Spelling suggestions: "subject:", beamforming"" "subject:", teamforming""
321 |
Filtragem adaptativa de baixa complexidade computacional. / Low-complexity adaptive filtering.Almeida Neto, Fernando Gonçalves de 20 February 2015 (has links)
Neste texto são propostos algoritmos de filtragem adaptativa de baixo custo computacional para o processamento de sinais lineares no sentido amplo e para beamforming. Novas técnicas de filtragem adaptativa com baixo custo computacional são desenvolvidas para o processamento de sinais lineares no sentido amplo, representados por números complexos ou por quaternions. Os algoritmos propostos evitam a redundância de estatísticas de segunda ordem na matriz de auto correlação, o que é obtido por meio da substituição do vetor de dados original por um vetor de dados real contendo as mesmas informações. Dessa forma, evitam-se muitas operações entre números complexos (ou entre quaternions), que são substituídas por operações entre reais e números complexos (ou entre reais e quaternions), de menor custo computacional. Análises na media e na variância para qualquer algoritmo de quaternions baseados na técnica least-mean squares (LMS) são desenvolvidas. Também é obtido o algoritmo de quaternions baseado no LMS e com vetor de entrada real de mais rápida convergência. Uma nova versão estável e de baixo custo computacional do algoritmo recursive least squares (RLS) amplamente linear também é desenvolvida neste texto. A técnica é modificada para usar o método do dichotomous coordinate descent (DCD), resultando em uma abordagem de custo computacional linear em relação ao comprimento N do vetor de entrada (enquanto o algoritmo original possui custo computacional quadrático em N). Para aplicações em beamforming, são desenvolvidas novas técnicas baseadas no algoritmo adaptive re-weighting homotopy. As novas técnicas são aplicadas para arrays em que o número de fontes é menor do que o número de sensores, tal que a matriz de auto correlação se torna mal-condicionada. O algoritmo DCD é usado para obter uma redução adicional do custo computacional. / In this text, low-cost adaptive filtering techniques are proposed for widely-linear processing and beamforming applications. New reduced-complexity versions of widely-linear adaptive filters are proposed for complex and quaternion processing. The low-cost techniques avoid redundant secondorder statistics in the autocorrelation matrix, which is obtained replacing the original widely-linear data vector by a real vector with the same information. Using this approach, many complex-complex (or quaternion-quaternion) operations are substituted by less costly real-complex (or real-quaternion) computations in the algorithms. An analysis in the mean and in the variance is performed for quaternion-based techniques, suitable for any quaternion least-mean squares (LMS) algorithm. The fastest-converging widely-linear quaternion LMS algorithm with real-valued input is obtained. For complex-valued processing, a low-cost and stable version of the widely-linear recursive least-squares (RLS) algorithm is also developed. The widely-linear RLS technique is modified to apply the dichotomous coordinate descent (DCD) method, which leads to an algorithm with computational complexity linear on the data vector length N (in opposition to the original WL technique, for which the complexity is quadratic in N). New complex-valued techniques based on the adaptive re-weighting homotopy algorithm are developed for beamforming. The algorithms are applied to sensor arrays in which the number of interferer sources is less than the number of sensors, so that the autocorrelation matrix is ill-conditioned. DCD iterations are applied to further reduce the computational complexity.
|
322 |
Linear Algebra for Array Signal Processing on a Massively Parallel Dataflow ArchitectureSavaş, Süleyman January 2009 (has links)
This thesis provides the deliberations about the implementation of Gentleman-Kung systolic array for QR decomposition using Givens Rotations within the context of radar signal processing. The systolic array of Givens Rotations is implemented and analysed using a massively parallel processor array (MPPA), Ambric Am2045. The tools that are dedicated to the MPPA are tested in terms of engineering efficiency. aDesigner, which is built on eclipse environment, is used for programming, simulating and performance analysing. aDesigner has been produced for Ambric chip family. 2 parallel matrix multiplications have been implemented to get familiar with the architecture and tools. Moreover different sized systolic arrays are implemented and compared with each other. For programming, ajava and astruct languages are provided. However floating point numbers are not supported by the provided languages. Thus fixed point arithmetic is used in systolic array implementation of Givens Rotations. Stable and precise numerical results are obtained as outputs of the algorithms. However the analysis results are not reliable because of the performance analysis tools.
