Layer-by-layer (LbL) assembly has proven to be a powerful technique for assembling thin films with a variety of properties including electrochromic, molecular sensing, oxygen barrier, and antimicrobial. LbL involves the deposition of alternating cationic and anionic ingredients from solution, utilizing the electrostatic charges to develop multilayer films. The present work incorporates cationic antimicrobial agents into the positively-charged layers of LbL assemblies. When these thin films are exposed to a humid environment, the antimicrobial molecules readily diffuse out and prevent bacterial growth. The influence of exposure time, testing temperature, secondary ingredients and number of bilayers on antimicrobial efficacy is evaluated here. Additionally, film growth and microstructure are analyzed to better understand the behavior of these films. The antimicrobial used here is a positively-charged quaternary ammonium molecule (e.g. cetyltrimethylammonium bromide [CTAB]) that allow assemblies to be made with or without an additional polycation like polydiallyldimethylamine. While films without this additional polymer are effective, they do not have the longevity or uniformity of films prepared with its addition. All of the recipes studied show linear growth as a function of the number of bilayers deposited and this growth is relatively thick (i.e. > 100 nm per bilayer). In general, 10-bilayer films prepared with CTAB and poly(acrylic acid) are able to achieve a 2.3 mm zone of inhibition against S. aureus bacteria and 1.3 mm against E. coli when test are conducted at body temperature (i.e. 37oC). Fewer bilayers reduces efficacy, but lower test temperatures improve zones of inhibition. As long as they are stored in a dry atmosphere, antimicrobial efficacy was found to persist even when films were used four weeks after being prepared. The best films remain effective (i.e. antimicrobially active) for 4-6 days of constant exposure to bacteria-swabbed plates. This technology holds promise for use in transparent wound bandages and temporary surface sterilization.

This diploma thesis deals with the use of fluorescence correlation spectroscopy technique for microrheological characterization of hydrogel in a system of hyaluronate-cetyltrimethylammonium bromide. Fluorescently labelled particles were used for microrheological FCS analysis. To optimize the method the most appropriate size of particles was chosen on the basis of Newtonian glycerol solutions analysis. Among other things, the discussion was focused on the influence of refractive index change of analysed solutions on analysis results. After hyaluronate solutions analysis it was possible to assess the biopolymer concentration and molecular weight impact on the FCS microrheology results, which could then be compared with analysis results of model hydrogels of hyaluronate and CTAB. Finally, usability and limitations of FCS microrheology have been discussed.

Possibilities for increasing the upper limit of floatable particle sizs in the froth flotation process have been examined since the early beginnings of mineral flotation. The economic implications of such an incresae are far ranging; from decreased grinding costs and increased recoveries to simplified flow-sheet design and increased throughput, all leading to increased revenue. Bubble-particle detachment has been studied to better understand the factors influencing the strength of attachment and the energies involved. Direct measurements of bubble particle detachment were performed using a hanging balance apparatus (KSV Sigma 70 tensiometer) and using a submerged hydrophobic plate in water. Three experiments were used; direct force measurement of bubble-particle detachment, detachment force and energy of a bubble from a submerged hydrophobic plate, and detachment force and energy of a cetyltrimethylammonium bromide coated silica sphere from a flat bubble. Octadecyltrichlorosilane was used as a hydrophobic coating in the first two experimental methods. These experiments were recorded with a CCD camera to identify the detachment processes involved. Energies for both methods were calculated and divided into the two main steps of the detachment process: Three-Phase-Contact pinning and three phase contact line sliding. The first step represents the energy barrier which must be overcome before detachment can begin. It is directly related to contact angle hysteresis. Detachment occurs during the second step, where the solid-vapor interface is replaced by solid-liquid and liquid-vapor. This step corresponds to the work of adhesion. The effects of surface tension, contact angle and hysteresis were well demonstrated with the three experimental methods. Good correlation was found between theoretical work of adhesion and measured energies. / Master of Science

