M.Tech. (Department of Chemistry, Faculty of Applied and Computer Sciences), Vaal University of Technology. / Phenol, 2-chlorophenol (2-CP) is used in the manufacture of several chemical compounds including other chlorophenols, dyes, dentifrice and pesticides. The usage of these chemicals results in the discharge of 2-CP that is harmful to most biota in the environment. Therefore there is need to remove or degrade 2-CP from the environment, especially in water. This research focused on the synthesis, characterization and application of Ag doped semiconductor (TiO2, ZnO, and ZnS) nanoparticles for the removal of 2-CP from water. Sol-gel and co-precipitation methods were used to synthesize the nanoparticles with different Ag contents (1%, 3% and 5%). Silver metal was used as a doping agent due to its antibacterial activity and ability to improve the photocatalytic activity of the semiconductors for 2-CPdegradation under UV irradiation. Characterization techniques such as X-ray diffraction (XRD), Fourier transform infrared (FTIR), Ultra-violet visible spectroscopy (UV-Vis) and photoluminescence spectra (PL) were used to characterize the structural, optical and physical properties of the nanoparticles, while Transmission electron microscopy (TEM) was used to characterize the surface of the nanoparticles. The XRD results confirmed the formation of anatase, wurtzite and blend phases of TiO2, ZnO and ZnS nanoparticles, respectively. The band gaps of the synthesized nanoparticles were 3.42 eV, 3.23 eV and 3.12 eV for TiO2, ZnO and ZnS nanoparticles respectively. The TEM images showed that all synthesized nanoparticles were uniform in shape. Photocatalytic degradation of 2-CP under UV irradiation confirmed that the semiconductor’s photocatalytic activities improved with the addition of Ag ions. The best removal percentage was obtained at doped Ag percentages of 5, 1 and 5 % using TiO2, ZnO and ZnS, respectively. In addition, the effects of various parameters affecting the photocatalytic degradation such as pH, initial concentrations of 2-CP and amount of catalyst (Ag doped TiO2, ZnO and ZnS, respectively) loading were examined and optimized. At the different initial concentrations of 2-CP, namely, 8, 20 and 50 ppm, the highest degradation efficiency was obtained at pH of 10.5 and 5 mg of catalyst dosage. However a decrease in initial concentration of 2-CP showed an increase in the photocatalytic efficiency. The degradation percentage of 2-CP obtained with Ag doped TiO2; ZnO and ZnS nanoparticles were 74.74, 57.8 and 45.49 %, respectively. Doping of these materials with Ag enhanced their photocatalytic activity; thus, they have the potential of degrading phenolic compounds, especially 2-chlorophenol, in water.

The purpose of this research was to investigate the kinetics and mechanisms of the photocatalytic degradation of organic substances in the presence of anions (bromide and chloride), using titanium dioxide as a photocatalyst. Tris(hydroxymethyl)aminomethane (Tris) and methanol were the organic substances used as probes. Photocatalytic degradation of the probes produces formaldehyde through reaction with hydroxyl radicals at the surface of the photocatalyst. The product was quantified using a modified Hantzsch reaction and UV-Vis spectroscopy at the fixed wavelength 368 nm. It was found that having bromide present in the reaction mixture resulted in an increase in the rate of formation of formaldehyde from Tris, while it resulted in a decrease from methanol. Bromide on the surface of the photocatalyst reacts with the hydroxyl radicals to form reactive halogen species (RHS). This study proposes that the RHS Br2•- oxidises the probe into a cation radical, which initialises the probe degradation and the subsequent formation of formaldehyde. Conversion from hydroxyl radicals to RHS leads to a greater selectivity in formaldehyde production. Increased selectivity of attack towards electron-rich centres can explain the observed results with the different probes in this study. A linear combination expression of the total production of formaldehyde was developed, through which the X-factor, a ratio of the production of formaldehyde by RHS relative to the production of formaldehyde by hydroxyl radicals, was calculated. However, no realistic values were obtained when calculating the X-factor for different anion concentrations, thus indicating that factors other than competition kinetics affect the degradation. No conclusions could be drawn regarding the effect of chloride on the formation of formaldehyde from Tris and methanol, as the results were ambiguous. / Syftet med denna studie var att undersöka mekanismer och kinetik bakom fotokatalytisk nedbrytning av organiska molekyler i närvaro av anjoner (bromid och klorid), där titandioxid användes som fotokatalysator. Tris(hydroxymetyl)aminometan (Tris) och metanol var de organiska substanserna som studerades. Den fotokatalytiska nedbrytningen av proberna resulterar