Back to search

University of North Texas

Process Improvement of Surface Preparation of Structuraly Bonded Helicopter Detail Parts

Abstract

dc:description

The objective of this study was to increase the bond strength at the surface interface of a thin stainless-steel panel for structural bonding on a helicopter. To achieve this objective, six activation methods for applying the coating to the panel in the surface preparation process are presented and explored. Adhesion and roughness tests were conducted to determine which method consistently initiates the etch and improves the bond at the surface. Based on the test results, three methods proved to be effective in initiating the etch. Of the three effective methods, only one method exhibited significantly improved bond strength at the surface interface as well as consistently initiated the etch in solution. The applicability of this method is discussed, and recommendations are presented for further study.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tafoya, Keirsten Breann
Contributors dc:contributor
  • Young, Marcus L.
  • Scharf, Thomas W.
  • Aouadi, Samir

Subjects

dc:subject × 12

Rights

dc:rights
Statement dc:rights
  • Public
  • Tafoya, Keirsten Breann
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_1405
https://digital.library.unt.edu/ark:/67531/metadc1404599/
ark: ark:/67531/metadc1404599

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Tafoya, Keirsten Breann. Process Improvement of Surface Preparation of Structuraly Bonded Helicopter Detail Parts. University of North Texas, 2018. https://doi.org/10.12794/metadc1404599