The diploma thesis deals with the preparation and characterization of catanionic complexes and their possible application to pharmaceutics and medicine. The catanionic complexes were prepared by mixing two oppositely charged surfactants with the concentration of 20 mmol·dm­3 in various volume ratios. Two systems were analyzed – CTAB + SDS and Septonex + SDS. Both systems were prepared in an aqueous and physiological environment. The turbidimetric analyses provided results of the intensity of turbidity of the prepared mixtures. The size and stability of the prepared particles were determined by DLS and ELS measurements. CTAB-rich samples showed significant viscosity changes and they were therefore characterized by rheological measurements. The results of this work show that the asymmetry of alkyl chains, surfactant selection, temperature, and ionic strength have a significant influence on the properties and self-assembly of surfactants in catanionic complexes.

This work is focused on interaction between hyaluronan (Hya) and amphiphilic molecules. Using fluorescent probes method were carried out screening of the interaction of various surfactants with Hya. For further examination was chosen cetyltrimethylammonium bromide (CTAB). Interactions in this system have also been studied using fluorescence correlation spectroscopy (FCS), and additionally were performed initial tests of the cytotoxicity of the system. As an alternative CTAB were also used hydrophobically modified amino acids. Results showed their self-aggregation, but their interactions with hylauronanem was not as strong as with CTAB. The interaction of gel systems Hya-CTAB have also been studied, and was found to contain a hydrophobic domain capable solubilize hydrophobic substance. Thermogravimetric have been established that are able to contain up to 98% wt. water and rheologically were characterized their mechanical properties. These are tunable due to molecular weight (MW) of the hyaluronate. With increasing value of MW increases mechanical strength of the gel and decreases its fluidity.

This diploma thesis deals with the preparation and characterization of negatively charged catanionic vesicular systems and their combination with selected polycations. The catanionic vesicular system was prepared by mixing of two oppositely charged surfactants SDS and CTAB. The negative charge as well as the stability of the vesicular system was provided by the incorporation of phosphatidic acid. Polycations, DEAE and TMC, have been selected for use in a pharmaceutical applications. Characterization of the prepared systems was performed by measuring DLS and ELS. The results indicate that we were able to prepare stable negatively charged vesicles that were eligible to non-covalently interact with selected polycations.

This thesis studies the properties and behaviour of phase-separated hydrogels prepared by interaction of hyaluronan with oppositely charged surfactants. Three representatives of surfactants, namely cetyltrimethylammonium bromide, chloride and p-toluensulfonate (CTAB, CTAC, CTAT), were selected for comparison. Using the method of rheology, the fact that the system of Hya-CTAT forms the most rigid hydrogels has been proved. Higher molecular weight of hyaluronan has also direct influence on the volume and stiffness of the newly formed hydrogels. Preparation methods were compared as well. Mixing the stock solutions of entry components appeard to be the most suitable. Small-angle X-ray scattering was used for determination of shape and size of surfactant's micelles, concluding that it has no effect on the volume of formed gels. The results of this study indicate that given gels are to a certain extent competitive and incorporation of hyaluronan into their structure is desirable with respect to its biological activity. This offers a potential usage of these substances in the field of medical applications.

This diploma thesis deals with study of hydrogels formed by phase separation of hyaluronan with oppositely charged surfactants cetyltrimethylammonium bromide (CTAB) and Septonex. It follows the bachelor thesis and extends the knowledge about the detailed characterisation of the inner environment of the hydrogel by determining the diffusion behaviour of the fluorescent probes Atto 488 and Nile Red using fluorescence correlation spectroscopy (FCS) technique and its modified version dual-focus fluorescence correlation spectroscopy (2f-FCS). Compared results showed that both methods show similar values and probes specifically interact with CTAB but Atto 488 shows only weak interaction with Septonex compared to Nile Red. Additionally, these interactions were not affected by the molecular weight of hyaluronan. In conclusion, it was recommended to measure this type of hydrogel in a small depth of gel using a conventional method.

