Back to search

University of British Columbia

Redundancy-aware hybrid FE–analytical compliance modeling and experimental assessment of a 3-(P-P)PPSR hybrid parallel robot

Abstract

dc:description

Kinematic isotropy alone is insufficient to characterise the load-induced motion of a redundantly actuated parallel robot. This thesis develops a hybrid FE–analytical compliance model for the 3-(P-P)PPSR hybrid parallel robot. A redundancy-dependent analytical baseline first quantifies actuator stiffness and actuator-error transmission. Precomputed single-leg compliance matrices at 15 poses then describe the position-dependent gantry response. The formulation adds active-axis compliance in each leg’s physical local frame, represents the SR-link and passive joints analytically, and assembles the three legs using work-conjugate transformations and Schur condensation. The model is assessed fully a priori against loaded and unloaded FARO laser-tracker measurements at 17 matched poses under a 4.55 kg load. The actuator-only baseline gives a platform translation-vector RMSE of 0.73 mm; adding the distributed structural compliance reduces it to 0.36 mm. The corresponding mapped gantry-marker predictions achieve an RMSE of 0.15 mm. The comparison uses no fitted compliance parameter or bias correction. Within the evaluated ranges, the Zaber transverse-stiffness and load-hook offset studies change the predicted translation by at most 1.93% and 2.07%, respectively. The improvement over the actuator-only baseline shows that the distributed gantry, SR-link, passive-joint, and three-leg assembly compliance is essential to the measured gravity response. A systematic platform residual remains and defines a quantitative target for model updating. The framework’s principal value is its modular, physically consistent connection of pose-dependent single-leg FE compliance to whole-robot response. The surrogate and analytical assembly reuse the FE database to predict platform and measurement-point response without a new FE solve at every pose. The framework supports stiffness-aware configuration assessment, sensitivity analysis, experimental design, and future model updating. The 17-pose comparison establishes a quantitative baseline that subsequent refinements must exceed.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ma, Qide
Contributors dc:contributor
  • Wen, Kefei

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/95450

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Ma, Qide. Redundancy-aware hybrid FE–analytical compliance modeling and experimental assessment of a 3-(P-P)PPSR hybrid parallel robot. master's thesis, University of British Columbia, 2026. http://hdl.handle.net/2429/95450