i formaldehyd via reaktion med hydroxylradikaler på fotokatalysatorns yta. Produkten kan sedan kvantifieras genom en modifierad version av Hantzsch-reaktionen följt av UV-Vis spektroskopi vid en fixerad våglängd på 368 nm. Studien kom fram till att närvaron av bromid i reaktionslösningen resulterade i en ökad produktionshastighet av formaldehyd från Tris, medan det resulterade i en minskning från metanol. Bromid på ytan av fotokatalysatorn reagerar med hydroxylradikaler och bildar reaktiva halogena molekyler (RHS). Denna studie föreslår att RHS:en Br2•- oxiderar proben till en radikalkatjon, som initierar nedbrytningen av proben och efterföljande bildning av formaldehyd. Omvandling från hydroxylradikaler till RHS leder till högre selektivitet av bildning av formaldehyd. Ökad selektivitet av attacker mot elektronrika center kan förklara de observerade resultaten med de olika proberna i denna studie. Ett linjärkombinationsuttryck av den totala produktionen av formaldehyd utvecklades, från vilket X-faktorn, ett förhållande av produktionen av formaldehyd via RHS relativt till produktionen av formaldehyd via hydroxylradikaler, kunde beräknas. Inga realistiska värden erhölls dock vid beräkningen av X-faktorn för olika anjonskoncentrationer, vilket indikerar att andra faktorer än konkurrenskinetik påverkar nedbrytningen. Inga slutsatser kunde dras gällande klorids effekt på bildningen av formaldehyd från Tris och metanol, då resultaten var tvetydiga.

The photocatalytic degradation of the wastewater dye pollutant methylene blue (MB) at ZnO nanostructured porous thin films, deposited by direct current reactive magnetron sputtering on Si substrates, was studied. It was observed that over 4 photocatalytic cycles (0.3 mg · l−1 MB solution, 540 minUV irradiation), the rate constant k of MB degradation decreased by ∼50%, varying in the range (1.54 ÷ 0.78) · 10–9 (mol·l−1·min−1). For a deeper analysis of the photodegradation mechanism, detailed information on the nanostructured ZnO surface morphology and local surface and subsurface chemistry (nonstoichiometry) were obtained by using scanning electron microscopy (SEM) and x-ray photoelectron spectroscopy (XPS) as complementary analytical methods. The SEM studies revealed that at the surface of the nanostructured ZnO thin films a coral reef structure containing polycrystalline coral dendrites is present, and that, after the photocatalytic experiments, the sizes of individual crystallites increased, varying in the range 43 ÷ 76 nm for the longer axis, and in the range 28 ÷ 58 nm for the shorter axis. In turn, the XPS studies showed a slight non-stoichiometry, mainly defined by the relative [O]/[Zn] concentration of ca. 1.4, whereas [C]/[Zn] was ca. 1.2, both before and after the photocatalytic experiments. This phenomenon was directly related to the presence of superficial ZnO lattice oxygen atoms that can participate in the oxidation of the adsorbed MB molecules, as well as to the presence of surface hydroxyl groups acting as hole-acceptors to produce OH· radicals, which can be responsible for the generation of superoxide ions. In addition, after experiments, the XPS measurements revealed the presence of carboxyl and carbonyl functional groups, ascribable to the oxidation by-products formed during the photodegradation of MB.

Les procédés de photodégradation, de conversion photocatalytique du CO2 et la technologie des supercondensateurs représentent des options intéressantes pour palier aux problèmes environnementaux et pour apporter des réponses à la crise énergétique. Dans ces trois domaines, les matériaux à base d'oxydes métalliques sont très prometteurs. Cependant, les voies classiques (c'est-à-dire par voies hydrothermales ou de sol-gels) présentent un certain nombre d’inconvénients tels que leur longues durées de préparation et leurs rendements limités. En outre, la mise en oeuvre de nanopoudres suppose une opération de post-filtration dans les procédés de photodégradation et l’utilisation supplémentaire d’un liant dans la confection d’électrodes de supercondensateurs, ce qui non seulement réduit les performances respectives de ces deux procédés mais entrave également leur développement au niveau industriel. Dans cette thèse, les technologies SPPS (Solution Precursor Plasma Spray) et SPFS (Solution Precursor Flame Spray) ont été introduites pour préparer des films d'oxydes métalliques à base de ZnO, en bénéficiant des avantages de rapidité et simplicité de ces techniques de formation de dépôts. Les films ainsi obtenues ont ensuite été testés dans des expériences de photodégradation, de conversion photocatalytique du CO2 et sous forme de supercondensateurs. Tout d'abord, à notre connaissance, c'est la première fois que l'on synthétise directement des nanostructures de ZnO (par exemple des nanotubes ou des nanofils) par des procédés SPPS. Ces films nanostructurés et hiérarchisés présentent non seulement une croissance préférentielle le long du plan cristallin (002), mais contiennent aussi des lacunes d'oxygène dans leurs réseaux. La mise en œuvre de simulations DFT a permis de proposer un mécanisme possible de croissance des nanostructures de ZnO lors de leur synthèse par la voie SPPS. Deuxièmement, divers films “composites”, constitués de ZnO et d’un second oxide “MO” ont également été préparés par SPPS afin de réduire les bandes d'énergie interdites. Dans cette partie de la thèse, nous avons étudié l’effet du rapport molaire MO/ZnO sur la structure des films MO/ZnO obtenus (M = Mn et Cu); nous avons aussi préparé, par cette nouvelle méthode, des films fins CuO/ZnO et CeO2/ZnO ainsi que des films de ZnO “décorés”. Troisièmement, des films mettant en œuvre des structures du type spinelle (tels que les oxydes mixtes ZnFe2O4, NiCo2O4, ZnCo2O4 et Co3O4) ont également été synthétisés et déposés à l’aide des techniques SPPS et SPFS, ceci en raison de leur grand intérêt pour les applications susmentionnées. Il a été constaté que les structures obtenues sont très sensibles aux rapports MO/ZnO et que les morphologies de surface dépendent davantage des paramètres d'injection des solutions. En outre, la puissance de la torche joue un rôle plus critique dans la synthèse in situ de la phase spinelle binaire que la température de préchauffage du substrat. Enfin, la voie de préparation par SPPS favorise la formation de dépôts de textures floconneuses, notamment dans le cas des films de NiCo2O4 et Co3O4, tandis que des particules de formes sphériques ont été plutôt observées dans les échantillons préparés par la voie SPFS... / The fields of research dealing with photodegradation, photocatalytic conversion of CO2 and supercapacitors are important to address environmental problems and respond to the energy crisis. Metal oxides are promising materials in these three domains. However, the conventional routes (i.e. hydrothermal, sol-gel) suffer from major deficiencies, namely their multi-step natures, their long preparation duration and small-scaled yields. Moreover, the usage of nanopowders implies a post-filtration operation at the end of the photodegradation processes and requires an additional binder in supercapacitor electrodes. In this thesis, “Solution Precursor Plasma Spray” (SPPS) and “Solution Precursor Flame Spray” (SPFS) technologies have been introduced to develop metal oxide films in view of the three aforementioned applications, benefiting from the facility and rapidity advantages of this one-step process.Firstly, to our best knowledge, it is the first time that films composed by ZnO nanostructures (e.g. nanorods, nanowires) are directly synthesized via a SPPS process. These hierarchical ZnO nanostructured films not only exhibit preferential orientation growth along the (002) crystal plane, but also feature in-situ oxygen vacancies. As a result, a possible growth mechanism of ZnO nanostructures via SPPS route was proposed.Secondly, various metal oxides composite films containing ZnO and a second metal oxide were also prepared by SPPS in an effort to narrow the energy bandgaps. In this work, not only the effect of the molar CuO/ZnO and MnO/ZnO ratio was investigated, but also laminated CuO/ZnO and CeO2/ZnO films and CuO, Co3O4 and Fe2O3 decorated ZnO nanorods films were pioneeringly deposited via this novel route.Thirdly, films involving spinel-type materials (including ZnFe2O4, NiCo2O4, ZnCo2O4 and Co3O4) were also synthesized and deposited by the SPPS and SPFS technologies, owing to their high-interest in the aforementioned applications. We found that the phase compositions are more sensitive to the Fe/Zn and Ni/Co ratios and that the surface morphologies are more dependent on the patterns of the solution injection. In addition, the power of the torch plays a more critical role on the in-situ synthesis of binary spinel phase. Besides, the SPPS route promotes the formation of flake-like particles both in the NiCo2O4 and Co3O4 films, while sphere-like particles were observed in the SPFS-prepared samples.Finally, some as-prepared films were selected to evaluate their performances within the three applications. On the one hand, Orange II was successfully (100%) degraded within 2h under UV irradiation and about 85% was removed within 6h under visible light irradiation. On the other hand, Co3O4 samples exhibited specific capacitances up to 1190 F g−1 with a retention capacity of 136% after 2500 cycles at a 20 mV/s scanning rate in 2 M KOH electrolyte. Finally, when using ZnCo2O4 as photocatalyst, CO2 was converted into CO by visible light irradiation with a maximum turnover number as high as 61.38 and a selectivity as high as 90.5 %.Overall, this work not only improves the performances of the three studied processes thanks to the use of novel, fast preparation methods, but also suggests that “Solution Precursor Thermal Spray” should be a highly promising technology for further, alternative functional applications that involve finely structured metal oxides film.

