Back to search

Hosted by Utah State University Libraries

Finite Element and Pullout Test Performance of Welded Wire Mats

Abstract

dc:description.abstract

This paper reports on the pullout test performance of welded-wire reinforcing mats. A 126-foot high mechanically stabilized earth wall was constructed at Kennecott Utah Copper. In the lower half of the wall, single lengths of 50-foot long welded-wire mats were used. In the top half of the wall, two lengths of 50-foot mats were overlapped 10 feet to create 90-foot mats. This 10-foot "lap zone" was investigated in this study. The finite element program Plaxis was used to investigate several pullout test parameters: overburden pressure, gap width, boundary effects, and horizontal spacing of transverse elements from the pullout box face. Physical pullout tests were performed in a scale pullout box to compare test configurations with single and multiple layers of mats, and test configurations with single and multiple lap zones. Finally, a Plaxis model of the scale pullout box was created to compare the finite element and pullout test results.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Civil and Environmental Engineering
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Conder, Bradley C.
Contributors dc:contributor
  • James A. Bay
  • Loren R. Anderson
  • Joseph A. Caliendo

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Conder, Bradley C.. Finite Element and Pullout Test Performance of Welded Wire Mats. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/8058