Back to search

University of British Columbia

A comparison of the mechanical properties of pigmented silicone elastomers used in maxillofacial prostheses

Abstract

dc:description

Purpose: To evaluate and compare the mechanical properties of various commercially available pigmented polydimethylsiloxane elastomers (silicone elastomers) utilized in the fabrication of maxillofacial prostheses. Materials & Methods: Three commonly used silicone elastomers were evaluated: A-2000 (Factor II), A-2186 (Factor II), A-103 (Factor II). The silicones was combined with opacifier: Titanium White (Factor II), and pigment: Intrinsic Pigment in Naturelle (Factor II). Specimens were fabricated through the use of aluminum and stone moulds to form trouser- and dumbbell- shaped specimens. From each material 20 specimens were prepared, 10 dumbbell-shaped and 10 trouser-shaped (n=10) for a total of 60 specimens. Mechanical properties evaluated included: Shore-A hardness, tear strength, tensile strength, and percent elongation. These properties were tested according to ASTM protocols. Data was statistically-analyzed with one-way ANOVA of each property at the 95% level of confidence as well as Tukey’s post-hoc tests for specific identification of significant differences between materials. Results: ANOVA indicated statistically-significant differences among the three materials for each of the four outcomes tested. Further statistical analysis with Tukey’s post-hoc tests showed significantly lower tensile strength and tear strength and higher % elongation for A-103 when compared to both A-2000 and A-2186. No statistically significant differences were found between A-2000 and A-2186 with respect to tensile strength, percent elongation or tear strength. All three groups were found to be significantly different from each other in terms of Shore-A hardness. A-103 exhibited the lowest hardness values, whereas A-2186 was found to have the highest hardness. iii Conclusions: Material A-103 exhibited the lowest tensile and tear strengths as well as hardness, however, it displayed the greatest percent elongation. Material A-2000 and A-2186 displayed similar characteristics with regard to tensile and tear strengths, but differed in terms of Shore-A hardness with A-2186 exhibiting the greatest hardness.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Craniofacial Science
Grantor dc:publisher
University of British Columbia
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • El-Mowafy, Nora

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/66857

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

El-Mowafy, Nora. A comparison of the mechanical properties of pigmented silicone elastomers used in maxillofacial prostheses. master's thesis, University of British Columbia, 2018. http://hdl.handle.net/2429/66857