<p>Ispitana je direktna i indirektna razgradnja odabranih&nbsp; &beta;-blokatora (metoprolol- tartarata, MET i propranolol-hidrohlorida, PRO) kao i diuretika (hidrohlortiazida, HCTZ) i njegovog stabilnog intermedijera hidrolize 4-amino-6-hlor-1,3-benzendisulfonamida (ABSA). Praćena je i kinetika razgradnje direktnom i indirektnom fotolizom uz primenu UVA, UVC, sunčevog i simuliranog sunčevog zračenja (SSZ). Najpre je ispitana&nbsp; stabilnost MET pod dejstvom SSZ, UVA, UVC, UVA/H₂O_{2 ,} i UVA/&nbsp; BrO₃^-. Dalje je ispitana efikasnost razgradnje MET pod dejstvom O₃i UVC/O_3. Identifikovano je deset intermedijera tokom UVC, O_3&nbsp;i UVC/O₃ razgradnje, pri&nbsp; čemu samo jedan ima značajno vi&scaron;u toksičnost prema algama i bakterijama u odnosu na ostale. Efikasnost fotokatalitičke razgradnje MET je ispitana u TiO₂ suspenzijama sa komercijalnim katalizatorima (Wackherr i Degussa P25). Mehanizam fotokatalitičke razgradnje je detaljno ispitan, pri&nbsp; čemu je identifikovano&nbsp; četrnaest intermedijera. EC₅₀ vrednost MET i njegovih sme&scaron;a nastalih pri fotokatalitičkoj razgradnji su određene na tri ćelijske linije sisara (H-4-II-E, HT-29 i MRC-5). Kako bi se povećala efikasnost&nbsp; rocesa fotokatalitičke razgradnje primenom komercijalnih katalizatora, ispitan je&nbsp; uticaj prisustva elektron-akceptora u suspenziji, pri čemu je upoređen uticaj O₂/H₂O₂, i O₂/ BrO₃^-&nbsp;na mehanizam razgradnje. Na osnovu teorije funkcionala gustine stekao se uvid u promene unutar molekula MET u prisustvu reaktivnih radikala. Takođe, ispitana je efikasnost nedopiranih TiO₂ , kao i dopiranih La(III) nanoprahova sintetisanih sol&minus;gel postupkom, u razgradnji MET. Uticaj temperature &nbsp;kalcinacije na fotokatalitičku efikasnost TiO 2 nanoprahova dopiranih pomoću La(III) &nbsp;ispitana je na supstratima MET i PRO, pri čemu je analiziran i uticaj strukture&nbsp; polaznog jedinjenja na&nbsp; informacija efikasnost fotokatalitičke razgradnje. Rezultati su upoređeni sa nedopiranim TiO₂nanoprahom i TiO₂Degussa P25 (pri pH-vrednosti 9). Pored toga, ispitana je kinetika i toksičnost PRO i njegovih intermedijera nastalih tokom razgradnje sa TiO₂Degussa P25. Ispitan je i uticaj strukture polaznog jedinjenja (MET, HCTZ i ABSA) na fotorazgradnju pod dejstvom&nbsp;UVA, sunčevog i simuliranog sunčevog zračenja, u odsustvu/prisustvu TiO₂ Degussa P25. Takođe, ispitan je i sinergistički efekat MET i ABSA na proces hidrolize, direktne fotolize i fotokatalize sa SSZ/TiO₂Degussa P25. Kako bi se stekao uvid u toksičnost proučavanih sistema, ispitan je njihov uticaj na rast odabranih ćelijskih linija sisara.</p> / <p>Direct and indirect degradation of selected&nbsp; &beta;-blockers (metoprolol tartrate, MET and&nbsp;propranolol hydrochloride, PRO) and also diuretic (hydrochlorothiazide, HCTZ) in &nbsp;addition to its stable hydrolysis intermediate 4-amino-6-chloro-&nbsp;&nbsp; 1,3-benzenedisulfonamide (ABSA) were investigated. The kinetics of their degradation obtained by direct and indirect photolysis under UVA, UVC, sunlight and simulated sunlight irradiation (SSI) have been followed. Firstly, the stability of MET under influence of SSI, UVA, UVC, UVA/H₂O₂ , and UVA/&nbsp; BrO₃^- has been investigated. Further, the efficiency of MET degradation under influence of O₃, and UVC/O₃ has been explored. Ten intermediates have been identified during the UVC, O₃, and UVC/O₃ treatments, while only one intermediate had significantly higher toxicity towards the algae and bacteria in respect to the others. Efficiency of&nbsp; photocatalytic degradation of MET was investigated in TiO₂ suspensions with&nbsp;commercial catalysts (Wackherr and Degussa P25). Mechanism of photocatalytic degradation was investigated in detail according to which fourteen intermediates were identified. EC 50 &nbsp;value of MET and its mixtures formed during the photocatalytic degradation has been determined at three mammalian cell lines (H-4-II-E, HT-29, and MRC-5). In order to improve the efficiency of photocatalytic degradation process applying commercial catalysts, the influence of presence of electron acceptors in suspension has been investigated and the influence of O₂/H₂O_2&nbsp;and O₂/BrO₃^- to the mechanism of degradation has been compared. Based on the density&nbsp; functional theory an insight to the changes within MET molecule in the presence of reactive radicals has been made. Also, the efficiency