No description available.

The frequency dependence and temperature dependence of the complex dielectric constant of water is of great interest. The temperature dependence of the physical properties of water given in the literature, specific heat, thermal conductivity, electric conductivity, pH, etc. are compared to the a. c. (microwave) and d. c. conductivity of water with a variety of concentration of different substances such as HC1, NaCl, HaS04, etc. When each of these properties is plotted versus inverse absolute temperature, it can be seen that each sample shows "transition temperatures". In this work, Slater's perturbation equations for a resonant microwave cavity were used to analyze the experimental results for the microwave data.

With combination of the both ferroelectric and ferromagnetic and mutural coupling properties, multiferroics attracts a lot of researcher¡¦s attentions. Among these very popular materials, such as REMnO (113 series, 125 series), BiFeO3 etc¡K , the BiFeO3 interests us the most for it manifests multiferroic effects above the room temperature. However, the pure BiFeO3 phase is very difficult to form and a serious lost of Bi creates complex grain boundaries that produces enormous electric leaking. In this study, Pb is doped into BiFeO3 in Bi sites and we hope this doping effect may increase the stability and the ferroelectricity of Bi1-xPbxFeO3. It is found that the crystal structure is changed dramatically, because of the doping of Pb, from the rhombohedra structure of the parent pure BiFeO3 to the cubic structure of Bi0.85Pb0.15FeO3. By the Pb doping, the compounds exhibit free from impurity phases and the dielectric constants are enhanced qualitatively to the doping levels.

No description available.

Desenvolveu-se um sistema para medir a constante dielétrica complexa de amostras dielétricas, de construção simples, versátil e de baixo custo. A medida é feita aplicando-se uma tensão senoidal e fazendo-se a aquisição do sinal aplicado e do sinal da resposta elétrica (carga elétrica). Emprega-se uma placa A/D para a aquisição de dados com taxa de amostragem de 100 Ksamples/seg e através da transformada de Fourier discreta destes sinais determina-se a impedância complexa da amostra, a partir da qual calcula-se a constante dielétrica complexa. A placa utilizada e o circuito de medida da carga elétrica introduzem defasagens indesejáveis nos sinais, cujas correções são feitas através de programa no computador usado para aquisição dos sinais. O sistema mostra um desempenho similar àqueles dos equipamentos comerciais para freqüências no intervalo de 0,1H.z a 1KHz, sendo testado com componentes resistivos e capacitivos e posteriormente em amostras de Teflon FEP, poli(fluoreto de vinilideno) e seus copolímeros com trifluoretileno. O sistema também foi utilizado para medir o deslocamento elétrico nos polímeros ferroelétricos sob a aplicação de campos elevados. Neste caso determinaram-se as curvas de histerese dielétrica e os deslocamentos de primeira, segunda e terceira ordem. / A low cost and a simple experimental system for measuring the complex dielectric constant of dielectric samples were developed. Measurements were performed measuring the electric charge response resulting from the application of a sinusoidal voltage. The system was based on an A/D acquisition board with sampling rate of 100 Ksamples/sec. The complex impedance was calculated using the discrete Fourier transform from which the complex dielectric constant was found. The phase differences introduced by the A/D board and the amplifiers circuits were connected by software. The setup showed that the results are comparable to that ones obtained with commercial impedance analyzers in the range of frequencies between 0.1 Hz and 1 KHz. Such measurements were obtained using resistors and/or capacitors and also using samples of Teflon FEP, PVDF and its copolymers with trifluorethylene. The setup was also capable to measure the electric displacement in ferroelectric polymers submitted to high fields. Hysteresis loops and the nonlinear electric displacement of first, second and third order were measured.

Scientists and engineers measure dielectric constant because it gives them better understanding of materials and helps them to know how to integrate these materials into their design processes;it also helps them to shorten design life cycle,and aside these two functions,it has numerous uses all of which cannot be enumerated in this section.Owing to its usefulness,various measurement methods of dielectric constant of materials have been developed over the years.Each method has its limitations which affect the accuracy of the measurement;these limitations range from frequency,temperature,and  mearsurement environment to material under test.   In this thesis,four most common methods of measuring dielectric constant were discussed and the most accurate one,the resonant method,was chosen and worked on .The project was executed by making a mathematical analysis of the ring resonator which was later simulated in HFSS to get results which would be comparable to ones obtained in  laboratory measurements.   The ring was fabricated and taken to the laboratory for measurement.Two monopole antennas were connected to the two ports of a VNA with one antenna serving as the transmitter and the other serving as the receiver.   The resonant frequencies obtained were combined with the geometric parameters of the ring resonator and that of the MUT in equations written into MATLAB scripts;this equations were used to extract the dielectric constant of the MUT.

