published_or_final_version / Chemistry / Doctoral / Doctor of Philosophy

In this thesis, atomic force microscopy (AFM), transmission electron microscopy (TEM) and optical microscopy techniques were used to investigate systematically the self-assembled nanostructure behaviour of two different types of spin-cast polymer thin films: poly(isoprene-b-ethylene oxide), PI-b-PEO diblock copolymers and [poly(9,9-dioctylfluorene-co-benzothiadiazole)]:poly[9,9- dioctyfluorene-co-N-(4-butylphenyl)-diphenylamine], F8BT:TFB conjugated polymer blends. In the particular case of the polymer blend thin films, the morphology of their composites with cadmium selenide (CdSe) quantum dot (QD) nanoparticles was also investigated. For the diblock copolymer thin films, the behaviour of the nanostructures formed and the wetting behaviour on mica, varying the volume fraction of the PEO block (fPEO) and the average film thickness was explored. For the polymer blend films, the effect of the F8BT/TFB blend ratio (per weight), spin-coating parameters and solution concentration on the phase-separated nanodomains was investigated. The influence of the quantum dots on the phase separation when these were embedded in the F8BT:TFB thin films was also examined. It was found that in the case of PI-b-PEO copolymer thin films, robust nanostructures, which remained unchanged after heating/annealing and/or ageing, were obtained immediately after spin coating on hydrophilic mica substrates from aqueous solutions. The competition and coupling of the PEO crystallisation and the phase separation between the PEO and PI blocks determined the ultimate morphology of the thin films. Due to the great biocompatible properties of the PEO block (protein resistance), robust PEO-based nanostructures find important applications in the development of micro/nano patterns for biological and biomedical applications. It was also found that sub-micrometre length-scale phase-separated domains were formed in F8BT:TFB spin cast thin films. The nanophase-separated domains of F8BT-rich and TFB-rich areas were close to one order of magnitude smaller (in the lateral direction) than those reported in the literature. When the quantum dot nanoparticles were added to the blend thin films, it was found that the QDs prefer to lie in the F8BT areas alone. Furthermore, adding quantum dots to the system, purer F8BT and TFB nano-phase separated domains were obtained. Conjugated polymer blend thin films are excellent candidates for alternatives to the inorganic semiconductor materials for use in applications such as light emitting diodes and photovoltaic cells, mainly due to the ease of processing, low-cost fabrication and mechanical flexibility. The rather limited optoelectronic efficiency of the organic thin films can be significantly improved by adding inorganic semiconducting nanoparticles.

No description available.

Philosophiae Doctor - PhD / The continuous increase in energy consumption and decrease in fossil fuels reserves are a primary concern worldwide; especially for South Africa. Therefore, there is an urgent need for alternative energy resources that will be sustainable, and environmentally friendly in order to tackle the ecological degradation generated by the use of fossil fuels. Among many energy ‘niches’, solar energy appears to be one of the most promising and reliable for the African continent because of the constant availability of sun light. Organic conjugated polymers have been identified as suitable materials to ensure proper design and fabrication of flexible, easy to process and cost-effective solar cells. Their tendency to exhibit good semiconducting properties and their capability to absorb photons from the sunlight and convert it into electrical energy are important features that justify their use in organic photovoltaic cells. Many different polymers have been investigated as either electron donating or electron accepting materials. Among them, poly(3-hexylthiophene) is one of the best electron donor materials that have been used in organic photovoltaic cells. It is a good light absorber and its Highest Occupied Molecular Orbital (HOMO) energy level is suitable to allow electron transfer into an appropriate electron acceptor. On the other hand, the molecular ordering found in dendrimers attracted some interest in the field of photovoltaics as this feature can ensure a constant flow of charges. In this work, I hereby report for the first time, the chemical synthesis of a highly crystalline dendritic star copolymer generation 1 poly(propylene thiophenoimine)-co-poly(3-hexylthiophene) (G1PPT-co-P3HT) with high molecular weight and investigate its application as donating material in bulk heterojunction organic photovoltaics.