of bare TiO₂, as well as&nbsp;doped La(III) nanopowders synthesized by sol-gel procedure, in the degradation of&nbsp; MET has been investigated. The influence of calcination temperature on&nbsp; hotocatalytic efficiency of TiO_2&nbsp;nanopowders doped with La(III) has been studied on the MET and&nbsp; PRO substrates, and the influence of structure of the starting compound on the&nbsp; efficiency of &nbsp;photocatalytic degradation had been analyzed. Results have been&nbsp; compared with bare TiO_2&nbsp;nanopowder and TiO₂ Degussa P25 (at pH value of 9). Besides, kinetics and toxicity of PRO and its intermediates formed during the degradation with TiO₂ Degussa P25 have been investigated. The influences of starting compound&rsquo;s structure (MET, HCTZ, and ABSA) to photodegradation under UVA, sunlight and SSI, in the absence/presence of TiO₂ Degussa P25, have been investigated. Also, the synergistic effects of MET and ABSA to the process of&nbsp; hydrolysis, direct photolysis, and photocatalysis with SSI/TiO₂ Degussa P25 have been investigated. In order to get &nbsp;an insight into the toxicity of the studied systems, their influence on the growth of selected mammalian cell lines has been investigated as well.</p>

<p>Ispitana je kinetika i mehanizam fotokatalitičke&nbsp;razgradnje herbicida kvinmeraka i klomazona u prisustvu&nbsp;UV/TiO₂&nbsp; Degussa P25, odnosno piklorama i&nbsp; klopiralida&nbsp;<br />primenom UV/TiO₂&nbsp; Wackherr pri različitim&nbsp;eksperimentalnim uslovima. Praćena je i kinetika&nbsp;razgradnje odabranih herbicida direktnom fotolizom uz&nbsp;primenu sunčevog, UV i vidljivog zračenja, kao i u&nbsp;odsustvu svetlosti. Pored toga, upoređena je efikasnost&nbsp;<br />UV/TiO₂&nbsp; Degussa P25, odnosno UV/TiO₂&nbsp; Wackherr sa&nbsp;vidljivim zračenjem, kao i direktnom fotolizom u&nbsp;prisustvu pomenutih izvora svetlosti.&nbsp; U cilju procene&nbsp;<br />citotoksičnosti klomazona i klopiralida, kao i sme&scaron;e&nbsp;klomazona i klopiralida i njihovih intermedijera nastalih&nbsp;tokom fotokatalitičke razgradnje ispitan je&nbsp; in vitro&nbsp; rast&nbsp;<br />ćelijskih linija&nbsp; MRC-5 i H-4-II-E.&nbsp; Nakon ispitivanja&nbsp;fotokatalitičke razgradnje odabranih herbicida u dvaput&nbsp;destilovanoj vodi, praćena je njihova razgradnja i u&nbsp;prirodnim vodama. Takođe, ispitan je uticaj dodatka&nbsp;hidrogenkarbonata i huminske kiseline na efikasnost&nbsp;razgradnje odabranih herbicida. Fotokatalitička razgradnja&nbsp;klomazona, piklorama i mekopropa je ispitivana i u&nbsp;prisustvu UV/TiO₂&nbsp; nanocevi. Aktivnost katalizatora TiO_2&nbsp;Wackherr&nbsp; i TiO₂&nbsp; nanocevi je upoređena sa TiO₂&nbsp; Degussa&nbsp;P25.</p> / <p>The kinetics and mechanism of photocatalytic degradation&nbsp;of the herbicides quinmerac and clomazone in the&nbsp;presence of UV/TiO₂&nbsp; Degussa P25, and of picloram and&nbsp;clopyralid using UV/TiO₂&nbsp; Wackherr under different&nbsp;experimental conditions were studied. The kinetics of&nbsp;degradation of selected herbicides by direct photolysis&nbsp;using sunlight, UV and visible radiation, and in the&nbsp;absence of light were followed. In addition, the&nbsp;efficiencies of UV/TiO₂&nbsp; Degussa P25 and UV/TiO_2&nbsp;Wackherr &nbsp;were compared with visible radiation and direct&nbsp;photolysis in the presence of the above mentioned light&nbsp;sources. In order to evaluate the cytotoxicity of clomazone&nbsp;<br />and clopyralid alone and in their mixture with&nbsp;intermediates formed during the photocatalytic&nbsp;degradation, in vitro growth of cell lines, MRC-5 and H-4-II-E was followed. After examining&nbsp; the photocatalytic&nbsp;degradation of selected herbicides in double distilled&nbsp;water, their decomposition in natural waters was also&nbsp;followed. Also, the influence of hydrogencarbonate and&nbsp;humic acid addition on the efficiency of degradation of&nbsp;selected herbicides was studied. Photocatalytic&nbsp;degradations of clomazone, picloram and mecoprop were&nbsp;investigated in the presence of UV/TiO_2&nbsp;nanotubes. Activities of the catalysts TiO₂&nbsp; Wackherr and TiO_2&nbsp;nanotubes were compared to TiO₂ Degussa P25.</p>