|
323 |
Filtragem adaptativa de baixa complexidade computacional. / Low-complexity adaptive filtering.Fernando Gonçalves de Almeida Neto 20 February 2015 (has links)
Neste texto são propostos algoritmos de filtragem adaptativa de baixo custo computacional para o processamento de sinais lineares no sentido amplo e para beamforming. Novas técnicas de filtragem adaptativa com baixo custo computacional são desenvolvidas para o processamento de sinais lineares no sentido amplo, representados por números complexos ou por quaternions. Os algoritmos propostos evitam a redundância de estatísticas de segunda ordem na matriz de auto correlação, o que é obtido por meio da substituição do vetor de dados original por um vetor de dados real contendo as mesmas informações. Dessa forma, evitam-se muitas operações entre números complexos (ou entre quaternions), que são substituídas por operações entre reais e números complexos (ou entre reais e quaternions), de menor custo computacional. Análises na media e na variância para qualquer algoritmo de quaternions baseados na técnica least-mean squares (LMS) são desenvolvidas. Também é obtido o algoritmo de quaternions baseado no LMS e com vetor de entrada real de mais rápida convergência. Uma nova versão estável e de baixo custo computacional do algoritmo recursive least squares (RLS) amplamente linear também é desenvolvida neste texto. A técnica é modificada para usar o método do dichotomous coordinate descent (DCD), resultando em uma abordagem de custo computacional linear em relação ao comprimento N do vetor de entrada (enquanto o algoritmo original possui custo computacional quadrático em N). Para aplicações em beamforming, são desenvolvidas novas técnicas baseadas no algoritmo adaptive re-weighting homotopy. As novas técnicas são aplicadas para arrays em que o número de fontes é menor do que o número de sensores, tal que a matriz de auto correlação se torna mal-condicionada. O algoritmo DCD é usado para obter uma redução adicional do custo computacional. / In this text, low-cost adaptive filtering techniques are proposed for widely-linear processing and beamforming applications. New reduced-complexity versions of widely-linear adaptive filters are proposed for complex and quaternion processing. The low-cost techniques avoid redundant secondorder statistics in the autocorrelation matrix, which is obtained replacing the original widely-linear data vector by a real vector with the same information. Using this approach, many complex-complex (or quaternion-quaternion) operations are substituted by less costly real-complex (or real-quaternion) computations in the algorithms. An analysis in the mean and in the variance is performed for quaternion-based techniques, suitable for any quaternion least-mean squares (LMS) algorithm. The fastest-converging widely-linear quaternion LMS algorithm with real-valued input is obtained. For complex-valued processing, a low-cost and stable version of the widely-linear recursive least-squares (RLS) algorithm is also developed. The widely-linear RLS technique is modified to apply the dichotomous coordinate descent (DCD) method, which leads to an algorithm with computational complexity linear on the data vector length N (in opposition to the original WL technique, for which the complexity is quadratic in N). New complex-valued techniques based on the adaptive re-weighting homotopy algorithm are developed for beamforming. The algorithms are applied to sensor arrays in which the number of interferer sources is less than the number of sensors, so that the autocorrelation matrix is ill-conditioned. DCD iterations are applied to further reduce the computational complexity.
