Spelling suggestions: "subject:" bdynamic light scattering"" "subject:" _dynamic light scattering""
31 |
Understanding Surfactant Skin Irritation by Probing the Relationship between the Structure and the Function of MicellesAde-Browne, Chandra 04 September 2018 (has links)
No description available.
|
32 |
Pharmaceutically Relevant Microemulsions with Potential Topical, Ophthalmic, and Parenteral ApplicationsZachar, Carrie L. 14 June 2010 (has links)
No description available.
|
33 |
DEVELOPMENT OF PHASE DECORRELATION OPTICAL COHERENCE TOMOGRAPHY FOR ASSESSMENT OF THE OCULAR LENS AND CORNEABlackburn, Brecken June 07 September 2021 (has links)
No description available.
|
34 |
Aggregation mechanisms of proteins in liquid formulations / Aggregationsmekanismer av proteiner i vätskeformuleringarHamrin, Amanda January 2022 (has links)
Biologiska läkemedel har under det senaste århundradet utökats, och under de senaste 25 åren så har proportionen av godkända biologiska läkemedel har ökat för behandlingen av sjukdomar, vaccin, och diagnostik. Det finns flera olika mekanismer för protein aggregering, och en av dessa är seeding, vilket innebär aggregering inducerat av tillsatta aggregat eller förekomsten av strukturförändringar i proteinet. I detta examensarbete har två terapeutiska proteiner, Somatropin och en monoklonal antikropp, studerats i form av aggregering. Denna studie har utförts genom att värma en del av proteinlösningen för att bilda aggregat och strukturförändrat protein, och sedan blanda detta med nativt protein till olika volymprocent. Dessa lösningar förvarades i olika temperaturer, 4°C, RT och 40°C för att undersöka temperaturberoendet. Med Dynamic Light Scattering (DLS) mättes storleksfördelningen och medelstorleken på proteinet, vilket visade att de seedade proverna ökade i medelstorlek med tiden. Detta indikerar att seedingen inducerade aggregering med tiden. / Biological pharmaceuticals have expanded their use over the last decade, and during the recent 25 years, the proportion of approved biologics has increased for the treatment of diseases, vaccines, and diagnostics. There are several aggregation mechanisms, and one is seeding, i.e., aggregation induced by pre-formed aggregates or the presence of conformational changed proteins. In this master thesis, two therapeutic proteins, Somatropin and one monoclonal antibody have been studied in terms of aggregation. The study has been performed by heating a part of a protein solution to induce aggregation and mixing this with native protein in different volume percentages. These were stored in different temperatures, 4°C, RT, and 40°C, to investigate the temperature dependence. With Dynamic light scattering (DLS), the size distribution and the average-sized particles were measured. This showed that there was a growth of average size in the seeded samples with time. This indicates that the seeding induced aggregation with time.
|
35 |
Caracteriza??o do processo de gelifica??o de solu??es quitosana utilizando reometria e espalhamento din?mico da luzMorais, Wildson Arcanjo de 20 July 2011 (has links)
Made available in DSpace on 2014-12-17T15:41:55Z (GMT). No. of bitstreams: 1
WildsonAM_DISSERTPPGQ.pdf: 2126383 bytes, checksum: 6a1a9e8b2c55caac2fbd3fb938bff756 (MD5)
Previous issue date: 2011-07-20 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Gels consist of soft materials with vast use in several activities, such as in
pharmaceutical industry, food science, and coatings/textile applications. In order to obtain
these materials, the process of gelification, that can be physical (based on physical
interactions) and/or chemical (based on covalent crosslinking), has to be carried out. In this
work we used dynamic light scattering (DLS) and rheometry to monitor the covalent
gelification of chitosan solutions by glutaraldehyde. Intensity correlation function (ICF) data
was obtained from DLS and the exponential stretched Kohrausch-William-Watts function
(KWW) was fitted to them. The parameters of the KWW equation, β, Γ and C were evaluated.