M.Tech. (Department of Chemistry, Faculty of Applied and Computer Sciences), Vaal University of Technology. / To replace the conventional wastewater treatment technology, photocatalysis has the best potential due to its utilization of visible light to photodegrade organic and inorganic contaminants. However, agglomeration of nanoparticles leads to serious decrease in photocatalytic performance when applied in slurry form, due to hindrance effect. TiO2 semiconductor photocatalyst mediated advanced oxidation process is referred to as one of the most efficient technologies to degrade organic pollutants in water. However, TiO2 semiconductor for water purification hinders large scale applicability due to poor activity under visible light and the recombination of photogenerated electron and hole pairs. The modification of TiO2 semiconductor photocatalyst with carbon dots (CDs) is of high importance due to low toxicity, aqueous stability, enhanced surface area, economic feasibility, good biocompatibility and chemical inertness of CDs. Herein, strategies are highlighted to improve the activity of TiO2 semiconductor photocatalyst by coupling it with CDs and Fe2O3. In this study, we study the morphological influence of TiO2 nanostructures on photocatalytic degradation of tetracycline hydrochloride present in industrial wastewater. TiO2 nanostructures, nanotubes, nanospheres and nanofibers were Synthesized using the hydrothermal technique. TiO2 nanotubes, nanofibers and nanospheres were prepared by the hydrothermal treatment of TiO2 nanoparticles with different NaOH concentrations (5, 10 and 12 N) at 120 and 140 ˚C; afterwards, HCl was added until it reached pH 2. Both the crystalline phase and coordination of the TiO2 nanotubes, nanofibers and nanospheres were composed principally. Likewise, the surface area, pore volume and pore size of the TiO2 nanotubes, nanofibers and nanospheres changed with the NaOH rinsing treatment. The photocatalytic activity for tetracycline degradation were strongly enhanced by the nanofibers and nanotubes in the basic and acid media, respectively, showing a relationship between their structure and the medium. TiO2 nanostructures and the composite material were characterized by scanning electron microscope\SEM), X-Ray Diffraction (XRD), transmission electron microscope (TEM) and Fourier transform infrared (FTIR). BET surface area analysis was carried out using nitrogen adsorption desorption curves. The results show that TiO2 morphology had great influence on photocatalytic degradation of tetracycline hydrochloride due to difference in specific surface area and pore volume of nanostructures. The photocatalytic degradation experiments were carried out for three hours under visible-LED light. TiO2 nanofibers show better degradation performance than nanotubes and nanospheres due to presence of large surface area for reaction, higher porosity with dispersion of active sites at different length scales of pores and presence of oxygen vacancies. Agricultural biomass pine bark serves as a carbon source and was doped into TiO2-nanofibers (TNF) to fabricate the composite material (CD-TNF). CD-TNF composite nanofibers were prepared via a facile hydrothermal method. This study revealed that the photocatalytic efficiency of tetracycline (TC) under visible light irradiation of the composite nanofiber is higher than that of pure TiO2-nanofiber. The anchored CDs can both enhance the light absorption and suppress photogenerated electron hole recombination which results in the enhancement of catalytic and antibacterial properties. The CDs can better capture and transfer photogenerated electrons through the Ti-O-C and Fe-O-C bonds. Moreover, CDs can improve the utilization of photogenerated electrons and the electrons in CDs are captured by O2 to produce O2•- radicals and the role of O2•- radicals in the photocatalytic process is significantly improved. A new efficient photocatalyst consisting of TiO2/CD/Fe2O3 composite material was Synthesized by the hydrothermal treatment and applied in the photodegradation of 5 mg/L tetracycline hydrochloride (TC) under visible-LED light. The CDs/TiO2/Fe2O3 composite showed enhanced photocatalytic performance for tetracycline photodegradation when compared with TiO2/CDs and pure TiO2 under the visible light irradiation. The mechanism of the improved photocatalytic activity over CDs/TiO2/Fe2O3 was also investigated. The influence of the interface formation between Fe2O3 and TiO2/CDs affects severely the charges separation efficiency and enhances the electron transfer to keep on the existence of Fe3+/Fe2+ moieties that take significant role in the reaction mechanism.

