Thesis (MCom)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: Worldwide, energy has been, and continues to be, key to economic development. However, the current global consensus is that energy-related carbon dioxide emissions would, at current rates, put the world onto a potentially catastrophic trajectory which could lead to global warming of 5 degree Celsius or more compared to pre-industrial times. There is a critical need for a low-carbon development or a move away from conventional fossil fuels energy sources. This study explores impacts of policies that South Africa developed in order to champion sustainable energy strategies based on energy efficiency and non-conventional energy sources, including renewable energy. The mining sector, because of its energy-intensive nature, was chosen. In order to achieve this objective three approaches were carried out: (i) a critical review of literature on energy efficiency (EE) and renewable energy (RE) ; (ii) two case-studies that demonstrate the impacts of the policies; and (iii) action research on a sample of mines using survey questionnaire and interviewing. The research results show that the need to have security in energy and the need to be competitive and grow revenue are significant in deciding to carry out EE and RE initiatives in the mining sector. The results also show that safety followed by production are the priorities and are accompanied by a range of other demands, such as cost reduction and legislative requirements. It is, therefore, within this context that EE and RE initiative will always be carried out in the mining sector. The research concludes that, under the current market framework, South African EE and RE policies are not as effective as hoped they would be. The research, therefore, recommends that a percentage of the mines’ revenue could be dedicated to EE and RE initiatives. In addition, South Africa needs to come up with a new type of productive endeavour that would lead to less extractive industries, including mines. / AFRIKAANSE OPSOMMING: Energie is, was en sal wereldwyd altyd die sleutel wees tot ekonomiese ontwikkeling. Nieteenstaande, word dit wereldwyd aanvaar dat die huidige energie opwekking se koolstofdioksied vrystelling moontlik kan lei tot aardverwarming van 5 grade Celsius of meer wanneer vergelyk met word met pre-industriële tye. Daar is ‘n kritiese behoefte aan lae koolstofdioksied vrystelling ontwikkelings of ‘n beperking van konvensionele fossielbrandstof energiebronne. Hierdie studie analiseer die impak van die Suid Afrikaanse beleid wat ontwikkel is om volhoubare energie te bevorder wat effektief en onkonvensioneel is, insluitend hernubare energie. Die mynsektor, as ‘n groot verbruiker van energie, vorm die kern van die studie. Die studie is voltooi in drie fases naamlik: (1) kritiese oorsig van die literatuur oor energiedoeltreffendheid (EE) en hernubare energie (RE); (2) twee gevallestudies wat die impak van die beleid bevestig; en (3) praktiese navorsing deur middel van vraelyste en persoonlike onderhoude met seker myne. Die navorsing bevestig dat die behoefte aan bestendige energie teen kompeterende pryse wat die mynsektor in staat stel om inkomste te groei ,‘n beduidende invloed het op die besluit om EE of RE inisiatiewe te onderneem. Die resultate bevestig verder dat beroepsveiligheid en produksie uitsette die eerste prioriteite vir die myne is. Dit word verder beinvloed deur kostebesparings en wetlike vereistes. Enige EE en RE inisiatiewe wat onderneem word sal in hierdie konteks plaasvind. Die navorsing kom tot die slotsom dat, onder huidige marktoestande, Suid Afrika se EE en RE beleid nie so effektief is as waarop daar gehoop is nie. Die navorsing beveel derhalwe aan dat ‘n persentasie van myne se inkomste geoormerk moet word vir EE en RE inisiatiewe. Verder meer , Suid Afrika moet strewe na tipes produksie wat minder natuurlike grondstowwe onttrek, insluitend die myne.