These methods were effective in clarifying the process of sol-gel transition, with the
emergence of non-ergodicity, and determining the range of gelation observed in about 10-20
minutes. The dependence between apparent viscosity on reaction time was used to support the
discussion proposed. / G?is s?o materiais que possuem aplica??es em v?rias ?reas, tais quais, na ind?stria de
tintas, alimentos e farmac?utica. Os m?todos empregados para obten??o dos g?is podem ser
f?sicos (intera??es f?sicas) e/ou qu?micos (baseado em intera??es covalentes), tal processo, ?
denominado gelifica??o. Neste trabalho, o processo de gelifica??o de quitosana/glutaralde?do
foi monitorado utilizando reometria e espalhamento da luz (DLS). As fun??es de correla??o
de intensidade (ICF) foram obtidas atrav?s de DLS e a equa??o de Kohrausch-William-Watts
(KWW) foi ajustada com os dados experimentais. Os par?metros da equa??o KWW, β, Γ e C
foram avaliados. Estes m?todos foram eficazes na clarifica??o do processo que compreende a
transi??o sol-gel, com o surgimento da n?o-ergodicidade, e na determina??o da faixa de
gelifica??o, observada em torno de 10-20 minutos. A depend?ncia da viscosidade aparente em
fun??o do tempo foi utilizada para comprovar o tempo de gelifica??o observado no DLS.
|
36 |
A Membrane Separation Process for Biodiesel PurificationSaleh, Jehad 02 February 2011 (has links)
In the production of biodiesel via the transesterification of vegetable oils, purification to international standards is challenging. A key measure of biodiesel quality is the level of free glycerol in the biodiesel. In order to remove glycerol from fatty acid methyl ester (FAME or biodiesel), a membrane separation setup was tested. The main objective of this thesis was to develop a membrane process for the separation of free glycerol dispersed in FAME after completion of the transesterification reaction and to investigate the effect of different factors on glycerol removal. These factors included membrane pore size, pressure, temperature, and methanol, soap and water content.
First, a study of the effect of different materials present in the transesterification reaction, such as water, soap, and methanol, on the final free glycerol separation was performed using a modified polyacrylonitrile (PAN) membrane, with 100 kD (ultrafiltration) molecular weight cut off for all runs at 25°C. Results showed low concentrations of water had a considerable effect in removing glycerol from the FAME. The mechanism of separation of free glycerol from FAME was due to the removal of an ultrafine dispersed glycerol-rich phase present in the untreated (or raw) FAME. The size of the droplets and the free glycerol separation both increased with increasing water content of the FAME.
Next, three types of polymeric membranes in the ultrafiltration range with different molecular weight cut off, were tested at three fixed operating pressures and three operating temperatures (0, 5 and 25oC) to remove the free glycerol from a biodiesel reactor effluent. The ASTM standard for free glycerol concentration was met for the experiments performed at 25°C. The results of this study indicate that glycerol could be separated from raw FAME to meet ASTM and EN standards at methanol feed concentrations of up to 3 mass%. The process was demonstrated to rely on the formation of a dynamic polar layer on the membrane surface.
Ceramic membranes of different pore sizes (0.05 µm (ultrafiltration (UF) range) and 0.2 µm (microfiltration (MF) range)) were used to treat raw FAME directly using the membrane separation set up at temperatures of 0, 5 and 25°C. The results were encouraging for the 0.05 µm pore size membrane at the highest temperature (25°C). The effect of temperature on glycerol removal was evident from its relation with the concentration factor (CF). Higher temperatures promoted the achievement of the appropriate CF value sooner for faster separation. Membrane pore size was also found to affect separation performance.
A subsequent study revealed the effect of different variables on the size of the glycerol droplets using dynamic light scattering (DLS). A key parameter in the use of membrane separation technology is the size of the glycerol droplets and the influence of other components such as water, methanol and soaps on that droplet size. The effect of water, methanol, soap and glycerol on the size of suspended glycerol droplets in FAME was studied using a 3-level Box-Behnken experimental design technique. Standard statistical analysis techniques revealed the significant effect of water and glycerol on increasing droplet size while methanol and soap served to reduce the droplet size.
Finally, a study on the effect of trans-membrane pressure (TMP) at different water concentrations in the FAME phase on glycerol removal using UF (0.03 µm pore size, polyethersulfone (PES)) and MF (0.1 and 0.22 µm pore sizes, PES) membranes at 25, 40 and 60°C was performed. Results showed that running at 25°C for the two membrane types produced the best results for glycerol removal and exceeded the ASTM and EN standards. An enhancement of glycerol removal was found by adding small amounts of water up to the maximum solubility limit in biodiesel. An increase in temperature resulted in an increase in the solubility of water in the FAME and less effective glycerol removal. Application of cake filtration theory and a gel layer model showed that the gel layer on the membrane surface is not compressible and the specific cake resistance and gel layer concentration decrease with increasing temperature. An approximate value for the limiting (steady-state) flux was reported and it was found that the highest fluxes were obtained at the lowest initial water concentrations at fixed temperatures.