[pt] Nanopartículas de ouro dispersas em água (AuNPs-H) e nanopartículas de ouro na presença dos surfactantes brometo de cetiltrimetilamônio (AuNPs-CTAB) e brometo de didecildimetilamônio (AuNPs-C10DAB) foram sintetizadas e caracterizadas por diversas técnicas. As variações nos perfis espectrais no UV-Vis dessas nanopartículas foram estudadas levando-se em consideração a intensidade e o comprimento de onda máximo da banda de ressonância plasmônica de superfície localizada (LSPR); foram acompanhadas em função do tempo para nanopartículas estocadas sob refrigeração (4 graus celsius) com as mantidas na temperatura ambiente (27 graus celsius). Um comportamento anômalo (mais instável) foi observado para AuNPs-C10DAB na concentração 1,0 ×10-4 mol L-1. As suas atividades catalíticas também foram avaliadas na presença de 4-nitrofenol e verificou-se que a cinética mais efetiva foi do sistema sem surfactante. Finalmente, um estudo de interação com aminoglicosídeos (AMG) foi feito visando o uso das nanopartículas como sonda analítica. Todavia, somente AuNPs-H apresentaram resultados satisfatórios, o que indica que o surfactante impede que o AMG se aproxime da superfície das nanopartículas, visto que, em concentrações mais elevadas de CTAB ou C10DAB, não há variação significativa no sinal original da sonda quando o AMG está presente. Um método analítico foi desenvolvido baseado na interação AuNPs-H-gentamicina e AuNPs-H-neomicina a partir da otimização dos parâmetros: concentração de AuNPs-H, tampão, tempo de medição e faixa de concentração de AMG. Na condição ajustada para sondagem quantitativa, cada dispersão de trabalho foi constituída por 40 porcento v/v (1,2 × 10-9 mol L-1) de AuNPs-H 1,0 mL de tampão citrato pH 4,0 (1,0 × 10-2 mol L-1) e volume final de 5,0 mL ajustado pela adição água ultrapura, após micro-volumes apropriados de soluçãoestoque de AMG (exceto na dispersão branco) ou de amostras adicionadas. O monitoramento da variação dos perfis espectrais foi feito em 511 e em 681 nm, habilitando a construção de curvas analíticas em 681, e na razão (681/511). Para gentamicina, a faixa linear variou de 0,6 a 600 microgramas L-1 com o limite de detecção (LD) de 0,06 microgramas L-1. Para neomicina, faixa linear foi de 7,3 a 550 microgramas L-1, tendo LD de 6,2 microgramas L-1. A aplicação do método foi feita determinando-se gentamicina (fortificação) em leite integral, e neomicina em solução controle (amostra aquosa simulada), medicamento e em saliva. Para habilitar a seletividade do método foi necessária a utilização de extração em fase sólida (SPE) em cartuchos comercias empacotados com polímero de impressão molecular de AMG. Em amostras de leite (40 microlitros), após limpeza e SPE, foi possível quantificar 1,72 mais ou menos 0,03 microgramas de gentamicina, o equivale a 39,1 mais ou menos 0,2 porcento. As recuperações para neomicina em amostras de medicamento foram de aproximadamente 45 mais ou menos 3,0 porcento (após SPE), indicando interferências de outros componentes. Neomicina também foi recuperada em amostras de saliva após uso do medicamento obtendo valores próximos a 0,36 mais ou menos 0,02 microgramas. Em contraste, as recuperações em amostras simuladas chegaram até 102,6 mais-menos 1,3 porcento (sem necessidade de SPE). Por fim foi feita uma avaliação comparativa de interação de AuNPs-H e nanopartículas de ouro sintetizadas com redução com citrato (AuNPs-citrato) que indicou diferença de comportamento na interação com AMG. / [en] Water-dispersed gold nanoparticles (AuNPs-H) and gold nanoparticles in the presence of surfactants cetyltrimethylammonium bromide (AuNPs-CTAB) and didecyldimethylammonium bromide (AuNPs-C10DAB) were synthesized and characterized using several techniques. The differences in the UV-Vis spectral profiles of these nanoparticles were studied monitoring the intensity and the localized surface plasmon resonance band (LSPR) maximum wavelength; these were monitored as a function of time taking into account storage conditions: under refrigeration (4 Celsius degrees) and at room-temperature (27 Celsius degrees). Anomalous (more unstable) profile was observed for AuNPs-C10DAB at 1.0 × 10-4 mol L-1. Their catalytic activities were also evaluated in the presence of 4-nitrophenol and it was shown that the most effective kinetics was observed for the system without surfactant. Finally, an interaction study with aminoglycosides (AMG) was conducted aiming the application of nanoparticles as analytical probe. Only AuNPs-H produced adequate results, indicating that the surfactant prevents interaction between AMG and the surface of the nanoparticles since at higher concentrations of CTAB or C10DAB there is no significant variation in the original probe signal in presence of AMG. An analytical method was developed based on the AuNPs-H-gentamicin and AuNPs-H-neomycin interaction taking into consideration the optimization of the parameters: AuNPs-H concentration, buffer, signal stabilization time and the AMG concentration range. In the adjusted condition for quantitative probing, each dispersion consisted of 40 percent v/v (1.2 × 10-9 mol L-1) of AuNPs-H, 1.0 mL of citrate buffer pH 4.0 (1.0 × 10-2 mol L-1) and final volume of 5.0 mL adjusted with ultrapure water addition, after appropriate micro-volumes of a stock solution of AMG (except in blank dispersion) or sample added. The spectral profiles were monitored at 511 and 681 nm, allowing theconstruction of analytical curves at 681, and at the ratio (681/511). For gentamicin, the linear range reached from 0.6 to 600 microgram L-1 with the limit of detection (LD) of 0.06 microgram L-1 . For neomycin, the linear range was 7.3 to 550 microgram L-1, with LD of 6.2 microgram L-1. The application of the method was made by determining gentamicin(fortification) in whole milk, and neomycin in control solution (simulated aqueous sample), pharmaceutical samples and saliva. In order to enable selectivity of the method it was necessary to use solid phase extraction (SPE) using a commercial SPE cartridge packed with an AMG molecular imprinted polymer. In milk samples (40 microlitre), after clean up and SPE, it was possible to quantify 1,72 plus-minus 0,03 microgram gentamicin, which is equivalent to 39,1 plus-minus 0,2 percent). Recoveries for neomycin in drug samples were approximately 45 plus-minus 3.0 percent (after SPE), indicating interferences of other components. Neomycin was also recovered in saliva samples after drug use obtaining values close to 0.36 plus-minus 0.02 microgram. In contrast, the recoveries in simulated samples reached up to 102.6 plus-minus 1.3 percent (no need for SPE). Finally, a comparative evaluation of the interaction of AuNPs-H and gold nanoparticles synthesized with reduction with citrate (AuNPs-citrato) was performed, indicating differences in terms of the interaction with AMG.

