Spelling suggestions: "subject:" eie"" "subject:" iie""
31 |
Die Britse beleid teenoor en administrasie van die Swartes in Transvaal, 1877-1881Stals, Willem Adriaan January 1985 (has links)
Die tydperk in die Transvaalse geskiedenis wat met hierdie
werkstuk bestryk word, het al heelwat aandag van sowel tydgenootlike
skrywers as latere historici ontvang. Uit die
aard van die saak het die aandag in die eerste instansie op
die meer dramatiese geval - die Boere se stryd teen Britse
oorheersing en hulle pogings om hulle onafhanklikheid terug
te kry, wat ten einde laaste op die Eerste Vryheidsoorlog
van 1880-1881 uitgeloop het. 'n Verdere faset waaraan reeds aandag bestee is, is die wyse waarop die Engelse Transvaal in hierdie jare regeer het. Waarskynlik omdat dit as 'n aparte tema beskou is, het die
skrywer van hierdie werk egter geen aandag aan die Britte se
administrasie van die Swartes bestee nie. Die aspek van die Britse tydperk in Transvaal het tot dusver
weinig aandag ontvang. Weliswaar is sekere aspekte daarvan
reeds aangesny, maar met enkele uitsonderings was dit nog
nie die onderwerp van wetenskaplike ondersoek waarin die
tema in al sy fasette nagevors is nie. In sy The History
of Native Policy in South Africa from 1830 to the Present
Day (1927), gee E.H. Brookes as 'n onderdeel van 'n breer
onderwerp kortliks aandag aan die Britte se administrasie
van die Transvaalse Swartes. In sy werk Grensbakens
tussen Blank en Swart in Suid-Afrika (1947) raak ook P. van
BiIjon 'n aspek van hierdie tema aan, hoewel sy behandeling daarvan in meer as in een opsig bevraagteken moet word. Hierna het ook die skrywer hiervan 'n beskrywing gegee van die Tussenregering se beleid met betrekking tot die verkryging
van eiendomsreg op grand deur die Swartes. Origens
het die tema braak gele. / Thesis (DPhil)--University of Pretoria, 1985. / gm2013 / Historical and Heritage Studies / unrestricted
|
32 |
Estimation of Forging Die Wear and CostGroseclose, Adam R. 03 November 2010 (has links)
No description available.
|
33 |
Die geometry induced heterogeneous morphology of polypropylene inside the die during die-drawing processLyu, D., Sun, Y., Thompson, Glen P., Lu, Y., Caton-Rose, Philip D., Lai, Y., Coates, Philip D., Men, Y. 21 December 2018 (has links)
Yes / The morphology distribution of isotactic-polypropylene (iPP) shaped through a die during hot stretching process was investigated via wide-angle X-ray diffraction technique. The evolution of micro-structures in the outer layer (layer closer to the die wall) and the inner layer (layer in the center of die) of die-drawn iPP were both recorded. It turned out that the difference of morphology distribution between outer and inner layers changes with the distance from the die entrance to exit. In general, a larger difference between outer and inner layers could be found at the intermediate deformation region inside the die while such difference disappeared at both of the entrance and exit regions of die. These behaviors could be interpreted as a result of the existence of a heterogeneous distribution of force field inside the die, which was caused by the die geometry and inclination of the drawing force. This work showed that the heterogeneous force field inside the die could be revealed through analyzing the morphology of a die-drawn sample.
|
34 |
Rationalization of tool design in extrusionFarzad, A. January 1988 (has links)
No description available.
