University of Central Florida
Design and Optimization of Temperature-Stable MEMS Resonators for Timing Applications Based on Thin-Film Lithium Tantalate
Abstract
dc:description.abstractAll radio devices require a highly accurate frequency reference with superb temperature stability. While quartz-based oscillators meet accuracy demands, they cannot be easily miniaturized for higher frequencies. Silicon-based MEMS resonators offer a promising alternative due to their small size, and low power consumption, though they suffer from significant temperature drift. This research proposes a silicon-based MEMS device that exhibits low-frequency variations across wide temperature ranges, high-quality factors, and low insertion loss, meeting modern communication system requirements. Two main research avenues are explored. Firstly, the thermal behavior of S0 Lamb wave X-cut Lithium Tantalate (LT) resonators is investigated, demonstrating a zero-temperature coefficient of frequency (i.e., turnover temperature) numerically. These resonators are optimized to achieve high electromechanical coupling and high turnover temperature, crucial for designing micro-oven-controlled oscillators with excellent stability. Experimental fabrication confirms their high-quality factor (~2000 at 200 MHz), high turnover temperature (>80°C), and moderately large effective electromechanical coupling (~5% at 200 MHz). This unique characteristic of S0 Lamb wave X-cut LT resonators is utilized to propose a novel passive temperature compensation method, potentially canceling both first and second-order temperature coefficients of frequency (TCF) in silicon-based resonators. The combined heterostructure of highly doped silicon and rotated X-cut LT resonators, each with opposing quadratic TCF curves, provides near-perfect compensation for temperature-induced frequency fluctuations. Implementing this design with a thin LT film on an SOI wafer resulted in a frequency drift as low as 70 ppm over a temperature range of 20°C to 100°C at a 313 MHz operation frequency, significantly improving over conventional silicon-based resonators. Secondly, the phase noise and temperature dependency of the oscillation frequency are studied. The relationship between thermally-induced frequency fluctuations and phase noise of thin-film Piezoelectric-on-silicon (TPOS) resonators is examined, providing experimental validation for the suppression of overall oscillator circuit noise through operation at the resonator's turnover temperature.
Degree
thesis:*- Grantor dc:publisher
- University of Central Florida
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Majd, Yasaman
- Contributors dc:contributor
-
- Reza Abdolvand
Subjects
dc:subject × 7- Temperature stability
- MEMS resonators
- Lithium tantalate
- X-cut
- Turnover temperature
- Oscillators
- Lithium tantalate; Microelectromechanical systems--Design and construction; Oscillators, Crystal--Materials; Radio frequency oscillators--Design and construction; Electronic circuits--Temperature compensation
Rights
- Language dc:language
- English
Identifiers
dc:identifier.*- Identifier
- DP0029009