Le domaine des senseurs chimiques et biochimiques est en pleine expansion, tant au niveau de la recherche fondamentale que du design et de la fabrication de nouveaux « nez artificiels ». Les recherches actuelles visent à la mise au point de dispositifs de taille réduite permettant l’identification et la quantification d’espèces multiples, avec une réponse rapide et réversible, une détection sensible et sélective, le tout intégré dans une technologie simple et peu coûteuse. Les composantes actives des nez artificiels dont il est question ici reposent sur l’utilisation en tant que composante active de polymères et molécules conjugués. Les polymères conjugués sont attractifs pour leur grande sensibilité (tributaire du processus de diffusion efficace des excitations électroniques le long des chaînes) tandis que les molécules conjuguées répondent généralement favorablement au cahier des charges imposé à un senseur, dont les interactions fortes et spécifiques entre le senseur et la molécule à détecter ou encore une grande stabilité chimique et photochimique. Dans ce contexte, le but de cette thèse est d’associer polymères et molécules conjugués pour mettre au point un dispositif hybride combinant les avantages des deux composantes. Afin de caractériser ces dispositifs et de les optimiser, nous nous sommes focalisés dans un premier temps sur l’étude des propriétés géométriques, électroniques et optiques des entités séparées, que nous avons étudiées par le biais de méthodes issues de la chimie quantique. D’une part, nous avons considéré les améliorations pouvant être apportées aux détecteurs moléculaires tant au niveau des limites de détection que de ses propriétés spectroscopiques. D’autre part, nous avons mené une étude mécanistique des processus de transfert d’énergie le long de chaînes de polymères conjugués rigides, en apportant une attention particulière sur les différentes approches envisageables pour en améliorer l’efficacité (effets conformationnels, introduction d’unités à longues durées de vie, écart énergétique donneur-accepteur). Enfin, sur base des résultats obtenus pour les constituants séparés, nous avons proposé des structures chimiques de systèmes ‘hybrides’, constitués de polymères conjugués substitués en bouts de chaîne par des groupements ionophores. Ces études ont été menées en étroite collaboration avec le groupe du Prof. Noël Boens à la KULeuven, où les molécules et polymères conjuguées étudiés théoriquement dans le cadre de ce travail ont été synthétisés et caractérisés d’un point de vue spectroscopique.