The Straits of Florida has been noted as a potential location for extraction of the kydrokinetic energy of the Florida Current, in view of the strength of the current and its proximity to the shore. ... This research explores the Florida Current as a potential renewable energy source. By utilizing historical data, in situ observations of the Florida Current, and computer model data, the hydrokinetic resource of the Florida Current is characterized both spatially and temporally. Subsequently, based on the geographic variability of the hydrokinetic power and other factors that impact the economy of a hydrokinetic turbine array installation, the ideal locations for turbine array installation within the Florida Current are identified.... Additionally, an interactive tool has been developed in which array parameters are input - including installation location, turbine diameter, turbine cut-in speed, etc. - and array extraction estimates, ideal installation position, and water depth at the installation points are output. As ocean model data is prominently used in this research, a discussion about the limitations of the ocean model data and a method for overcoming these limitations are described. Globally, the distribution of hydrokinetic power intensity is evaluated to identify other currents that have a high hydrokinetic resource. / by Alana E. Smentek-Duerr. / Thesis (Ph.D.)--Florida Atlantic University, 2012. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.

The objective of this PhD thesis is to create a Unit Commitment and Economic Dispatch (UCED) modelling tool that can used to simulate the deterministic performance of a power system with thermal and renewable generators and energy storage technologies. The model was formulated using mixed integer programing (MIP) on GAMS interface. A robust commercial solver by IBM (CPLEX) is used as solver. Emphasis on the development of the tool has been given on the following aspects. a) Technical impacts of Variable Renewable Energy (VRE) integration. The UCED model developed in this thesis is a high resolution short-term dispatch model. It captures the variability of VRE power on the intra-hour level. In addition the model considers a large number of important real world, system, unit and policy constraints. Detailed representation of a power system allows for a realistic estimation of maximum penetration levels of VRE and the related technical impacts like cycling of generators (part-loading and number of start-ups). b) CO2 emissions. High levels of VRE penetration can potentially increase consumption of fuel in thermal units per unit of electricity produced due to increased thermal cycling. The dispatch of units in the UCED model is based on minimizing system wide operational costs the most important of those being fuel, start-up costs and the cost of carbon. Fuel consumption is calculated using technical data from Input/Output curves of individual generators. The start-up cost is calculated based on times the generator units have been off and the energy requirement to bring the unit back to hot state. Thus dynamic changes on fuel consumption can be captured and reported. c) Technical solutions to facilitate VRE integration. VRE penetration can be facilitated if appropriate solutions are implemented. Energy storage is an effective way to reduce the impact of RE variability. The UCED model includes an integrated Mixed Integer Linear (MILP) compressed air energy storage (CAES) simulation sub-model. Unlike existing CAES models, the new “Thermo-Economic” (TE) CAES model developed in this thesis uses technical data from major CAES manufacturers to model the dynamic effect of cavern pressure on both the compression and expansion sides during CAES operation. More specifically the TE model takes into account that a) a compressor discharges at a pressure equal to the back-pressure developed in the cavern at each moment, b) the speed of charging can be regulated through inlet guide vanes; higher charging speed can take place at the expense of additional power consumption, c) the maximum power output during expansion can be limited by the levels of cavern pressure; there is a threshold pressure level below which the maximum output decreases linearly with pressure. Since it uses actual power curves to simulate CAES operation, the TE model can be assumed to be more accurate than conventional Fixed Parameter (FP) models that don’t model dynamic effects of cavern pressure on CAES operation. The TE model in this thesis is compared with conventional FP models using historical market prices from the Irish electricity market. The comparison was based on the ability of a CAES unit to arbitrage energy for making profit in the Irish electricity market. More specifically a “Base” scenario was created that included the operation of a 270MW CAES unit with technical characteristics obtained from a major CAES manufacturer and assumed discharge time of 13hr. Various sensitivities on discharge time, natural gas prices and system marginal prices (SMPs) were modeled. An additional scenario was created to show the benefit on CAES profitability if the unit