Back to search

University of British Columbia

Growth and structure of yttrium sesquioxide epitaxial films

Abstract

dc:description

The use of molecular beam epitaxy as a method for producing solid state host crystals for planar waveguide lasers has been investigated. Single crystal yttrium sesquioxide with a very high degree of structural order has been grown on R-plane sapphire substrates. The (01Ῑ2) Al₂O₃ substrates were annealed in air at 1150°C to generate atomically smooth surfaces with parallel atomic steps. This process was important for maximizing structural quality and minimizing surface roughness of the grown Y₂O₃ film. A critical-thickness-like phenomenon was discovered, where the Y₂O₃ would grow in regions with near structural perfection at the beginning of growth. In thicker films, the x-ray diffraction peaks became wider, indicating less crystalline uniformity. The maximum equivalent “critical thickness” achieved was 7 nm for a film grown at 800°C with a growth rate of 20 nm/hr. The highly ordered material may be present in one uniform layer or distributed in smaller regions throughout the thin film. Y₂O₃ films on Al₂O₃ were annealed in air at temperatures up to 1400°C to study interdiffusion. By analyzing x-ray diffraction measurements, we found that Al migrated from the substrate into the Y₂O₃ film with an approximate activation energy for bulk diffusion of 3.0 eV. Diffusion on the Y₂O₃ surface was estimated to have an activation energy of (0.5 ± 0.3) eV from atomic force microscopy images. After annealing, the presence of Y₄Al₂O₉, YAlO₃, and Y₃Al₅O₁₂ phases was confirmed using x-ray diffraction and photoluminescence measurements. Attempts were made to use molecular hydrogen gas and gallium as surfactants during growth to improve film properties. No conclusive benefit was observed. Y₂O₃ film surface roughness was observed to increase roughly proportionally to the square root of film thickness. A 600 nm thick waveguide layer grown under optimal conditions had a root-mean-square roughness of 5.8 nm. This level of roughness could cause scattering loss at the waveguide core-cladding interface that is problematic for practical applications.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Physics
Grantor dc:publisher
University of British Columbia
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Webster, Scott Elliott

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/41417

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Webster, Scott Elliott. Growth and structure of yttrium sesquioxide epitaxial films. doctoral thesis, University of British Columbia, 2012. http://hdl.handle.net/2429/41417