Back to search

University of Alabama Birmingham

Fiber Metal Laminate with Thickness Reinforcement

Abstract

dc:description.abstract

In this study, a new hybrid fiber metal laminate (FML) material is developed in which fiber composites (both thermoset and thermoplastic matrix composites) and metal are bonded together mechanically using the hooks integrated on the metal. The hooks function as through thickness reinforcement and are used to enhance the bonding strength between the fiber composites and the metal. Process optimization is performed for the VARTM process used in manufacturing the thermoset composite FML in order to gain full benefit of the through thickness reinforcement. Extra pressure in addition to the vacuum is applied to push fiber tows inside the hooks and eliminate the porosities and resin rich areas around the hooks. Microstructural analysis is used to study the effect of the processing conditions on the quality of the FML samples. Different tests are also conducted to study the effect of the processing conditions on the mechanical properties, including the tensile properties, flexural properties and bonding strength of the thermoset FML. The testing results have shown improvement in tensile and flexure strength of the FML after process optimization compared to Baseline FML. Thermoplastic FML shows increased tensile and flexural properties as well. The mode I interlaminar fracture toughness in the thermoset composite FML is modeled using a bilinear model with the modeling input obtained from hook pullout testing. The modeling result has a relatively good agreement with the experiment result. In the fracture toughness testing, delamination occurred to both sides of the aluminum sheet, while the single hook pull-out testing showed that delamination occurred to only one side. The additional delamination has probably contributed to the increase of the fracture toughness value obtained from the fracture toughness testing compared to the modeling result.

Degree

thesis:*
Level thesis:degree_level
Thesis

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yeole, Pritesh S
Contributors dc:contributor
  • Haibin Ning
  • Uday Vaidy
  • Selvum Pillay

Subjects

dc:subject × 4

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
University of Alabama Birmingham
Base URL
digitalcommons.library.uab.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Yeole, Pritesh S. Fiber Metal Laminate with Thickness Reinforcement. Thesis thesis, https://digitalcommons.library.uab.edu/etd-collection/3416