participated in both the energy and ancillary services markets. All scenarios were modeled using both the TE and FP CAES models. The results showed that the most realistic TE model returns around 15% less profitability across more scenarios. The reduction in profitability grows to around 30% when the cavern volume (discharge time) is reduced to half (6 hours). The latter is related to the sensitivity of the TE model on cavern pressure that is being built faster when the volume is reduced. A CAES unit won’t get a positive net present value (NPV) in Ireland under any scenario unless SMPs are greatly increased. Thus, it was shown that that existing FP CAES models overestimate CAES profitability. More accurate models need to be used to estimate CAES profitability in deregulated markets. Additionally, it might deem necessary to create additional markets for energy storage units and increase the possible revenue sources and magnitude to facilitate an increase of storage capacity worldwide. The second step of analysis involved the integration of the CAES and UCED models. The UCED model developed in this thesis was validated and applied using data from the Irish grid, a power system with more than 50 thermal generators. A vast of existent data was used to create a mathematical model of the Irish system. Such data include technical specifications and variables of thermal generators, maintenance schedules and historical solar, wind and demand data. The validation exercise was deemed successful since the UCED model simulated utilization factors of 45 out of 52 generators with an absolute difference between modeled and actual results on utilization factors of less than 6% (the absolute differences are called Delta in this thesis). In addition the results of validation exercise were compared with the results of a similar exercise where PLEXOS was the modelling tool and it was found that the results of the two models were similar for the vast majority of generators. More specifically, the PLEXOS model results showed higher deltas for the coal-fired generators compared to the UCED model. On the other hand the UCED model, reported higher delta values for peat-fired generators. The results of the PLEXOS model were slightly better for the gas-fired generators while both models reported deltas nearly zero for all oil and distillate-fired generators. Finally the model was applied to study the benefits of energy storage in Ireland in 2020 when wind penetration is expected to reach 37% of total demand. The analysis involved the development of two groups of 3 scenarios each. In the first group the main scenario also called the “Reference” was used to simulate the short-term unit (30 min step) commitment within the Irish system without storage. The results of the reference scenario were compared with two additional scenarios that assumed the existence of one 270MW CAES unit in Northern Ireland by 2020 (again the first scenario involved the TE and the second the FP CAES model). The results showed –when using the TE model- that the inclusion of one 270MW CAES unit in AI can help reduce wind curtailment by 88GWh, CO2 emissions by 150,000 tonnes and system costs by € 6 million per year. If an FP model had been used instead the reductions would be: wind curtailment by 108GWh, CO2 emissions by 270,000 tonnes and annual system costs by €13 million. Two main conclusions can be obtained from the specific set of results. The first conclusion is that storage units have a financial benefit over the whole system. Thus, when a CAES unit operates to minimize the costs of the whole system can incur substantially more benefits compared to if the CAES unit operated to maximize the individual unit’s profits as in the case presented earlier. The benefits of storage over the whole system should be accounted to make policy decisions and create incentives for investors to increase energy storage capacity in national grids. The second important conclusion is that existing CAES FP models overestimate the ability of a CAES unit to facilitate VRE penetration. More accurate TE models should be used to assess a unit’s capability to increase system flexibility. A second group of scenarios was created to simulate the benefit of CAES at even higher VRE penetration levels. In the second group the “Reference” scenario again, assumed no storage however, wind production was increased by 25%. Again the “Reference” was compared with two additional scenarios that assumed integration of 3x270MW=810MW of storage capacity in AI (one scenario used the TE model and the other the FP). The results for the TE model show that each of the 3 CAES units reduces wind curtailment by 188,000MWh, total system costs by €29 million and CO2 emissions by 180,000 tonnes. The same reductions for the FP model are 217,000MWh of wind curtailment, €25.6 million on total system costs and 180,000 tonnes of CO2. Thus, the results of the second group of scenarios show that as the installed capacity of both CAES and wind increases in Ireland a) the system-wide benefits of CAES increase and b) the differences on results between the TE and FP models become much smaller.

