Back to search

University of North Texas

Nominal Shear Strength and Seismic Detailing of Cold-formed Steel Shear Walls using Steel Sheet Sheathing

Abstract

dc:description

In this research, monotonic and cyclic tests on cold-formed steel shear walls sheathed with steel sheets on one side were conducted to (1) verify the published nominal shear strength for 18-mil and 27-mil steel sheets; and (2) investigate the behavior of 6-ft. wide shear walls with multiple steel sheets. In objective 1: this research confirms the discrepancy existed in the published nominal strength of 27-mil sheets discovered by the previous project and verified the published nominal strength of 18 mil sheet for the wind design in AISI S213. The project also finds disagreement on the nominal strength of 18-mil sheets for seismic design, which is 29.0% higher than the published values. The research investigated 6-ft. wide shear wall with four framing and sheathing configurations. Configuration C, which used detailing, could provide the highest shear strength, compared to Configurations A and B. Meanwhile, the shear strength and stiffness of 2-ft. wide and 4-ft. wide wall can be improved by using the seismic detailing.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chen, Yujie
Contributors dc:contributor
  • Yu, Cheng
  • Nasrazadani, Seifollah
  • Arnold, Althea

Subjects

dc:subject × 9

Rights

dc:rights
Statement dc:rights
  • Public
  • Copyright
  • Chen, Yujie
  • Copyright is held by the author, unless otherwise noted. All rights reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
oclc: 696395771
untcat: b3910418
https://digital.library.unt.edu/ark:/67531/metadc30444/
ark: ark:/67531/metadc30444

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Chen, Yujie. Nominal Shear Strength and Seismic Detailing of Cold-formed Steel Shear Walls using Steel Sheet Sheathing. University of North Texas, 2010. https://doi.org/10.12794/metadc30444