Back to search

University of South Florida

Simulation of Turbulent Air Jet Impingement for Commercial Cooking Applications

Abstract

dc:description

The research work in this dissertation focuses on turbulent air jet heat transfer for commercial cooking applications. As a part of this study, convective heat transfer coefficient and its interdependency with various key parameters is analyzed for single nozzle turbulent jet impingement. Air is used as the working fluid impinging on the flat surface. A thorough investigation of velocity and temperature distributions is performed by varying nozzle velocity and height over diameter ratio (H/D). Nusselt number and Turbulent Energy are presented for the impingement surface. It was found that for H/D ratios ranging between 6 and 8, nozzle velocities over 20 m/s provide a large percentage increase in heat transfer. Single nozzle jet impingement is followed by study of turbulent multi-jet impingement. Along with parameters mentioned above, spacing over diameter ratio (S/D) is varied. Convective heat transfer coefficient, average impingement surface temperature and heat transfer rate are calculated over the impingement surface. It was found that higher S/D ratios result in higher local heat transfer coefficient values near stagnation point. However, increased spacing between the neighboring jets results in reduced coverage of the impingement surface lowering the average heat transfer. Lower H/D ratios result in higher heat transfer coefficient peaks. The peaks for all three nozzles are more uniform for H/D ratios between 6 and 8. For a fixed nozzle velocity, heat transfer coefficient values are directly proportional to nozzle diameter. For a fixed H/D and S/D ratio, heat transfer rate and average impingement surface temperature increases as the nozzle velocity increases until it reaches a limiting value. Further increase in nozzle velocity causes drop in heat transfer rate due to ingress of large amounts of cold ambient air in the control volume. The final part of this dissertation focuses on case study of conveyor oven. Lessons learned from analysis of single and multi-jet impingement are implemented in the case study. A systematic approach is used to arrive to an optimal configuration of the oven. As compared to starting configuration, for optimized configuration the improvement in average heat transfer coefficient was 22.7%, improvement in average surface heat flux was 24.7% and improvement in leakage air mass flow rate was 59.1%.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (Ph.D.)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
University of South Florida
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shevade, Shantanu S.
Contributors dc:contributor
  • Rasim Guldiken, Ph.D.
  • Muhammad Rahman, Ph.D.
  • Frank Pyrtle III, Ph.D.
  • Sanjukta Bhanja, Ph.D.
  • Yuncheng You, Ph.D.

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/7362

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Shevade, Shantanu S.. Simulation of Turbulent Air Jet Impingement for Commercial Cooking Applications. Dissertation thesis, University of South Florida, 2018. https://digitalcommons.usf.edu/etd/7362