Back to search

University of British Columbia

A study of selenate removal from water by adsorption on an aged, carbonated Friedel’s salt material with mass loss considerations

Abstract

dc:description

In this work, selenate removal from water was studied using a material from the layered double hydroxide family. This material is a mixture of two hydrocalumite phases, chloro-hydrocalumite [Ca₄Al₂(OH)₁₂]·[Cl₂·4H₂O] and chloro-carboaluminate hydrocalumite [Ca₄Al₂(OH)₁₂]·[Cl(CO₃)₀.₅·10.8H₂O]. This material is called aged-FS in this thesis. Aged-FS was obtained by the co-precipitation method followed by an aging process. The aging condition was initial pH 12.0, liquid/solid ratio 20, 65 °C, for 7 days. During aging, a phase transformation from chloro-hydrocalumite in the hexagonal crystal system to chloro-carboaluminate hydrocalumite in the monoclinic crystal system was observed. The aluminum hydroxide impurity was removed and katoite (Ca3Al2(OH)12) was formed. The formation of well-shaped hexagon crystallites and agglomeration of particles were observed by morphology and particle size studies, respectively. The carbonate content increased during aging from 1.15 to 3.00 wt.%. By aging, ~50% reduction in FS dissolution was recorded. By some modifications in nitrogen purging of the synthesis process, the carbonate content was reduced from 1.15 to 1.01 wt.%. For selenate removal studies, the effect of initial pH, liquid/solid ratio, time, temperature, agitation, selenate concentration, sulfate and carbonate interference, and container type were studied. The highest loading percentage of selenate and the lowest dissolution of aged-FS was achieved at initial pH 12.0, liquid/solid ratio 200, 30 °C, 24 h, and 150 RPM. A selenate loading isotherm was fitted to the Langmuir model with maximum loading of 71.1 mg Se/g. The intercalated carbonate in aged-FS did not interfere with selenate removal while significant interference was observed from carbonate in solution. The sulfate anion did not interfere with selenate adsorption. The Al dissolution from aged-FS in an adsorption test was suppressed using calcium hydroxide solution. The Al concentration reached to 0.07 ppm; a value lower than the maximum instantaneous value set by a BC guideline. Calcination of aged-FS improved the selenate loading. The lowest level of selenium in solution achieved using the calcined aged-FS (1.84 ppb) met the 2016 US EPA maximum discharge limit of lotic water for Se (<3.1 ppb). Overall, calcined aged-FS is a promising exchanger for selenate removal from calcium sulfate- saturated industrial effluents.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rasouli, Maryam

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/72208

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Rasouli, Maryam. A study of selenate removal from water by adsorption on an aged, carbonated Friedel’s salt material with mass loss considerations. doctoral thesis, University of British Columbia, 2019. http://hdl.handle.net/2429/72208