Back to search

University of British Columbia

Design, construction, and operation of a piston type sampler for a liquid-liquid extraction spray column

Abstract

dc:description

A piston type of sampler was designed and constructed to sample the dispersed phase of a spray liquid-liquid extraction tower. The aim was to check a previous method of sampling the dispersed phase. This method depended on the use of a long probe which descended into the column from above and through which samples were removed by suction. Calculated values of the dispersed phase concentration using the piston type sampler were found to be generally lower than the corresponding concentrations using the dispersed phase probe. The system studied was methyl isobutyl ketone (the dispersed phase)-acetic acid (the solute) - water (the continuous phase). The solute was transfered from the aqueous phase, which was saturated with methyl isobutyl ketone, to the organic phase, which was saturated with water. Mass transfer data were gathered for this system in a 1.5-in. I.D. column which was approximately 7.3-ft. in height.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1960

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hawrelak, Richard Alan

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/39561

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Hawrelak, Richard Alan. Design, construction, and operation of a piston type sampler for a liquid-liquid extraction spray column. master's thesis, University of British Columbia, 1960. http://hdl.handle.net/2429/39561