PhD (Department of Chemistry, Faculty of Applied and Computer Sciences), Vaal University of Technology. / This research has investigated the effects of conjugation on the visible light absorption capacity of polyene modified TiO2 nanoparticles as well as the efficiency of these nanoparticles for the mineralisation of acetaminophen (APAP), a non-antibiotic and chloramphenicol (CAP), an antibiotic pharmaceutical compound (PC) which are commonly used worldwide. The efficiency of polyene modified TiO2 (CPE-TiO2) compared with bare TiO2 was further assessed for the mineralisation of the selected PCs under visible light. To achieve this aim, the synthesised nanoparticles were appropriately characterised and tested for the photocatalytic degradation of acetaminophen (APAP) and chloramphenicol (CAP), under visible light. Furthermore, the mechanism and the kinetics of photocatalytic degradation of the PCs were investigated by using high-performance liquid chromatography (HPLC) to monitor the photodegradation intermediates, e.g. Hydroquinone, p-nitrophenol and oxamic acid. The DRS UV-vis spectra result of the CPE-TiO2 indicated that it has a lower band-gap than bare TiO2 nanoparticles and demonstrated a better absorption ability in the wavelength range of 400-800 nm. This result was further confirmed by other optical analyses, such as electrochemical impedance spectrometry (EIS) and photoluminescence (PL). The analysis indicated a less recombination rate of electron/hole pairs in CPE-TiO2 compared to TiO2. Notably, CPE-TiO2 nanocomposite exhibited higher photocatalytic properties for both pollutants, compared to bare TiO2 under visible light. Importantly, photocatalytic degradation experiments demonstrated that the CPE modified nanoparticles were significantly more efficient for PCs degradation (94.21 % for APAP and 80.47% for CAP) compared to bare TiO2 (27.12% for APAP and 36.12% for CAP). The role of CPE-TiO2 photocatalysis in degrading APAP and CAP was examined by varying experimental parameters such as PC concentrations, catalyst loading and solution pH. All the parameters were observed to influence the degradation of the PCs to some extent, albeit, at optimum conditions, most of these PCs were degraded within 210 minutes of visible light irradiation. A significant relationship between the ionic state (+ve or -ve based on the pH) of the solution and CPE-TiO2 photocatalytic process was observed. For the mineralisation, CPE-TiO2 photocatalysis led to higher oxidation rates compared to direct photolysis and bare TiO2 photocatalysis. The results confirm that the co-existence of multiple bonds in poly-conjugated carbon chains with a reduced band-gap in CPE-TiO2 composite were able to enhance charge separation and migration as well as improve the photocatalytic efficiency. This study has clearly demonstrated that polyene modified TiO2 nanoparticles can be applied to degrade PCs in aqueous solution and offers an attractive option for small-scale pharmaceutical wastewater treatment. However, the complex nature of real effluents with co-existing pollutants and higher levels of organic and inorganic matter may call for possible coupling of a biological process as pre- or post-treatment to improve their biodegradability.

