Spelling suggestions: "subject:"[een] COMPUTED TOMOGRAPHY"" "subject:"[enn] COMPUTED TOMOGRAPHY""
21 |
A Computational Study into the Effect of Structure and Orientation of the Red Ear Slider Turtle Utricle on Hair Bundle StimulusDavis, Julian Ly 28 December 2007 (has links)
The vestibular system consists of several organs that contribute to ones sense of balance. One set of organs, otoconial organs, have been shown to respond to linear acceleration (1949). Hair bundles (and hair cells), which are the mechano-electric transducers found within otoconial organs, respond to displacement of the overlying otoconial membrane (OM). Structure, position and orientation of the OM within the head may influence the stimulus of hair bundles by changing the deformation characteristics of the OM. Therefore, studying the deformation characteristics of the OM with finite element models presents a unique advantage: the ability to study how different variables may influence the deformation of the OM.
Previous OM models have ignored complicated OM geometry in favor of single degree of freedom (De Vries 1951)or distributed parameter models (Grant et al. 1984; Grant and Cotton 1990; Grant et al. 1994). Additionally, OMs have been modeled considering three dimensional geometry (Benser et al. 1993; Kondrachuk 2000; 2001a), however OM layer thicknesses were assumed to be constant. Further, little research has investigated the effect of position and orientation of otoconial organs on the deformation of the OM (Curthoys et al. 1999), due to natural movement of the head.
The effect of structure, position and orientation of the utricle of a red ear slider turtle on the stimulation of hair bundles in the OM is investigated here. Using confocal images, a finite element model of the utricle OM is constructed considering its full 3D geometry and varying OM layer thickness. How specific geometric variables, which are missing from other OM models, effect the deformation of the utricle OM is studied. Next, since hair bundles are part of the structure of the OM, their contribution to the deformation of the utricular OM is quantified. Then, using computed tomography of a turtle head and high speed video of turtle feeding strikes, acceleration at the utricle during natural motion is estimated. Finally, the effects of orientation of the utricle in the head on the stimulus of hair bundles within the organ is investigated.
In summary, a model and methods are developed through which deformation of the turtle utricle OM through natural movements of the head may be studied. Variables that may contribute to utricle OM deformation are investigated. Utricle OM geometry, hair bundles, position and orientation all play a role in utricle OM deflection and therefore hair bundle stimulus. Their effects are quantified and their roles are discussed in this dissertation. / Ph. D.
|
22 |
Evaluation of the Normal Equine Pituitary GlandMcKlveen, Tori Leigh 10 June 2002 (has links)
Computed tomography (CT) is becoming more available as a diagnostic tool in the evaluation of the equine skull and brain. Objectives of this study were: 1) refine a CT protocol for evaluating the equine pituitary gland, 2.) define the CT anatomy of the pituitary region, 3.) determine a set of normal values for the pituitary dimensions (length, width, height, volume and weight), 4.) refine CT techniques for measuring pituitary size.
Horses were scanned using 10x10mm, 10x5mm, 4x4mm and 4x2mm slice thickness and interval combinations. The pituitary glands were removed immediately after CT and gross measurements were performed. CT measurements were compared with gross pituitary measurements using analysis of variance (ANOVA) in a randomized block design. Accuracy percentages were also calculated using gross measurements as the known value.
Mean dimensions of the histologically normal pituitary glands were: length 21.07mm, width 21.62mm, height 9.78mm and volume 2.66cm³. The weights ranged from 1.7g to 3.4g with a mean of 2.6g. Computed tomographic measurement analysis demonstrated that the 10mm slices were the most accurate way to estimate the length of the gland. The 4mm slices yielded the highest accuracy values for width, height and volume of the pituitary gland. The volume was underestimated by all interval and slice thickness combinations performed by CT. No evidence of an overlap effect was identified for any of the dimensions.
Our findings indicated that contrast-enhanced CT is an accurate technique for estimating pituitary linear dimensions. Three-dimensional CT volumetry may not be an accurate method for estimating pituitary volume. / Master of Science
|
23 |
Technique for Repeatable Hyperosmotic Blood-Brain Barrier Disruption in the DogCulver, Britt Wayne 09 July 1997 (has links)
Reversible hyperosmotic blood-brain barrier disruption (BBBD) has been used in pharmaceutical research as well as human medicine to enhance drug delivery across the blood-brain barrier. However a technique for repeatable BBBD in the canine has not been described. This study describes a repeatable technique for BBBD in the dog and evaluates the clinical and morphological effects of BBBD.
