Background and aims: It is known that smooth muscle possesses substantial mechanical plasticity in that it is able to adapt to large changes in length without compromising its ability to generate force. It is believed that structural malleability of the contractile apparatus underlies this plasticity. There is strong evidence suggesting that myosin thick filaments of the muscle are relatively labile and their length in vivo is determined by the equilibrium between monomeric and filamentous myosin. The equilibrium in turn is governed by the state of phosphorylation of the 20-kD regulatory myosin light chain (MLC20, or RLC). It is known that phosphorylation of the myosin light chain favors formation of the filaments; it is not known how the light chain phosphorylation affects the lability of the filaments. The major aim of this thesis was to measure the mechanical integrity of the filaments formed from purified myosin molecules from bovine airway smooth muscle, and to determine whether the integrity was influenced by phosphorylation of the myosin light chain. Methods: Myosin was purified from bovine trachealis to form filaments, in ATP containing zero-calcium solution during a slow dialysis that gradually reduced the ionic strength. Sufficient myosin light chain kinase and phosphatase, as well as calmodulin, were retained after the myosin purification and this enabled phosphorylation of RLC within 20-40 s after addition of calcium to the filament suspension. The phosphorylated and non-phosphorylated filaments were then partially disassembled by ultrasonification. The extent of filament disintegration was visualized and quantified by atomic force microscopy. Results: RLC phosphorylation reduced the diameter of the filaments and rendered the filaments more resistant to ultrasonic agitation. Electron microscopy revealed a similar reduction in filament diameter in intact smooth muscle when the cells were activated. Conclusion: Our results suggest that RLC phosphorylation is a key regulatory step in modifying the structural properties of myosin filaments in smooth muscle, where formation and dissolution of the filaments are required in the cells’ adaptation to different cell length.

Exocytosis is a fundamental cellular process where membrane-bound secretory granules from within the cell fuse with the plasma membrane to form fusion pore openings through which they expel their contents. This mechanism occurs constitutively in all eukaryotic cells and is responsible for the regulation of numerous bodily functions. Despite intensive study on exocytosis the fusion pore is poorly understood. In this research micro-fabrication techniques were integrated with biology to facilitate the study of fusion pores from cells in the anterior pituitary using the atomic force microscope (AFM). In one method cells were chemically fixed to reveal a diverse range of pore morphologies, which were characterised according to generic descriptions and compared to those in literature. The various pore topographies potentially illustrates different fusion mechanisms or artifacts caused from the impact of chemicals and solvents in distorting dynamic cellular events. Studies were performed to investigate changes in fusion pores in response to stimuli along with techniques designed to image membrane topography with nanometre resolution. To circumvent some deficiencies in traditional chemical fixation methodologies, a Bioimprint replication process was designed to create molecular imprints of cells using imprinting and soft moulding techniques with photo and thermal activated elastomers. Motivation for the transfer of cellular ultrastructure was to enable the non-destructive analysis of cells using the AFM while avoiding the need for chemical fixation. Cell replicas produced accurate images of membrane topology and contained certain fusion pore types similar to those in chemically fixed cells. However, replicas were often dehydrated and overall experiments testing stimuli responses were inconclusive. In a preliminary investigation, a soft replication moulding technique using a PDMS-elastomer was tested on human endometrial cancer cells with the aim of highlighting malignant mutations. Finally, a Biochip comprised of a series of interdigitated microelectrodes was used to position single-cells within an array of cavities using positive and negative dielectrophoresis (DEP). Selective sites either between or on the electrode were exposed as cavities designed to trap and incubate pituitary and cancer cells for analysis by atomic force microscopy (AFMy). Results achieved trapping of pituitary and cancer cells within cavities and demonstrated that positive DEP could be used as a force to effectively position living cells. AFM images of replicas created from cells trapped within cavities illustrated the advantage of integrating the Biochip with Bioimprint for cellular analysis.

