Abstract
dc:description.abstractThe effectiveness of road surfacings, particularly thin bituminous seals, is paramount for road performance, asset management strategies and reducing the carbon/environmental cost of road surfacing. Various graded-aggregate seals, like Otta Seal, Sand Seal, and Grit Seal, have been utilised to varying degrees around the world. Their design has traditionally relied on empirical methods, leading to inconsistent outcomes. This research aimed at identifying the aggregate and aggregate-bitumen mixture characteristics essential for good-performing graded-aggregate seals and developing a more rational approach to their design.<br></br><br></br> This research assessed the performance of a selection of existing road sections, and retrieved samples of their bituminous seals, which were further tested in the laboratory and their characteristics analysed. Additionally, fresh crushed rock aggregate and natural gravels were mixed with bitumen and moulded in the laboratory, their volumetric characteristics tested and analysed.<br></br><br></br> The results showed that good-performing aggregate seals may be defined by a combination of parameters usually associated with chip seals, and parameters associated with premixed-and-laid graded-aggregate surfacings (asphalt). These characteristics are (i) proportion of particles finer than the 75 µm sieve size, (ii) modified coefficient of uniformity for particle size, (iii) minimum design layer thicknesses, (iv) bitumen absorption by the aggregate, and (v) the quantity of voids in the aggregate matrix.<br></br><br></br> Significantly, this research showed that the Marshall mix design approach was a good predictor of expected in-service characteristics of asphalt. The research calibrated equations used for chip seal design to enable their use in designing graded-aggregate seals. Furthermore, the research highlighted that the seal thickness-to-maximum aggregate size ratio significantly influenced seal performance and is therefore a critical design input.<br></br><br></br> These findings enabled the establishment of precise specifications, and a more rational design approach, ensuring enhanced predictability and performance (longevity) of graded-aggregate seals.<br></br>
Degree
thesis:*- Name dc:type.qualificationname
- phd
- Level dc:type.qualificationlevel
- doctoral
- Grantor dc:publisher.institution
- The Open University
- Year dc:date.issued
- 2024
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Otto, Andrew
Rights
- Language dc:language
- en