|
324 |
Efficient FPGA SoC Processing Design for a Small UAV RadarNewmeyer, Luke Oliver 01 April 2018 (has links)
Modern radar technology relies heavily on digital signal processing. As radar technology pushes the boundaries of miniaturization, computational systems must be developed to support the processing demand. One particular application for small radar technology is in modern drone systems. Many drone applications are currently inhibited by safety concerns of autonomous vehicles navigating shared airspace. Research in radar based Detect and Avoid (DAA) attempts to address these concerns by using radar to detect nearby aircraft and choosing an alternative flight path. Implementation of radar on small Unmanned Air Vehicles (UAV), however, requires a lightweight and power efficient design. Likewise, the radar processing system must also be small and efficient.This thesis presents the design of the processing system for a small Frequency Modulated Continuous Wave (FMCW) phased array radar. The radar and processing is designed to be light-weight and low-power in order to fly onboard a UAV less than 25 kg in weight. The radar algorithms for this design include a parallelized Fast Fourier Transform (FFT), cross correlation, and beamforming. Target detection algorithms are also implemented. All of the computation is performed in real-time on a Xilinx Zynq 7010 System on Chip (SoC) processor utilizing both FPGA and CPU resources.The radar system (excluding antennas) has dimensions of 2.25 x 4 x 1.5 in3, weighs 120 g, and consumes 8 W of power of which the processing system occupies 2.6 W. The processing system performs over 652 million arithmetic operations per second and is capable of performing the full processing in real-time. The radar has also been tested in several scenarios both airborne on small UAVs as well as on the ground. Small UAVs have been detected to ranges of 350 m and larger aircraft up to 800 m. This thesis will describe the radar design architecture, the custom designed radar hardware, the FPGA based processing implementations, and conclude with an evaluation of the system's effectiveness and performance.
|
325 |
Linear Algebra for Array Signal Processing on a Massively Parallel Dataflow ArchitectureSavaş, Süleyman January 2008 (has links)
<p>This thesis provides the deliberations about the implementation of Gentleman-Kung systolic array for QR decomposition using Givens Rotations within the context of radar signal </p><p>processing. The systolic array of Givens Rotations is implemented and analysed using a massively parallel processor array (MPPA), Ambric Am2045. The tools that are dedicated to the MPPA are tested in terms of engineering efficiency. aDesigner, which is built on eclipse environment, is used for programming, simulating and performance analysing. aDesigner has been produced for Ambric chip family. 2 parallel matrix multiplications have been implemented </p><p>to get familiar with the architecture and tools. Moreover different sized systolic arrays are implemented and compared with each other. For programming, ajava and astruct languages are provided. However floating point numbers are not supported by the provided languages. </p><p>Thus fixed point arithmetic is used in systolic array implementation of Givens Rotations. Stable and precise numerical results are obtained as outputs of the algorithms. However the analysis </p><p>results are not reliable because of the performance analysis tools.</p>
|
326 |
Linear Algebra for Array Signal Processing on a Massively Parallel Dataflow ArchitectureSavaş, Süleyman January 2009 (has links)
<p>This thesis provides the deliberations about the implementation of Gentleman-Kung systolic array for QR decomposition using Givens Rotations within the context of radar signal processing. The systolic array of Givens Rotations is implemented and analysed using a massively parallel processor array (MPPA), Ambric Am2045. The tools that are dedicated to the MPPA are tested in terms of engineering efficiency. aDesigner, which is built on eclipse environment, is used for programming, simulating and performance analysing. aDesigner has been produced for Ambric chip family. 2 parallel matrix multiplications have been implemented to get familiar with the architecture and tools. Moreover different sized systolic arrays are implemented and compared with each other. For programming, ajava and astruct languages are provided. However floating point numbers are not supported by the provided languages. Thus fixed point arithmetic is used in systolic array implementation of Givens Rotations. Stable </p><p>and precise numerical results are obtained as outputs of the algorithms. However the analysis results are not reliable because of the performance analysis tools.</p>
|
327 |
Coordinated Beamforming and Common Message Decoding for Intercell Interference Mitigation in Multicell NetworksDahrouj, Hayssam 15 February 2011 (has links)
Conventional multicell wireless systems operate with out-of-cell interference treated as background noise; consequently, their performance faces two major limitations: 1)Signal processing is performed on a per-cell basis; and 2)Intercell interference detection is infeasible as intercell interference, although significantly above the noise level, is typically quite weak. In this thesis, we consider a multicell downlink scenario, where base-stations are equipped with multiple transmit antennas, the remote users are equipped with a single antenna, and multiple remote users are active simultaneously via spatial division multiplexing. We propose solutions for the above limitations by considering techniques for mitigating interference.