In Leuchtdioden wird Licht durch die Rekombination von injizierten Ladungsträgern erzeugt. Das kann einerseits in anorganischen Materialien geschehen. In diesem Fall ist es notwendig, hochgeordnete Kristallstrukturen herzustellen, die die Eigenschaften der Leuchtdioden bestimmen. Ein anderer Ansatz ist die Verwendung von organischen Molekülen und Polymeren. Auf Grund der Vielseitigkeit der organischen Chemie können die Eigenschaften der verwendeten halbleitenden Polymere schon während der Synthese beeinflusst werden. Außerdem weisen auch diese Polymere die bekannte mechanische Flexibilität auf. Die Herstellung von flexiblen, großflächigen Beleuchtungsquellen und Anzeigelementen ist so möglich.<br> Die erste Leuchtdiode mit einem halbleitenden Polymer als Emitter wurde 1990 hergestellt. Seither hat das Forschungsgebiet eine rasante Entwicklung genommen. Auch erste kommerzielle Produkte sind erhältlich. Im Zuge dieser Entwicklung wurde deutlich, dass die Eigenschaften von polymeren Leuchtdioden – beispielsweise Farbe und Effizienz – durch die Verwendung mehrerer Komponenten in der aktiven Schicht deutlich verbessert werden können. Gleichzeitig ergeben sich neue Herausforderungen durch die Wechselwirkungen der verschiedenen Filmbestandteile. Während die Komponenten oft entweder zur Verbesserung des Ladungstransportes oder zur Beeinflussung der Emission zugegeben werden, muss darauf geachtet werden, dass die anderen Prozesse nicht negativ beeinflusst werden. In dieser Arbeit werden einige dieser Wechselwirkungen untersucht und mit einfachen physikalischen Modellen erklärt.<br> So werden zunächst blau emittierende Leuchtdioden auf der Basis von Polyfluoren untersucht. Dieses Material ist zwar ein sehr effizienter blauer Emitter, jedoch ist es anfällig für chemische Defekte, diese sich nicht vollständig verhindern lassen. Die Defekte bilden Fallenzustände für Elektronen, ihr Einfluss lässt sich durch die Zugabe von Lochfallen unterdrücken. Der zugrunde liegende Prozess, die Beeinflussung der Ladungsträgerbalance, wird erklärt. Im Folgenden werden Mischsystemen mit dendronisierten Emittern, die gleichzeitig eine Falle für Elektronen bilden, untersucht. Hier wird die unterschiedliche Wirkung der isolierenden Hülle auf die Ladungs- und Energieübertragung zwischen Matrix und Farbstoffkern der Dendrimere untersucht. In Mischsystemen haben die Natur der angeregten Zustände sowie die Art und Weise des Ladungsträgertransportes einen großen Einfluss auf diese Transferprozesse. Außerden hat auch hier die Ladungsträgerbalance Auswirkungen auf die Emission. Um den Ladungsträgereinfang in Fallenzuständen zu charakterisieren, wird eine Methode auf Grundlage der Messung des zeitaufgelösten Photostroms in organischen Mischfilmen weiterentwickelt. Die erzielten Ergebnisse zeigen, dass die Übertragung der für geordnete Systeme entwickelten Modelle des Ladungsträgertransportes nicht ohne weiteres auf Polymersysteme mit hoher Unordnung übertragen werden können. Abschließend werden zeitaufgelöste Messungen der Phosphoreszenz in entsprechenden Mischungen aus Polymeren und organometallischen Verbindungen vorgestellt. Auch diese Systeme enthalten üblicherweise weitere Komponenten, die den Ladungstransport verbessern. In diesen Filmen kann es zu einer Übertragung der Tripletts vom Emitter auf die weiteren Filmbestandteile kommen. Bei Kenntnis der in Frage kommenden Wechselwirkungen können die unerwünschten Prozesse vermieden werden. / Light-emitting diodes generate light from the recombination of injected charge carriers. This can be obtained in inorganic materials. Here, it is necessary to produce highly ordered crystalline structures that determine the properties of the device. Another possibility is the utilization of organic molecules and polymers. Based on the versatile organic chemistry, it is possible to tune the properties of the semiconducting polymers already during synthesis. In addition, semiconducting polymers are mechanically flexible. Thus, it is possible to construct flexible, large-area light sources and displays.<br> The first light-emitting diode using a polymer emitter was presented in 1990. Since then, this field of research has grown rapidly up to the point where first products are commercially available. It has become clear that the properties of polymer light-emitting diodes such as color and efficiency can be improved by incorporating multiple components inside the active layer. At the same time, this gives rise to new interactions between these components. While components are often added either to improve the charge transport or to change the emission, it has to made sure that other processes are not influenced in a negative manner. This work investigates some of these interactions and describes them with simple physical models.<br> First, blue light-emitting diodes based on polyfluorene are analyzed. This polymer is an efficient emitter, but it is susceptible to the formation of chemical defects that can not be suppressed completely. These defects form electron traps, but their effect can be compensated by the addition of hole traps. The underlying process, namely the changed charge carrier balance, is explained. In the following, blend systems with dendronized emitters that form electron traps are investigated. The different influence of the insulating shell on the charge and energy transfer between polymer host and the emissive core of the dendrimers is examined. In the blend, the nature of the excited states as well as the method of the charge transport through the layer are of great importance to the transfer. Again, the charge carrier balance influences the emission. To characterize the trapping of charges in trap states, a method based on the measurement of transient photocurrents is enhanced. The results show that models developed for ordered systems can not simply be transferred to polymer systems with a high degree of disorder. Finally, time-resolved measurements of the phosphorescence decay in blends of polymers with organo-metallic compounds are shown. Usually, these systems contain more components that facilitate charge transport. Thus, triplets may be transferred from the phosphorescent dye other components of the film. Knowing the underlying interactions, unwanted processes can be suppressed.

