Back to search

Hosted by Utah State University Libraries

Venturi Meter Performance When Installed on the Branch of a Tee Junction with Converging Run Flow

Abstract

dc:description.abstract

Venturi flow meters are often installed downstream of disturbances such as a tee junction, valve, or elbow. In such a case, a laboratory calibration may be needed to measure the Venturi meter’s performance under said limitations so that accurate metering is achieved. However, in some cases, laboratory calibration may not be possible.The purpose of this research was to investigate Computational Fluid Dynamics (CFD) ability to simulate a Venturi meter installed on the branch of a tee junction with converging run flow. This study used CFD to compare against laboratory results to illustrate CFD’s capability as a calibration method. The results of this study were used to develop a procedure to adjust a Venturi meter’s discharge coefficient for a Venturi meter that will be, or already is, installed on the branch of a tee junction with converging run flow.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Civil and Environmental Engineering
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Naulu, E. Elliot
Contributors dc:contributor
  • Michael C. Johnson
  • Zachary B. Sharp
  • Marv Halling

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Naulu, E. Elliot. Venturi Meter Performance When Installed on the Branch of a Tee Junction with Converging Run Flow. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/8150