The first part of the thesis proposes solutions for the first limitation. It considers the benefit of coordinating base-stations across multiple cells, where
multiple base-stations may jointly optimize their respective beamformers to improve the overall system performance. It focuses on the design criteria of minimizing either the total weighted transmitted power or the maximum per-antenna power across the base-stations subject to signal-to-interference-and-noise-ratio (SINR) constraints at the remote users. The main contribution of this part is an efficient algorithm for finding the joint globally optimal beamformers across all base-stations. The proposed algorithm is based on a generalization of uplink-downlink duality to the multicell setting using the Lagrangian duality theory. An important feature is that it naturally leads to a distributed implementation in time-division duplex (TDD) systems. Simulation results suggest that coordinating the beamforming vectors alone already provides appreciable performance improvements as compared to the conventional per-cell optimized network.
The second part of the thesis considers the transmission of both private and common messages for the sole purpose of intercell
interference mitigation. It solves the issues of the second limitation mentioned above. It considers the benefit of designing
decodable interference signals by allowing common-private message splitting at the transmitter and common message decoding by users in adjacent cells. It solves a network optimization problem of jointly determining the appropriate users in adjacent cells for
rate splitting, the optimal beamforming vectors for both common and private messages, and the optimal common-private rates to minimize the total transmit power across the base-stations subject to service rate requirements for remote users. Observe that for fixed user selection and fixed common-private rate splitting, the optimization of beamforming vectors can be performed using a semidefinite programming approach. Further, this part of the thesis proposes a heuristic user-selection and rate splitting strategy to maximize the benefit of common message decoding. This part proposes a heuristic algorithm to characterize the improvement in the feasible rates with common-message decoding. Simulation results show that common message decoding can significantly improve both the total transmit power and the feasibility region for cell-edge users when base-stations are closely spaced from each other.
|
328 |
Coordinated Beamforming and Common Message Decoding for Intercell Interference Mitigation in Multicell NetworksDahrouj, Hayssam 15 February 2011 (has links)
Conventional multicell wireless systems operate with out-of-cell interference treated as background noise; consequently, their performance faces two major limitations: 1)Signal processing is performed on a per-cell basis; and 2)Intercell interference detection is infeasible as intercell interference, although significantly above the noise level, is typically quite weak. In this thesis, we consider a multicell downlink scenario, where base-stations are equipped with multiple transmit antennas, the remote users are equipped with a single antenna, and multiple remote users are active simultaneously via spatial division multiplexing. We propose solutions for the above limitations by considering techniques for mitigating interference.
The first part of the thesis proposes solutions for the first limitation. It considers the benefit of coordinating base-stations across multiple cells, where
multiple base-stations may jointly optimize their respective beamformers to improve the overall system performance. It focuses on the design criteria of minimizing either the total weighted transmitted power or the maximum per-antenna power across the base-stations subject to signal-to-interference-and-noise-ratio (SINR) constraints at the remote users. The main contribution of this part is an efficient algorithm for finding the joint globally optimal beamformers across all base-stations. The proposed algorithm is based on a generalization of uplink-downlink duality to the multicell setting using the Lagrangian duality theory. An important feature is that it naturally leads to a distributed implementation in time-division duplex (TDD) systems. Simulation results suggest that coordinating the beamforming vectors alone already provides appreciable performance improvements as compared to the conventional per-cell optimized network.
The second part of the thesis considers the transmission of both private and common messages for the sole purpose of intercell
interference mitigation. It solves the issues of the second limitation mentioned above. It considers the benefit of designing
decodable interference signals by allowing common-private message splitting at the transmitter and common message decoding by users in adjacent cells. It solves a network optimization problem of jointly determining the appropriate users in adjacent cells for
rate splitting, the optimal beamforming vectors for both common and private messages, and the optimal common-private rates to minimize the total transmit power across the base-stations subject to service rate requirements for remote users. Observe that for fixed user selection and fixed common-private rate splitting, the optimization of beamforming vectors can be performed using a semidefinite programming approach. Further, this part of the thesis proposes a heuristic user-selection and rate splitting strategy to maximize the benefit of common message decoding. This part proposes a heuristic algorithm to characterize the improvement in the feasible rates with common-message decoding. Simulation results show that common message decoding can significantly improve both the total transmit power and the feasibility region for cell-edge users when base-stations are closely spaced from each other.