Using fluoroscopic guidance, an arterial catheter was directed into the internal carotid artery via the femoral artery in ten dogs. BBBD was achieved in 5 dogs using 25% mannitol while 5 control dogs received only saline. Following recovery, dogs were monitored for clinical signs before a second, non-survival procedure was performed 2-3 weeks later. BBBD was estimated using CT densitometry as well as Evan's blue staining on post-mortem exam. Histopathological evaluation of the brain was performed on all dogs.
Seven dogs completed the study. Two treatment dogs were lost after the first infusion with deteriorating neurologic function attributed to CNS edema and increased intracranial pressure. One control dog was lost due to vessel wall damage during catheterization. The remaining dogs exhibited only transient neurologic, ocular, and vasculature injury. Successful BBBD was demonstrated in all treatment dogs as evidenced by CT and Evan's blue staining. Histopathological evaluation revealed multifocal areas of infarction in all dogs indicating refinement of the technique is needed.
This study shows that repeatable disruption the BBB in the dog is possible and opens the way for further investigations of BBBD using the dog as a model. / Master of Science
|
24 |
Interobserver variation in reporting CT arthrograms of the shoulderFogerty, S., King, D.G., Groves, C., Scally, Andy J., Chandramohan, M. 20 November 2013 (has links)
Computed tomography (CT) arthrography of the shoulder is an imaging modality of great diagnostic accuracy with regard to glenohumeral instability and in particular labral lesions. Interpretation of the scans is made difficult by the frequent occurrence of normal anatomic variants and the complexity of injuries to the bone and soft tissues. We selected a continuous sample of 50 CT arthrograms of the shoulder and they were reported by two consultant musculoskeletal radiologists. The results were collated and analysed for the level of agreement.
Hill¿Sachs showed Kappa (K) statistic to be 0.37 (fair agreement), soft tissue Bankart 0.32 (fair agreement), bony Bankart 0.61 (substantial agreement), anterior capsular laxity 0.41 (moderate agreement) and glenohumeral osteoarthritis 0.20 (slight agreement). All the results were significant with a p value of <0.05. Nine (18%) of the 50 scans were in complete agreement.
The results demonstrate that there can be considerable interobserver variation (IOV) in the reports of a CT arthrogram of a shoulder. They highlight the potential difficulties in reporting such images and suggests ways in which the report could be more focussed to provide a clinically reliable report and one which matches the surgical findings accurately.
|
25 |
Performance of a cadmium tungstate MVCT scannerKirvan, Paul Francis 06 1900 (has links)
Megavoltage computed tomography (MVCT) and megavoltage cone beam computed tomography can be used for visualizing anatomical structures prior to radiation therapy treatments to assist in patient setup and target localization. These systems provide images using the same beam used for patient treatment, however their image contrast is limited by the low detective quantum efficiency (DQE) of the detectors currently available. By using higher DQE thick, segmented cadmium tungstate detectors we can improve the system contrast. This in turn would permit enhanced soft tissue visualization, allowing MVCT to be more useful.
This thesis describes the evaluation of a prototype MVCT system that uses thick, segmented detectors. The system was found to be able to easily visualize a 15 mm diameter 1.5% contrast target with 2 cGy of radiation dose delivered. This system could become the basis for improved commercial MVCT systems. / Medical Physics
|
26 |
Performance of a cadmium tungstate MVCT scannerKirvan, Paul Francis Unknown Date
No description available.
