University of South Florida
Design of Acoustic Wave Sensor System for Detection of BTEX in Gas Phase
Abstract
dc:descriptionBenzene, toluene, ethylbenzene, and xylene are classified as volatile organic compounds (VOC), which if present at higher concentrations can cause acute and/or chronic health effects. To protect people from VOCs, the occupational safety and health agency (OSHA) established short term and eight-hour workday exposure limits. The short time levels of exposure for BTEX materials are 5 ppm, 150 ppm, 125 ppm, and 150 ppm, for benzene, toluene, ethylbenzene, and xylene respectively. The eight-hour workday exposure for these same materials are 1 ppm for benzene, 200 ppm for toluene, 100 ppm for ethylbenzene and 100 ppm for xylene. Although there are several laboratory instruments, for example GS, MS, PID, that are used for measuring these materials in a laboratory environment. This work shows that acoustic wave sensors should also be considered for monitoring, detecting, and measuring these types of materials. The sensors are not only sensitive, reliable, and easy to operate, but they are also suitable for providing real time measurements.For this thesis work we used a quartz crystal microbalance (QCM) coated with a polymer solvent, and diluted setup that allowed us to successfully detect approximate 500 ppm of these analytes in a gas phase. In our apparatus system, a controlled amount of BTEX was released into a nitrogen flow stream that brought the mixture of Nitrogen and BTEX to the sensor. The concentration of analytes was controlled through a gastight syringe attached to a syringe pump. The nitrogen flow was controlled by a LabVIEW program and mass flow controller. The presence of the plasticizer in the polymer coating increased the sensitivity of the sensor to the tested analytes. We will also show a design of a surface acoustic wave (SAW) test device capable for gas sensing. Using this fixture and a SAW sensor with Rayleigh waves and a polymer coated delay line, we were able to detect 55 ppm of benzene in a gas phase.
Degree
thesis:*- Name thesis:degree_name
- MS in Materials Science and Engineering (M.S.M.S.E)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Chemical Engineering
- Grantor
- University of South Florida
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Mitevska, Veselinka
- Contributors dc:contributor
-
- Venkat R. Bhethanabotla, Ph.D.
- Scott Campbell, Ph.D.
- John Kuhn, Ph.D.
Subjects
dc:subject × 6Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.usf.edu/etd/9701