|
329 |
Baseband Processing in Analog Combining MIMO Systems: From Theoretical Design to FPGA ImplementationElvira Arregui, Víctor 21 July 2011 (has links)
In this thesis, we consider an analog antenna combining architecture for a MIMO wireless transceiver, while pointing out its advantages with respect to the traditional MIMO architectures. In the first part of this work, we focus on the transceiver design, especially the calculation of the beamformers that must be applied at the RF. This analysis is performed in an OFDM system under different assumptions on the channel state information. As a result, several criteria and algorithms for the selection of the beamformers are proposed. In the second part, we address the FPGA design and implementation of a baseband processor for this architecture. This baseband processor is based on the standard IEEE 802.11a. Finally, some real-time tests of the implemented baseband processor are carried out both in stand-alone configuration and also with the whole physical layer setup. / En esta tesis consideramos una arquitectura de combinación analógica de antenas para una estación inalámbrica MIMO, señalando las ventajas de ésta con respecto a la arquitectura tradicional MIMO. En la primera parte de este trabajo analizamos el cálculo de los pesos que se deben aplicar en RF. Este análisis es realizado para un sistema OFDM bajo diferentes suposiciones sobre el conocimiento del canal en el transmisor. Como resultado, se ofrecen varios criterios y algoritmos para el cálculo de los pesos. La segunda parte se centra en el diseño y la implementación FPGA de un procesador banda base para esta arquitectura. Este procesador está basando en el estándar IEEE 802.11a. Finalmente se llevan a cabo algunos experimentos en tiempo-real del procesador banda base. Estos experimentos se han realizado tanto con el procesador aislado como integrado en el resto de la capa física del sistema.
|
330 |
Diversity Multiplexing Tradeoff and Capacity Results in Relayed Wireless NetworksOveis Gharan, Shahab January 2010 (has links)
This dissertation studies the diversity multiplexing tradeoff and the capacity of wireless multiple-relay network.
In part 1, we study the setup of the parallel Multi-Input Multi-Output (MIMO)
relay network. An amplify-and-forward relaying scheme, Incremental Cooperative
Beamforming, is introduced and shown to achieve the capacity of the network in
the asymptotic case of either the number of relays or the power of each relay goes to infinity.
In part 2, we study the general setup of multi-antenna multi-hop multiple- relay network. We propose a new scheme, which we call random sequential (RS), based on the amplify-and-forward relaying. Furthermore, we derive diversity- multiplexing tradeoff (DMT) of the proposed RS scheme for general single-antenna multiple-relay networks. It is shown that for single-antenna two-hop multiple- access multiple-relay (K > 1) networks (without direct link between the source(s) and the destination), the proposed RS scheme achieves the optimum DMT.
In part 3, we characterize the maximum achievable diversity gain of the multi- antenna multi-hop relay network and we show that the proposed RS scheme achieves the maximum diversity gain.
In part 4, RS scheme is utilized to investigate DMT of the general multi-antenna multiple-relay networks. First, we study the case of a multi-antenna full-duplex single-relay two-hop network, for which we show that the RS achieves the optimum DMT. Applying this result, we derive a new achievable DMT for the case of multi-antenna half-duplex parallel relay network. Interestingly, it turns out that the DMT of the RS scheme is optimum for the case of multi-antenna two parallel non-interfering half-duplex relays. Furthermore, we show that random unitary matrix multiplication also improves the DMT of the Non-Orthogonal AF relaying scheme in the case of a multi-antenna single relay channel. Finally, we study the general case of multi-antenna full-duplex relay networks and derive a new lower-bound on its DMT using the RS scheme.
Finally, in part 5, we study the multiplexing gain of the general multi-antenna multiple-relay networks. We prove that the traditional amplify-forward relaying achieves the maximum multiplexing gain of the network. Furthermore, we show that the maximum multiplexing gain of the network is equal to the minimum vertex cut-set of the underlying graph of the network, which can be computed in polynomial time in terms of the number of network nodes. Finally, the argument is extended to the multicast and multi-access scenarios.
|
Page generated in 0.118 seconds