Desenvolveu-se um sistema para medir a constante dielétrica complexa de amostras dielétricas, de construção simples, versátil e de baixo custo. A medida é feita aplicando-se uma tensão senoidal e fazendo-se a aquisição do sinal aplicado e do sinal da resposta elétrica (carga elétrica). Emprega-se uma placa A/D para a aquisição de dados com taxa de amostragem de 100 Ksamples/seg e através da transformada de Fourier discreta destes sinais determina-se a impedância complexa da amostra, a partir da qual calcula-se a constante dielétrica complexa. A placa utilizada e o circuito de medida da carga elétrica introduzem defasagens indesejáveis nos sinais, cujas correções são feitas através de programa no computador usado para aquisição dos sinais. O sistema mostra um desempenho similar àqueles dos equipamentos comerciais para freqüências no intervalo de 0,1H.z a 1KHz, sendo testado com componentes resistivos e capacitivos e posteriormente em amostras de Teflon FEP, poli(fluoreto de vinilideno) e seus copolímeros com trifluoretileno. O sistema também foi utilizado para medir o deslocamento elétrico nos polímeros ferroelétricos sob a aplicação de campos elevados. Neste caso determinaram-se as curvas de histerese dielétrica e os deslocamentos de primeira, segunda e terceira ordem. / A low cost and a simple experimental system for measuring the complex dielectric constant of dielectric samples were developed. Measurements were performed measuring the electric charge response resulting from the application of a sinusoidal voltage. The system was based on an A/D acquisition board with sampling rate of 100 Ksamples/sec. The complex impedance was calculated using the discrete Fourier transform from which the complex dielectric constant was found. The phase differences introduced by the A/D board and the amplifiers circuits were connected by software. The setup showed that the results are comparable to that ones obtained with commercial impedance analyzers in the range of frequencies between 0.1 Hz and 1 KHz. Such measurements were obtained using resistors and/or capacitors and also using samples of Teflon FEP, PVDF and its copolymers with trifluorethylene. The setup was also capable to measure the electric displacement in ferroelectric polymers submitted to high fields. Hysteresis loops and the nonlinear electric displacement of first, second and third order were measured.

The objective of this thesis is to develop a complex dielectric properties sensor using interdigitated capacitor (IDC) structure. IDCs are easy to fabricate and because of its planar structure, it can be easily integrated with other sensing components and signal processing electronics. The design, fabrication, modeling, and testing of IDC sensors are presented in this thesis. Design parameters and their influence on sensor's output signals are discussed. Previous IDC models are reviewed and the limitations are studied. A new equivalent circuit model based on the fringing electric field distribution and a novel iterative data extraction algorithm combining Finite-Element Method (FEM) and the equivalent circuit model is studied. Results suggest that the algorithm can accurately extract relatively low dielectric constant and conductivity of material under test (MUT) from measured impedance data. / text

Approved for public release; distribution is unlimited / A general study of conductor backed coplanar waveguide is presented. The impedance (Z(0)) and effective dielectric constant (ɛ(reff)) of conductor-backed coplanar waveguide (CBCPW) have been calculated by using a variational method and the boundary point matching method. In this present work only the TEM dominant low frequency propagation mode of coplanar line has been considered. Experimental facilities are vector network analyzer (HP8409) and bench-instrument measurements. / http://archive.org/details/evaluationofcopl00jeon / Captain, Korean Air Force

Approved for public release / This research was part of an ongoing program studying the concept of multi-material dielectrics (MMD) with dielectric constants much higher than homogenous materials. MMD described in this study have dielectric constants six orders of magnitude greater than the best single materials. This is achieved by mixing conductive particles with an insulating surface layer into a composite matrix phase composed of high surface area ceramic powder and aqueous electrolyte. Specifically examined in this study was micron-scale nickel powder treated in hydrogen peroxide (H2O2) loaded into high surface area alumina powder and aqueous boric acid solution. This new class of dielectric, composite electrolyte dielectrics (CED), is employed in an electrostatic capacitor configuration and demonstrated dielectric constant of order 10 [raised to the 10th power] at approximately 1 Volt. Additionally, it is demonstrated that treated nickel can be loaded in high volume fractions in the CED configuration. Prior studies of composite capacitors indicated a general limitation due to shorting. This results from the onset of percolation due to excess loading of conductive phases. Insulated particles described herein are successfully loaded up to 40% by volume, far above typical percolation thresholds. Simple models are presented to explain results. / Lieutenant, United States Navy