Several nanomaterials systems, both inorganic and organic in nature, have been extensively investigated by a number of characterization techniques including atomic force microscopy (AFM), electron microscopy, Fourier transform infrared spectroscopy (FTIR), and energy dispersive x-ray spectroscopy (EDX). The first system consists of boron nitride nanotubes (BNNTs) synthesized via two different methods. The first method, silica-assisted catalytic chemical vapour deposition (SA-CVD), produced boron nitride nanotubes with different morphologies depending on the synthesis temperature. The second method, growth vapour trapping chemical vapour deposition (GVT-CVD), produced multiwall boron nitride nanotubes (MWBNNTs). The bending modulus of individual MWBNNTs was determined using an AFM three-point bending technique, and was found to be diameter-dependent due to the presence of shear effects. The second type of nanomaterial investigated is the biomineralized calcareous shell of the serpulid Hydroides dianthus. This material was found to be an inorganic-organic composite material composed of two different morphologies of CaCO3, collagen, and carboxylated and sulphated polysaccharides. The organic components were demonstrated to mediate the mineralization of CaCO3 in vitro. The final system studied is the proteinaceous cement of the barnacle Amphibalanus amphitrite. The secondary structure of the protein components was investigated via FTIR, revealing the presence of β-sheet conformation, and nanoscale rod-shaped structures within the cement were identified as β-sheet containing amyloid fibrils via chemical staining. These rod-shaped structures exhibited a stiffer nature compared with other structures in the adhesive, as measured by AFM nanoindentation.

We introduce a sensor which uses phase shifted dual diffraction gratings in order to increase the detectable range of motion when using phase sensitive diffraction for optical detection of displacement in probe microscopy. The modified FIRAT structure is comprised of a micro-machined bridge structure with integrated diffraction gratings for use in optical detection. With this new design and modified geometry/fabrication process, we will demonstrate force sensing structures with improved displacement detection range and dynamic response. The structure is based upon a previous implementation of force sensor modified for use in AFM imaging. It is built upon a transparent substrate and the bridge / grating serve as an integrated electrostatic actuator. The previously introduced an AFM sensor structure, with integrated actuator, can feasibly obtain Pico Newton force resolution along with increased bandwidth. The advantages of the integrated phase-sensitive diffraction grating and electrostatic actuator over other cantilever based implementations are well developed, yet the FIRAT structure suffered from limited displacement detection range of about ë/4 (167.5 nm for ë = 670 nm), its dynamics were dominated by squeeze film damping and the stiffness was not suitable for many imaging applications. This limitation in range was not due to the device physical structure or actuator, but was inherent to the optical detection scheme used. Modifications to the previous structure design, and sensor detection scheme, are implemented in order to increase the detectable range of the sensor implementation, reduce damping and stiffness, and custom tailor our devices to imaging applications

The adsorbed layer morphology of a series of surfactants under different conditions has been examined primarily using atomic force microscopy (AFM). The morphologies of single and double chained quaternary ammonium surfactants adsorbed to mica have been characterised using AFM at concentrations below the cmc. Mixing these different types of surfactants systematically allowed a detailed examination of the change in adsorbed film curvature from the least curved bilayers through to most curved globules. From this study a novel mesh structure was discovered at curvatures intermediate to bilayers and rods. A mesh was again observed in studies examining the morphology change of adsorbed nonionic surfactant films on silica with variation in temperature. Other surfactant mixtures were also examined including grafting non-adsorbing nonionic surfactants and diblock copolymers into quaternary ammonium surfactant films of different morphologies.

Thesis (Ph. D.)--University of Texas at Austin, 2007. / Vita. Includes bibliographical references.

Thesis (M.S.)--Texas State University-San Marcos, 2007. / Vita. Appendices: leaves 69-80. Includes bibliographical references (leaves 81-83).

Thesis (M.Eng.). / Written for the Dept. of Mechanical Engineering. Title from title page of PDF (viewed 2008/01/14). Includes bibliographical references.

Thesis (M.S. in Combat Systems Science and Technology)--Naval Postgraduate School, December 2008. / Thesis Advisor(s): Haegel, Nancy M. ; Luscombe, James. "December 2008." Description based on title screen as viewed on January 29, 2009. Sponsoring/Monitoring Agency Report Number: "DMR-0526330." Includes bibliographical references (p. 59-61). Also available in print.

Thesis (Ph. D.)--University of Missouri-Columbia, 2008. / The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on June 17, 2009) Vita. Includes bibliographical references.