|
35 |
En genomtänkt vinterresa : En tolkning av pianostämman i två sånger ur Schuberts WinterreiseEricsson, David January 2019 (has links)
Jag vill som klassisk pianist bli bättre på att tolka sång- och pianomusik eftersom jag spelar mycket tillsammans med sångare i vardagslivet. Jag har valt två sånger ur sångcykeln Winterreise som jag har analyserat för att komma fram till en tolkning som jag kan argumentera för. Jag har analyserat sångerna med not- och harmonianalys och jag har skrivit framförallt om något oförväntat eller nytt händer i musiken. När jag kände att jag undersökt partituren noga så började jag hänvisa till texten. Med arbetet har jag besvarat mina tre frågeställningar: Hur påverkar en djupare förståelse av Die Krähe och Frühlingstraum arbetet med musikaliska uttryck i de två sångerna? Hur tolkar jag kopplingen mellan texten och pianostämman i olika avsnitt? Hur får jag pianostämman att uttrycka detta? Nu i efterhand så har jag en inblick hur jag ska gå tillväga när jag ska tolka sång- och pianorepertoar. Min tidigare kunskap inom musikteori var ganska begränsad och detta arbetet har hjälpt mig att utvecklas.
|
36 |
Prediction and Reduction of Die Soldering.Hogan, Patrick Alan 30 April 2008 (has links)
Die Soldering occurs in aluminum permanent mold casting when the cast metal bonds with the die surface and remains stuck upon ejection of the part. Eventually, this layer builds up and production must be stopped for cleaning. It was estimated in a Contech squeeze casting plant in Pierceton, IN, that 1.5% of variable overhead can be directly attributed to die soldering. Previous work at WPI has focused on developing the mechanism of how soldering occurs. This work focuses on how that knowledge can be applied in an industrial setting. The work has focused on 4 major areas: (1) Using MAGMAsoft to predict die soldering, (2) Using surface metrology to measure die soldering, (3) Documenting the total process effects of using strontium modified casting alloys. The work has resulted in: (1) Guidelines for using MAGMAsoft to predict die soldering. The results can be incorporated into the existing MAGMA die soldering module, but provide more accurate time and temperature criteria. (2) The results of the study prove that measurement of the surface of the cast part itself can be used as a method for quantifying die soldering. (3) The total process effects of Sr-modification are reported, along with suggestions for immediate use of Sr-modification at the Pierceton, IN casting plant and guidelines for using Strontium in the future.
|
37 |
Stress Study of Silicon Die for Filp-Chip Package Under Different Types of Stress LoadingCheng, Mao-Chuan 22 January 2007 (has links)
Over the past years, there are many studies discusses different modes of die cracking and improvement. Die cracking is one of the crucial issues that influence the reliability of flip chip assemblies. Die cracking depends on a combination of several factors, such as residual bending stresses generated in the package due to mismatches in the coefficients of thermal expansion(CTE) of the various materials in the assembly or wafer dicing process .
In this study, the stresses in the chip of a FCBGA (Flip-Chip Ball Grid Array) induced by the temperature raising and by the mechanical load of different pressures on an automatic test handler are investigated by using commercial finite element software ANSYS, while the FCBGA is subjected to the high temperature electrically test. The causes and precautions corresponding to the die cracking are studied in order to improve the reliability of products.
|
38 |
Les lieux et les temps de l'appartenanceSencebe, Yannick. Ganne, Bernard. January 2001 (has links)
Thèse de doctorat : Sociologie : Lyon 2 : 2001. / Titre provenant de l'écran-titre. Bibliogr.
|
39 |
Ultrasonic inspection of gas porosity defects in aluminium die castingsPalanisamy, Suresh. January 2006 (has links)
Thesis (PhD) - Swinburne University of Technology, Industrial Research Institute Swinburne - 2006. / A thesis submitted to the Industrial Research Institute Swinburne, Swinburne University of Technology in fulfilment of the requirements to the degree of Doctor of Philosophy, 2006. Typescript. Includes bibliographical references (p. 199-211).
|
40 |
Der Gesamttatbestand des Verbrechens gegen die Menschlichkeit Herleitungen, Ausprägungen, EntwicklungenKuschnik, Bernhard January 2008 (has links)
Zugl.: Tübingen, Univ., Diss., 2008
|
Page generated in 0.0241 seconds