In conclusion, dispersed glycerol can be successfully removed from raw FAME (untreated FAME) using a membrane separation system to meet the ASTM biodiesel fuel standards. The addition of water close to the solubility limit to the FAME mixture enables the formation of larger glycerol droplets and makes the separation of these droplets straightforward.
|
37 |
A Membrane Separation Process for Biodiesel PurificationSaleh, Jehad 02 February 2011 (has links)
In the production of biodiesel via the transesterification of vegetable oils, purification to international standards is challenging. A key measure of biodiesel quality is the level of free glycerol in the biodiesel. In order to remove glycerol from fatty acid methyl ester (FAME or biodiesel), a membrane separation setup was tested. The main objective of this thesis was to develop a membrane process for the separation of free glycerol dispersed in FAME after completion of the transesterification reaction and to investigate the effect of different factors on glycerol removal. These factors included membrane pore size, pressure, temperature, and methanol, soap and water content.
First, a study of the effect of different materials present in the transesterification reaction, such as water, soap, and methanol, on the final free glycerol separation was performed using a modified polyacrylonitrile (PAN) membrane, with 100 kD (ultrafiltration) molecular weight cut off for all runs at 25°C. Results showed low concentrations of water had a considerable effect in removing glycerol from the FAME. The mechanism of separation of free glycerol from FAME was due to the removal of an ultrafine dispersed glycerol-rich phase present in the untreated (or raw) FAME. The size of the droplets and the free glycerol separation both increased with increasing water content of the FAME.
Next, three types of polymeric membranes in the ultrafiltration range with different molecular weight cut off, were tested at three fixed operating pressures and three operating temperatures (0, 5 and 25oC) to remove the free glycerol from a biodiesel reactor effluent. The ASTM standard for free glycerol concentration was met for the experiments performed at 25°C. The results of this study indicate that glycerol could be separated from raw FAME to meet ASTM and EN standards at methanol feed concentrations of up to 3 mass%. The process was demonstrated to rely on the formation of a dynamic polar layer on the membrane surface.
Ceramic membranes of different pore sizes (0.05 µm (ultrafiltration (UF) range) and 0.2 µm (microfiltration (MF) range)) were used to treat raw FAME directly using the membrane separation set up at temperatures of 0, 5 and 25°C. The results were encouraging for the 0.05 µm pore size membrane at the highest temperature (25°C). The effect of temperature on glycerol removal was evident from its relation with the concentration factor (CF). Higher temperatures promoted the achievement of the appropriate CF value sooner for faster separation. Membrane pore size was also found to affect separation performance.
A subsequent study revealed the effect of different variables on the size of the glycerol droplets using dynamic light scattering (DLS). A key parameter in the use of membrane separation technology is the size of the glycerol droplets and the influence of other components such as water, methanol and soaps on that droplet size. The effect of water, methanol, soap and glycerol on the size of suspended glycerol droplets in FAME was studied using a 3-level Box-Behnken experimental design technique. Standard statistical analysis techniques revealed the significant effect of water and glycerol on increasing droplet size while methanol and soap served to reduce the droplet size.
Finally, a study on the effect of trans-membrane pressure (TMP) at different water concentrations in the FAME phase on glycerol removal using UF (0.03 µm pore size, polyethersulfone (PES)) and MF (0.1 and 0.22 µm pore sizes, PES) membranes at 25, 40 and 60°C was performed. Results showed that running at 25°C for the two membrane types produced the best results for glycerol removal and exceeded the ASTM and EN standards. An enhancement of glycerol removal was found by adding small amounts of water up to the maximum solubility limit in biodiesel. An increase in temperature resulted in an increase in the solubility of water in the FAME and less effective glycerol removal. Application of cake filtration theory and a gel layer model showed that the gel layer on the membrane surface is not compressible and the specific cake resistance and gel layer concentration decrease with increasing temperature. An approximate value for the limiting (steady-state) flux was reported and it was found that the highest fluxes were obtained at the lowest initial water concentrations at fixed temperatures.
In conclusion, dispersed glycerol can be successfully removed from raw FAME (untreated FAME) using a membrane separation system to meet the ASTM biodiesel fuel standards. The addition of water close to the solubility limit to the FAME mixture enables the formation of larger glycerol droplets and makes the separation of these droplets straightforward.