|
27 |
Fluence Field Modulated Computed TomographyBartolac, Steven J. 07 January 2014 (has links)
Dose management in CT is an increasingly important issue as the number of CT scans per capita continues to rise. One proposed approach for enhanced dose management is to allow the spatial pattern of x-ray fluence delivered to the patient to change dynamically as the x-ray tube rotates about the patient. The changes in incident fluence could be guided using a patient model and optimization method in order to deliver user-defined image quality criteria while minimizing dose. This approach is referred to as fluence field modulated CT (FFMCT). In this work, a framework and optimization method was developed for evaluating the dose and image quality benefits of FFMCT, both in simulated and experimental data. Modulated fluence profiles were optimized for different objects and image quality criteria using a simulated annealing algorithm. Analysis involved comparing predicted image quality maps and dose outcomes to those using conventional methods. Results indicated that image quality distributions using FFMCT agreed better with prescribed image qualities than conventional techniques allow. Dose reductions ranged depending on the task and object of interest. Simulation studies using a simulated anthropomorphic phantom of the chest suggest an average dose reduction of at least 20% compared to conventional techniques is possible, where local dose reductions may be greater than 60%. Across different imaging tasks and objects, integral dose reductions ranged from 20-50% when compared to a conventional bowtie filter. The results of this study suggest that given a suitable collimator approach, FFMCT could reap significant benefits in terms of reducing dose and optimizing image quality. Though the tradeoff between image quality and imaging dose may not be eliminated, it may be better managed using an FFMCT approach.
|
28 |
ガンマ線transmission computed tomographyを併用した肺血流分布測定TORIZUKA, Kanji, FUJITA, Toru, MINATO, Kotaro, TODO, Giro, MUKAI, Takao, ISHII, Yasushi, ITOH, Harumi, MAEDA, Hisatoshi, 鳥塚, 莞爾, 藤田, 透, 湊, 小太郎, 藤堂, 義郎, 向井, 孝夫, 石井, 靖, 伊藤, 春海, 前田, 尚利 11 1900 (has links)
No description available.
|
29 |
Fluence Field Modulated Computed TomographyBartolac, Steven J. 07 January 2014 (has links)
Dose management in CT is an increasingly important issue as the number of CT scans per capita continues to rise. One proposed approach for enhanced dose management is to allow the spatial pattern of x-ray fluence delivered to the patient to change dynamically as the x-ray tube rotates about the patient. The changes in incident fluence could be guided using a patient model and optimization method in order to deliver user-defined image quality criteria while minimizing dose. This approach is referred to as fluence field modulated CT (FFMCT). In this work, a framework and optimization method was developed for evaluating the dose and image quality benefits of FFMCT, both in simulated and experimental data. Modulated fluence profiles were optimized for different objects and image quality criteria using a simulated annealing algorithm. Analysis involved comparing predicted image quality maps and dose outcomes to those using conventional methods. Results indicated that image quality distributions using FFMCT agreed better with prescribed image qualities than conventional techniques allow. Dose reductions ranged depending on the task and object of interest. Simulation studies using a simulated anthropomorphic phantom of the chest suggest an average dose reduction of at least 20% compared to conventional techniques is possible, where local dose reductions may be greater than 60%. Across different imaging tasks and objects, integral dose reductions ranged from 20-50% when compared to a conventional bowtie filter. The results of this study suggest that given a suitable collimator approach, FFMCT could reap significant benefits in terms of reducing dose and optimizing image quality. Though the tradeoff between image quality and imaging dose may not be eliminated, it may be better managed using an FFMCT approach.
|
30 |
A New Approach for the Enhancement of Dual-energy Computed Tomography ImagesJanuary 2011 (has links)
abstract: Computed tomography (CT) is one of the essential imaging modalities for medical diagnosis. Since its introduction in 1972, CT technology has been improved dramatically, especially in terms of its acquisition speed. However, the main principle of CT which consists in acquiring only density information has not changed at all until recently. Different materials may have the same CT number, which may lead to uncertainty or misdiagnosis. Dual-energy CT (DECT) was reintroduced recently to solve this problem by using the additional spectral information of X-ray attenuation and aims for accurate density measurement and material differentiation. However, the spectral information lies in the difference between two low and high energy images or measurements, so that it is difficult to acquire the accurate spectral information due to amplification of high pixel noise in the resulting difference image. In this work, a new model and an image enhancement technique for DECT are proposed, based on the fact that the attenuation of a high density material decreases more rapidly as X-ray energy increases. This fact has been previously ignored in most of DECT image enhancement techniques. The proposed technique consists of offset correction, spectral error correction, and adaptive noise suppression. It reduced noise, improved contrast effectively and showed better material differentiation in real patient images as well as phantom studies. / Dissertation/Thesis / Ph.D. Bioengineering 2011
|
Page generated in 0.046 seconds