The deprotonation characteristics of fluorescent probes -naphthol and 8-hydroxypyrene-1,3,6-trisulphonic acid (HPTS) were studied in this diploma thesis, using steady-state and time-resolved fluorescence spectroscopy. Two cationic surfactants, Septonex and cetyltrimethylammonium bromide (CTAB), were studied. These surfactants were measured in the complex with hyaluronan (1.75 MDa, 1 MDa and 300 kDa). Steady-state fluorescence was used for determination of critical aggregation concentration of each surfactant and pKa*. Time-resolved fluorescence decays were used to calculate the average lifetimes and the deprotonation constants of naphthol and HPTS. The measurement with hyaluronan were compared with the polystyrenesulfonate (PSS) – surfactant system. The effect of hydration shell of hyaluronan on hyaluronan – surfactant complex formation results from the comparison of above mentioned systems. Large differences were found in the deprotonation characteristic between surfactants and even between individual molecular weights of hyaluronan. The measurement shows that the hydration shell is located near to the dissociated carboxyl groups of hyaluronan chain, where the interaction with the positively charged surfactants occurs. Furthermore, the aggregation number of Septonex was determined by quenching of pyrene using cetylpyridinium chloride (CPC) as a quencher. The aggregation number for 20 mM Septonex solution was determined as a value of 104 molecules. CPC was used for confirmation of the localization of -naphthol in the micelles of CTAB and polymer – CTAB, respectively.