Back to search

University of British Columbia

A square-wave-driven radiofrequency quadrupole cooler and buncher for TITAN

Abstract

dc:description

The TITAN (TRIUMF'S Ion Trap for Atomic and Nuclear science) project at TRIUMF will use the unique combination of an Electron Beam Ion Trap (EBIT) charge state breeder and a precision Penning trap to carry out high accuracy mass measurements (δm/m ≈ 1 x 10⁻⁸) on short-lived (t₁/₂≈ 50 ms) isotopes. In order to obtain fast and efficient charge state breeding it is necessary to inject a cooled and bunched beam into the EBIT. For radioactive isotopes this can be achieved by employing a segmented, gas-filled, RadioFrequency Quadrupole (RFQ). Such a device has been developed for use in the TITAN experiment. Previous RFQ coolers have been driven sinusoidally, however this device will be driven with a large amplitude (V[sub pp] = 400 V) high frequency (f = 1 MHz) square-wave. This makes a broadband, linear, cooling trap possible for the first time. Using matrix methods the motion of ions in a square-wave-driven trap were studied and the acceptance and the space charge limit of the trap calculated as a function of the operating parameter, q. A simple viscous drag model for the cooling process was then used to prove the cooling concept. A Monte Carlo routine was developed and used to simulate the cooling of cesium ions in a helium buffer gas. At an operating parameter of q = 0.4 a cooling time of 600/μs was found at a gas pressure of 2.5 x 10⁻² mbar. The final temperature, T[sub f], of the ion cloud was found as a function of q (for q < 0.4, T[sub f] < 400 K)- Ion optics for the injection and the extraction of ions from the trap were designed and simulated. Transverse rms emittances on the order of 3 π mm mrad and longitudinal rms emittances on the order of 2 eV μs for the extracted beam were demonstrated at an extraction energy of 2.5 keV. Simulations of a previously designed and manufactured stable ion source system were carried out to try and match the emittance of the beam to the acceptance of the RFQ. Through a combination of simulation and experimental results it was shown that with minor modification the system would give a relatively good approximation to the actual radioactive ion beam produced at TRIUMF. Further simulations showed that an acceptance of 99.8% of the modified beam by the RFQ will be possible.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Physics
Grantor dc:publisher
University of British Columbia
Year dc:date
2005

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Smith, Mathew

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/16468

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Smith, Mathew. A square-wave-driven radiofrequency quadrupole cooler and buncher for TITAN. master's thesis, University of British Columbia, 2005. http://hdl.handle.net/2429/16468