analysis, display fabrication technologies, novel methods in water collection, cosmetics industry, fuel applications, and microfluidic systems. The motion of an evaporative liquid droplet on a substrate is relatively straightforward to conceptualise, but behind the scenes, the governing intrinsically complex physics is driven by macroscale microscale interplays. Among the analytical, experimental and numerical techniques, regardless of the intrinsic merits of the first two approaches, they can be oversimplified, limited and expensive in dealing with empirical limitations and errors, respectively. Numerical methods are relatively straightforward to generalise and account for a broad range of complicated and hard-to-provide circumstances. Nevertheless, there are challenges in simulating precise fluid systems using computational fluid dynamics (CFD). Various interface tracking approaches have been introduced and developed to address the increasing complexity of multiphase flows in response to the growing demands of recent decades. The volume-of-fluid (VOF) method is one of the popular methods employed and included in Ansys FLUENT. In this research, in order to numerically study microdroplet evaporation spreading over solid substrates as a liquid-vapour phase-changing system below the capillary length scale, a parametric study was performed to capture the microdroplet dynamics using the Georeconstruction method to accurately capture the droplet interface dynamics in parallel with the evaporation model of Lee on different substrate geometries, evaporation frequencies and wetting patterns. The hydrophobicity level (wetting pattern) and the phase change model parameters influence the evolution of the evaporating microdroplet. Initially, for the Basis Spline (B-spline) hydrodynamically smooth solid surface with constant (ideal) contact angle (CA), as a homogenous substrate, droplet mass evolution, droplet-solid surface wetting area (DSSWA) change, droplet trajectory along with its speed using add-on C coding in FLUENT, and using image processing (IP) in Python, and droplet-solid surface interface perimeter (DSSIP) are investigated; additionally, developing the image processing code, the circularity index (CI) of DSSWA is calculated to monitor the circularity of the wetted area. The proposed CI technique can be used for droplet splitting detection and analysis as a quantitative method. The DSSWA can be used in applications that droplet wetting trace, and interface matters. Furthermore, droplet speed fluctuations are analysed using Fast Fourier Transform (FFT) and signal processing (SP) in MATLAB to investigate possible underlying statistical features. To facilitate the quantitative analysis of droplet rotation, some scripts have been written that calculate and monitor the droplet vorticity and helicity in a few cases. Using further case studies, this approach enables us to investigate the droplet phase dynamics and correlate them with other aforementioned factors. Chapter by chapter, the complexity and realistic degree of the simulations escalates from an ideal wetting condition on a hydrodynamically smooth substrate (pining free substrate) in Chapter 5 followed by Chapter 6 including evaporation on the smooth substrates by two radial (continuous) gradient-based wetting patterns i.e., droplet holding and droplet repelling patterns, which are experimentally achievable using an active method of electric field and an array of electrodes through the concept of electrowetting-on-dielectrics introduction modifying the surface energy rendering CA variation or substrate laser etching as a passive wetting pattern manufacturing. Chapter 6 includes non-ideal heterogeneous substrates, specifically with random patterns, either random wetting patterns with sharp contrast or contact angle hysteresis, or an ideal wetting pattern on rough substrates is considered. The results for the ideal CAs (Chapter 5) show the dependency level of droplet dynamics on the wetting conditions as well as the evaporation frequency acting as a mass change intensity factor. The combined counterbalancing influences of the evaporation frequencies (directly) together with hydrophobicity level (inversely) on the droplet mass change are illustrated using three dimensional plot, which shows the partial outweighing effect of CA and have the potential to provide predicting correlations between droplet mass evolution, droplet evaporation frequency (EvpF) and CA; in other words, the highest EvpF and lowest CA amplifies the evaporation rate. Moreover, the concept of droplet residence time on a solid surface (DSSRT) is studied in all cases, which differs from droplet evaporation time (extinction). The results of the gradient-based wetting (Chapter 6) show a high dependency level of droplet dynamics on the wetting pattern, and secondly, on the evaporation frequency. Additionally, the changes in DSSWA and DSSIP caused by the gradient wetting pattern are studied, which were opposite for the droplet-repelling and droplet-holding patterns. EvpF shows a peak value amplification and time-shifting feature in the CI and DSSWA plots. The droplet holding wetting pattern can significantly improve DSSRT, which is efficient for small substrates. The results of Chapter 7 show that for a random wetting pattern with high CA contrast (60-120°), the DSSRT is higher than its constant CA counterparts, the liquid mass evolution is not linear, and its evaporation rate is higher than all the corresponding EvpF cases, even the hydrophilic case. For a flat substrate with a roughness level comparable to that of its smooth B-Spline counterpart under a fixed neutral wetting condition, the liquid mass evolution slope is higher, and the substrate roughness induces fluctuations. The study of heterogeneous substrates reveals phenomena such as pinning, rapid evaporation induced instabilities, splitting, satellite droplet formation, and more intensive evaporation, leading to more complex dynamics. Finally, some potential future works are enumerated in the last chapter.
Degree
thesis:*- Name dc:type.qualificationname
- phd
- Level dc:type.qualificationlevel
- doctoral
- Grantor dc:publisher.institution
- The Open University
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Amiri Hezaveh, Abolfazl
Rights
- Language dc:language
- en