University of North Texas
Pretreatment Optimization of Fiberglass Manufacturing Industrial Wastewater
Abstract
dc:descriptionWastewater effluent produced in the fiberglass manufacturing industry contains a significant amount of total suspended solids. Environmental regulations require pretreatment of effluent before it is discharged to the municipal wastewater treatment plant. Chemical precipitation by coagulation and flocculation is the method of pretreatment used at the Vetrotex CertainTeed Corporation (VCT). A treatability study was conducted to determine conditions at which the VCT Wastewater Pretreatment Plant could operate to consistently achieve a total suspended solids concentration ≤ 200-mg/L. Jar tests varied pH, polymer dosage, and ferric sulfate dosage. Total suspended solids and turbidity were measured to evaluate treatment performance. The data were used to determine an optimum set of conditions under project guidelines. Of twelve polymers screened, BPL 594 was selected as the most effective polymer. For cost efficiency in the wastewater pretreatment operation, recommendations suggested that treatment chemical injection be electronically controlled according to turbidity of the treated effluent.
Degree
thesis:*- Grantor dc:publisher
- University of North Texas
- Year dc:date
- 1998
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Dragoo, Ron
- Contributors dc:contributor
-
- Atkinson, Samuel F.
- Dickson, Kenneth L.
- Hudak, Paul F.
Subjects
dc:subject × 7Rights
dc:rights- Statement dc:rights
-
- Public
- Copyright
- Copyright is held by the author, unless otherwise noted. All rights reserved.
- Dragoo, Ron
- Language dc:language
- English
Identifiers
dc:identifier.*- Identifier
-
call-no: 379 N81 no.7553
untcat: b2134071
local-cont-no: 1002660014-Dragoo
https://digital.library.unt.edu/ark:/67531/metadc277875/
ark: ark:/67531/metadc277875