Charge transport below the mobility edge, where the charge carriers are hopping between localized electronic states, is the dominant charge transport mechanism in a wide range of disordered materials. This type of incoherent charge transport is fundamentally different from the coherent charge transport in ordered crystalline materials. With the advent of organic electronics, where small organic molecules or polymers replace traditional inorganic semiconductors, the interest for this type of hopping charge transport has increased greatly. The work documented in this thesis has been dedicated to the understanding of this charge transport below the mobility edge. While analytical solutions exist for the transport coefficients in several simplified models of hopping charge transport, no analytical solutions yet exist that can describe these coefficients in most real systems. Due to this, Monte Carlo simulations, sometimes described as ideal experiments performed by computers, have been extensively used in this work. A particularly interesting organic system is deoxyribonucleic acid (DNA). Besides its overwhelming biological importance, DNA’s recognition and self-assembly properties have made it an interesting candidate as a molecular wire in the field of molecular electronics. In this work, it is shown that incoherent hopping and the Nobel prize-awarded Marcus theory can be used to describe the results of experimental studies on DNA. Furthermore, using this experimentally verified model, predictions of the bottlenecks in DNA conduction are made. The second part of this work concerns charge transport in conjugated polymers, the flagship of organic materials with respect to processability. It is shown that polaronic effects, accounted for by Marcus theory but not by the more commonly used Miller-Abrahams theory, can be very important for the charge transport process. A significant step is also taken in the modeling of the off-diagonal disorder in organic systems. By taking the geometry of the system from large-scale molecular dynamics simulations and calculating the electronic transfer integrals using Mulliken theory, the off-diagonal disorder is for the first time modeled directly from theory without the need for an assumed parametric random distribution.

In this diploma work, organic electrochemical transistors based on PEDOT:PSS have been studied, focusing on the influence of the geometry and physical dimensions on the transistor characteristics. The geometrical parameters studied are the area ratio between the gate and channel, the channel width and the channel length. Each parameter has been varied in five steps with each step containing three identical transistors. Results concerning the geometrical influence of the linear region resistance, the saturation current (density) and the on/off ratio are presented and discussed. Also, empirical curve-fits of the geometrical influence on the linear region resistance and the saturation current have been performed. In addition, tentative results of the locus of the saturation current versus saturation voltage for specific transistors have been obtained.

Oligo(ethylene glycol) groups have been used as substituents in poly(p-phenyleneethynylene)s (PPEs) to provide solubility, and to boost quantum yield. Properties such as water-solubility and increased quantum yield in aqueous solution make these conjugated systems promising for biosensory applications. In this thesis, a PPE containing a branched ethylene glycol side chain is synthesized as part of a polymer array for glycan biosensing. I also report that the same side chain can be put to use in a red-emissive polymer to lend water solubility. Another monomeric unit, containing ethylene glycol chains, is incorporated into a PPE to create an ampiphilic polymer. The versatility of these polymers allows them to be used for a variety of purposes, some of which will be described herein.

Dithienopyrrole-based conjugated materials, including oligomers and polymers, for potential organic electronic applications, were designed, synthesized and characterized. The optical and electrochemical properties of these materials were investigated, and their structure-property relationships were studied. Some of the materials can be oxidized (or reduced) chemically or electrochemically. Furthermore, the utility of these materials in organic electronic devices, such as OFETs and OPVs, were assessed. In OFETs, they can function as hole-transport materials with mobilities up to 4.8 × 10-2 cm2/(Vs), and one example serves as an ambipolar material with comparable hole and electron mobilities of 1.2 × 10-3 and 5.8 ×10-4 cm2/(Vs), respectively. Some of the materials can also be used as electron donors in OPVs in conjunction with PCBM, and exhibited power conversion efficiencies up to 1.4% after optimizations. They may also be used in other applications such as electrochromic devices, photodetectors, and optical limiting.