The developed world relies on an enormous supply of electricity and heat energy to power countless daily activities, predominantly using non-renewable fossil fuels. Although this energy assists people in meeting their basic human needs, the way in which it is produced is at odds with the ability of people to continue to meet their needs in the future. The current trend towards renewable energy generation in the developed world that involves community members is a positive step away from current unsustainable energy practices. A Strategic Sustainable Development (SSD) approach helps to guide planning and decision making by using a vision of a sustainable energy future to assist in undertaking strategic actions. To offer practical support to communities wanting to work towards sustainable energy generation, this research combines the experience of communities undertaking Community Renewable Energy projects with an SSD approach, producing a Sustainable Community Renewable Energy Tool.

M.Tech (Department of Electronic Engineering, Faculty of Engineering and Technology), Vaal University of Technology. / Due to the fickle nature of weather upon which renewable energy sources mostly depend, a shift towards a sustainable renewable energy system should be accompanied with a good intermediate energy storage system, such as a battery bank, set up to store the excess supply from renewable sources during their peak periods. The stored energy can later be utilised to supply a regulated and steady power supply for use during the off-peak periods of these renewable energy sources. Battery banks, however, are often faced with the challenge of charge imbalance due to the disparities that occur in the operating characteristics of the batteries that constitute a bank. When a battery bank with charge imbalance is repeatedly used in applications without an effective battery management system (BMS) through active charge equalisation, there could be an early degradation, loss of efficiency and reduction of service life of the entire batteries in the bank. In this research, a universal battery management system (BMS) in stand-alone photovoltaic application was proposed and designed. The BMS consists majorly of a switched capacitor (SC) active charge equaliser, designed with a unique configuration of high capacitance and relatively low switching frequency, which can be applicable to common battery types used in stand-alone photovoltaic application. The circuit was mathematically optimised to minimise losses attributed to impulsive charging and tested with lead acid, silver calcium, lead calcium and lithium ion batteries being commonly used in stand-alone photovoltaic application. The SC design was verified by comparing its simulation results to the digital oscilloscope results, and with both results showing similar values and graphs, the design configuration was validated. The design introduced a simple control strategy and less complicated circuit configuration process, which can allow an easy setup for local usage. The benefit of its multiple usage with different stand-alone photovoltaic battery types saves the cost of purchasing a different charger and balancer for different battery types. More so, the design is solar energy dependent. This could provide an additional benefit for usage in areas where energy dependence is off-grid.

No description available.

Yes / This paper uses a new measure of international trade, i.e. the international trade potential index, to measure the welfare gains from trade across countries. The measure is based on the import shares of countries in their gross domestic products. It is observed that gains from international trade are low in prosperous economies, but they are larger in poorer economies. Then, the paper investigates the impact of the index of international trade potential on renewable energy consumption in the unbalanced panel dataset of 36 Organisation for Economic Co-operation and Development member countries from 1966 to 2016. The novel evidence is that international trade potential is positively related to renewable energy consumption. It is also found that per capita income, per capita carbon dioxide emissions, and energy prices increase the demand for renewable energy. / The authors acknowledge the financial support from the Philosophy & Social Science Fund of Tianjin City, China (Award #: TJYJ20-012).

Decentralized renewable energy procurement has gained traction in recent years for its potential to alleviate rural energy poverty and environmental degradation in developing countries. Hence, this study investigates if deploying renewable energy can mitigate rural energy poverty in developing countries as often claimed. Because any energy regime cannot be initiated or sustained without the conviction of local political leaders, the study also evaluates the extent to which government investments in the development of renewable energy technologies and the energy sector, affect the environmental quality (i.e. greenhouse gas emissions) of developing countries. Energetic theory and environmental inequality constitute the key conceptual premises guiding this study. Ordinary least squares regression is utilized to analyze the relationship between key variables. The results reveal that as of 2010, use of renewable energy can indeed support rural electrification. Higher GNI per capita and use of conventional fuels are also positively related to rural electrification, all else equal. As for environmental degradation in 2005 and 2008, R&D investments actually tend to increase GHG emissions; procuring energy from either renewable or non-renewable sources is however, found to be environmentally detrimental, net of all other variables. Finally, some evidence is found for the role of aid funds and multilateral debt in abating GHG emissions.

Government officials in the Caribbean are encouraging the production of electricity from renewable energy sources to reduce the impact of high electricity rates to customers due to region's dependency on imported fossil fuel. The purpose of this single-case study was to explore the strategies electric utility managers in the Caribbean used to implement renewable energy technologies. The diffusion of innovation theory served as the conceptual framework for the study. Three managers of an electric utility in the Caribbean, who had created strategies to implement renewable energy technologies, participated in face-to-face semistructured interviews. These managers provided in-depth information on approaches used to implement these technologies. Three themes emerged from the thematic analysis of data that were collected from the semistructured interviews and document reviews: development and integration of renewable energy technologies into utility operations, avoidance of future investments in fossil fuels, and inclusion of key stakeholders in the transition to implementing renewable energy technologies. The implications for social change to the Caribbean region from a successful implementation of the technologies may include employment opportunities through the creation of new industries, eradication of energy poverty, and a healthier and cleaner environment. Also, government officials can save significant foreign exchange by not having to import fossil fuel for electricity generation and use these savings to invest in other sectors that can provide further economic and social growth for the people of the region.

