The Open University
Multiscale Characterisation of Creep Deformation in Copper Chromium-Zirconium Alloy; a Candidate Heat Sink Material in Nuclear Fusion Devices.
Abstract
dc:description.abstractCopper-chromium-zirconium alloys (CuCrZr) are the candidate heat sink materials for fusion devices and have been chosen due to their high thermal conductivity and favourable mechanical properties even fitting in the fusion device operational envelope. The currently available data on the alloy’s deformation characteristics associated with its creep performance and the underlying granular scale deformation mechanisms remains limited. Thus, in order to improve the technological readiness level of the alloy by developing a detailed multiscale deformation data base from the fusion relevant experimental data is of vital importance. In particular, the relationship between the bulk scale creep deformation behaviour, inter and intra granular strain localisation along with stress driven microstructural transformation have not been extensively explored neither qualitatively nor quantitatively. A combination of optical digital image correlation (Optical-DIC), high resolution digital image correlation (HR DIC), electron backscatter diffraction (EBSD) and hardness measurements has been applied for investigating the deformation behaviour of the candidate precipitation hardened copper-chromium-zirconium alloy (CuCrZr). The research includes the establishment of basic material properties like the Young’s modulus, yield and the ultimate tensile strength of the material at 300 °C. To establish the creep rupture life of the alloy at fusion relevant conditions, creep rupture life determination tests at 300 °C at 285 MPa and 260 MPa were conducted and the results have been analysed to determine the controlled interruption points required for the high-resolution digital image correlation tests. The use of an hourglass type specimen geometry enabled the full-field acquisition of bulk-scale strain maps effectively at multiple stress levels in a single specimen using the optical-DIC technique. The HR-DIC measurements along with the EBSD data acquisition, before and after the interrupted creep tests were made possible by the titanium-silver (Ti-Ag) remodelled speckle pattern, which resolved sub-micron scale strain localisation within the three stress levels represented by the three regions of interest (ROIs) for both the interrupted creep tests. The co-registration of the EBSD data with the HR-DIC strain localisation data for these three distinct stress levels in both the tests enabled the characterisation of relationship between, effect of granular interfaces on strain localisation, slip activity, strain distribution and granular transformation. The results reveal a clear thermo-mechanical stress-dependent transition in the dominant deformation mechanisms. High stress conditions exhibited pronounced intragranular strain localisation, grain boundary migration and microstructural signatures associated with partial discontinuous dynamic recrystallisation. The quantitatively explored relationship between bulk creep strain, crystallographic slip and stress driven boundary reconfiguration reveal dominant orientations for damage accumulation and evolution. The intense and fine slip bands ranging through the entire grains in the near yield stress conditions reveal a clear stress dominated transition between plastic strain accumulation and evolution. The slip trace analysis along with the HR-DIC maps for the below yield stress conditions reveal minimal slip activity signalling towards low plastic deformation. Large area EBSD analysis reveals a transitional stress regime at ~ 265 MPa and 300 °C for the alloy, which results in a noticeable grain boundary character transformation. In contrast the sub-yield conditions reveal lower kernel average misorientation values, minimal texture evolution, and homogeneous strain fields. The pre and post-test hardness measurements support the accumulation of plastic deformation in form of dislocation storage and pinning resulting in dynamic precipitation. This phenomenon is well known to hamper the rate of discontinuous dynamic recrystallisation specifically due to precipitate-dislocation interactions at grain interfaces. Overall, the multiscale experimental methodology integrating optical-DIC, HR-DIC, EBSD and hardness measurements has laid a pathway for establishing a relationship between the macroscopic creep response and the heterogeneous micro-scale strain localisation, and its dependence on the orientations for the solution annealed, peak aged CuCrZr alloy. These findings would thus form a foundation for informing the crystal plasticity finite element modelling and digital twin development for the heat sinks to be used in fusion devices.
Degree
thesis:*- Name dc:type.qualificationname
- phd
- Level dc:type.qualificationlevel
- doctoral
- Grantor dc:publisher.institution
- The Open University
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Kulkarni, Parth N.
Rights
- Language dc:language
- en