|
38 |
Ion-specific and water-mediated effects on protein physical stabilityRubin, Jonathan 20 March 2013 (has links)
Protein aggregation and physical stability are perpetual concerns in medicine and industry. Misfolded protein can form ordered protein aggregates, amyloids, which are associated with a host of neurodegenerative diseases in mammals and control heritable traits in fungi and yeast. Industrially, amorphous aggregates reduce the efficacy of protein-based therapeutics and activity of enzymes during production and storage. This work studies ion-specific and solvent-based effects on protein physical stability. We show that ion-specificity significantly affects amyloid formation kinetics, aggregate morphology, thermostability, frangibility, and, most intriguingly, prion infectivity in vivo. Forming amyloid in chaotropic or kosmotropic solutions generates predominately weak or strong prion variants, respectively. Ion-specific effects also influenced amorphous aggregation of model proteins and antibodies. To quantify protein - protein stability/affinity, we developed a rapid and reliable diffusion-based technique. Our technique was able to resolve relative differences in colloidal stability between various saline and saccharide solutions. In all, this dissertation expands our understanding of ion-specific and water-mediated interactions with prion proteins and protein dispersions.
|
39 |
Biochemistry in BacterioferritinSuttisansanee, Uthaiwan January 2006 (has links)
Bacterioferritin, an iron storage protein having a 24-subunit quaternary structure, was used as a model for the study of host-guest interactions and guest encapsulation, making use of its spherical cage-like structure. A hexahistidine-affinity tag fused to the C-terminus of each bacterioferritin subunit was constructed. The C-terminus of each subunit points toward the inside of the cavity, while the N-terminus is exposed on the surface of the protein. The hexaHistag was able to form strong interactions with a nickel-nitrilotriacetic acid linked dye molecule (guest) and this interaction was used in attempts to develop a principle to control guest molecule encapsulation within the spherical cavity of the 24-mer bacterioferritin protein molecule. The procedure involved (1) subunit dissociation under acidic pH, (2) affinity controlled dye-Histag binding with exposed C-terminal hexahistidine residues and (3) reassociation of the subunits at neutral pH. The encapsulation conditions involving step 1 and 3 were studied preliminarily using laser light scattering to measure size (hydrodynamic radius) of the protein particle with apoferritin as a model system as it resembles the size and structure of bacterioferritin. In order to encapsulate guest molecules, the emptied shell of bacterioferritin was generated by site-directed mutagenesis resulting in ferroxidase- as well as heme-free bacterioferritin mutants (E18A/M52L/E94A), and these mutants were used to examine protein stability before conducting encapsulation experiments. However, wild-type bacterioferritin possessed highest stability in maintaining its multisubunit structure; hence, it was used for the encapsulation studies. It was found that 100% bacterioferritin with hexahistidine tag at the C-terminus, and a combination of 60% bacterioferritin with hexahistidine tag at the C-terminus and 40% bacterioferritin without hexahistidine tag at the C-terminus yielded similar amounts of encapsulated guest molecules. This suggested that all hexahistidine at the C-terminus were not equally available for dye molecule binding.
|
40 |
Biochemistry in BacterioferritinSuttisansanee, Uthaiwan January 2006 (has links)
Bacterioferritin, an iron storage protein having a 24-subunit quaternary structure, was used as a model for the study of host-guest interactions and guest encapsulation, making use of its spherical cage-like structure. A hexahistidine-affinity tag fused to the C-terminus of each bacterioferritin subunit was constructed. The C-terminus of each subunit points toward the inside of the cavity, while the N-terminus is exposed on the surface of the protein. The hexaHistag was able to form strong interactions with a nickel-nitrilotriacetic acid linked dye molecule (guest) and this interaction was used in attempts to develop a principle to control guest molecule encapsulation within the spherical cavity of the 24-mer bacterioferritin protein molecule. The procedure involved (1) subunit dissociation under acidic pH, (2) affinity controlled dye-Histag binding with exposed C-terminal hexahistidine residues and (3) reassociation of the subunits at neutral pH. The encapsulation conditions involving step 1 and 3 were studied preliminarily using laser light scattering to measure size (hydrodynamic radius) of the protein particle with apoferritin as a model system as it resembles the size and structure of bacterioferritin. In order to encapsulate guest molecules, the emptied shell of bacterioferritin was generated by site-directed mutagenesis resulting in ferroxidase- as well as heme-free bacterioferritin mutants (E18A/M52L/E94A), and these mutants were used to examine protein stability before conducting encapsulation experiments. However, wild-type bacterioferritin possessed highest stability in maintaining its multisubunit structure; hence, it was used for the encapsulation studies. It was found that 100% bacterioferritin with hexahistidine tag at the C-terminus, and a combination of 60% bacterioferritin with hexahistidine tag at the C-terminus and 40% bacterioferritin without hexahistidine tag at the C-terminus yielded similar amounts of encapsulated guest molecules. This suggested that all hexahistidine at the C-terminus were not equally available for dye molecule binding.
|
Page generated in 0.1359 seconds