The huge natural energy resources available in the world’s oceans are attracting increasing commercial and political interest. In order to evaluate the status and the degree of acceptability of future Ocean Energy (OE) schemes, it was considered important to develop an Integrated Assessment Methodology (IAM) for ascertaining the relative merits of the competing OE devices being proposed. Initial studies included the gathering of information on the present status of development of the ocean energy systems on wave, OTEC and tidal schemes with the challenges faced for their commercial application. In order to develop the IAM, studies were undertaken for the development and standardization of the assessment tools focussing on: • Life Cycle Assessment (LCA) on emission characteristics. • Energy Accounting (EA) studies. • Environmental Impact Assessment (EIA) over different environmental issues. • Resource captures aspects. • Defining economy evaluation indices. The IAM developed from such studies comprised of four interrelated well defined tasks and six assessment tools. The tasks included the identification of the modus operandi on data collection to be followed (from industry) for assessing respective OE devices, and also advancing relevant guidelines as to the safety standards to be followed, for their deployment at suitable sites. The IAM as developed and validated from case studies in ascertaining relative merits of competing OE devices included: suitable site selection aspects with scope for resource utilisation capability, safety factors for survivability, scope for addressing global warming & energy accounting, the environmental impact assessment both qualitatively and quantitatively on different environmental issues, and the economic benefits achievable. Some of the new ideas and concepts which were also discovered during the development of the IAM, and considered useful to both industry and researchers are given below: • Relative Product Cost (RPC) ratio concept- introduced in making an economic evaluation. This is considered helpful in sensitivity analysis and making design improvements (hybridising etc) for the cost reduction of OE devices. This index thus helps in making feasibility studies on R&D efforts, where the capital cost requirement data and life span of the device is not well defined in the primary stages of development. • Determination of the threshold limit value of the barrage constant - considered useful in determining the efficacy of the planning process. The concept ascertained the relative efficiency achieved for various barrage proposals globally. It could also be applied to suggest the revisions required for certain barrage proposals and also found useful in predicting the basin area of undefined barrage proposal for achieving economic viability. • Estimations made on the future possibility of revenue earnings from the by-products of various OTEC types, including the scope of chemical hubs from grazing type OTEC plants. • Determination of breakeven point- on cost versus life span of wave and OTEC devices studied, which is useful in designing optimum life of the concerned devices. The above stated multi-criterion assessment methodology, IAM, was extended leading to the development of a single criterion model for ascertaining sustainability percent achievable from an OE device and termed IAMs. The IAMs was developed identifying 7 Sustainability Development Indices (SDI) using some the tools of the IAM. A sustainability scale of 0-100 was also developed, attributing a Sustainability Development Load Score (SDLS) percentage distribution pattern over each SDIs, depending on their relative importance in achieving sustainability. The total sum of sustainability development (SD) gained from each SDI gave the IAMs (for the concerned device), indicating the total sustainable percentage achieved. The above IAMs developed, could be applied in ranking OE devices alongside the unsustainable coal power station. A mathematical model of estimating the IAMs was formulated, in order to ascertain the viability to the sustainable development of any energy device. The instruments of IAM and IAMs which have been developed would be helpful to the OE industry in ascertaining the degree of acceptability of their product. In addition it would also provide guidelines for their safe deployment by assessing the relative merits of competing devices. Furthermore, IAM and IAMs would be helpful to researchers undertaking feasibility studies on R&D efforts for material development research, ‘hybridization studies’ (as also new innovations), cost reduction, the performance improvement of respective devices, and any economic gains. With future advancements in OE systems and the availability of field data from large scale commercial applications, the specific values/data of the IAM & IAMs may be refined, but the logic of the models developed in this research would remain the same.