Ph. D. (Department of Chemistry, Faculty of Applied and Computer Sciences), Vaal University of Technology. / Aromatic organic contaminants are difficult to biodegrade, and thus effective green technologies are required to remove these pollutants from the ecosystem. Tetracycline antibiotic, an organic water pollutant, can be degraded by heterogeneous photocatalysis using an appropriate catalyst, with capability in converting the visible light energy into active species. The thesis focused on silver nanoparticles anchored on silver bromide (Ag/AgBr) as a plasmonic catalyst dispersed on activated carbon (ACK), were used as a photocatalyst (AABR-ACK) in tetracycline removal. The aim is to develop a catalyst that is active in low intensity visible light, whilst the addition of activated carbon will increase the light absorption and separate the charge pairs, after the photocatalyst has been excited by the visible light. The activated carbons were derived from pinecone pyrolyzed in a microwave. The pinecone mass to potassium hydroxide impregnation ratio and microwave pyrolysis time influenced the activated carbon properties. An impregnation ratio of 2.24 and microwave pyrolysis time of 16 minutes at constant microwave power of 400 W yielded the activated carbon with the best-developed porous structure and electrochemical properties. This activated carbon was used during the optimisation of the Ag/AgBr activated carbon (AABR-ACK) catalysts preparation using a thermal polyol precipitation method and response surface methodology. The most active catalyst was the AABR-ACK 11 obtained by a preparation temperature of 140 ºC, time (17.50 minutes), mass of surfactant and activated carbon (0.26 g and 0.03 g) respectively. This catalyst had an ordered nanospheres morphology, reduced electron-hole recombination rate, better electrochemical properties and exhibited enhanced activity on the tetracycline antibiotic removal in comparison to other Ag/AgBr activated carbon catalysts. A percentage degradation of 92% was obtained in 180 minutes were obtained with the AABR-ACK 11 catalyst. The photocatalyst prepared using the best activated carbon derived from pinecone developed in this study was compared to photocatalysts prepared using commercial activated carbon and biochar. The Ag/AgBr activated carbon catalysts using pinecone-derived activated carbon degraded the tetracycline to 92%, which is significantly higher than the percentage degradations (80% and 74%) for the catalyst prepared using commercial activated carbon and biochar catalysts respectively. The higher activity of the Ag/AgBr activated carbon catalysts using pinecone-derived activated carbon was due to the conductive attributes of the catalyst support for accelerated transfer of photo-induced electrons. The Ag/AgBr activated carbon catalysts using pinecone- derived activated carbon also exhibited better performance on tetracycline removal when compared to photocatalysts reported in literature. Two catalyst preparation methods, thermal polyol and deposition precipitation, were compared. The thermal polyol method yielded a more active catalyst for the degradation of the tetracycline in comparison to the deposition precipitation method. The degradation reaction conditions such as pH, light intensity and degradation temperature influenced the rate of the reaction. The highest rate of degradation was obtained at a pH of seven, white light and 40 ºC temperature. The intermediate products formed because of hydroxylation, deamination, demethylation and dehydration during the photocatalytic degradation of tetracycline antibiotics were identified using liquid chromatography mass spectrometer. Quenching experiments with hydroxyl, hole, and superoxide anion species showed that the most important radical responsible for the tetracycline degradation was the superoxide anion radical.

L’oxydation photocatalytique des Composés Organiques Volatils (COVs) apparaît comme un procédé très prometteur pour la réduction de la pollution atmosphérique. Ce travail avait pour objectif d’étudier l’oxydation photocatalytique de plusieurs COVs au sein d’un réacteur annulaire: méthyléthylcétone (MEK), acétone, 1-propanol ou encore triéthylamine (TEA). Dans une première partie, l’influence de plusieurs paramètres cinétiques tels que la concentration en polluant, l’intensité lumineuse, le temps de contact et le taux d’humidité a été étudiée. Un mécanisme de dégradation photocatalytique a été établi pour chaque polluant en fonction des sous-produits détectés par GC/MS. Dans une seconde partie, la diffusion de radicaux hydroxyles OH• dans la phase gazeuse, après activation photonique du TiO2, a été mise en évidence par Fluorescence Induite par Laser (LIF). Pour la première fois, ces radicaux OH• ont été détectés à des pressions proches des conditions atmosphériques. Dans ce cas, nous pouvons en conclure que la dégradation photocatalytique des COVs pourrait être partiellement due à une réaction en phase gazeuse entre les COVs et les radicaux OH• / Photocatalytic oxidation of airborne contaminants appears to be a promising process for remediation of air polluted by Volatile Organic Compounds (VOCs). The aim of our study is the photocatalytic oxidation of several VOCs using an annular reactor: methylethylketone (MEK), acetone, 1-propanol and triethylamine (TEA). First, the influence of different kinetic parameters such as pollutant concentration, incident light irradiance, contact time and humidity has been studied. A mechanistic pathway has been indeed proposed for each pollutant according to the produced intermediates species detected by GC/MS. Second, the diffusion of hydroxyls radicals OH• in gas phase, after photonic activation of TiO2, has been highlighted using Laser-Induced Fluorescence (LIF). For the first time, OH• radicals have been detected at atmospheric pressures, close to the major photocatalytic oxidation conditions, leading to the assumption that the photocatalytic degradation of VOCs might be at least partially occurs between pollutants and OH• radicals in gas-phase