The building in a question is a new build mixed-use building. It is situated in industrial area of Slavkov u Brna and is intended for employees of this area. In the underground floor is situated collective garage for 18 personal automobiles. First floor is designed for retail sale. Specifically general store, boutique and cafe. In the second and third floor are accommodation units for area employees. Specifically 12 accommodation units. Building has a flat roof with asphalt strip coating. The load-bearing system of the building is designed as a reinforced concrete skeleton, THERM-type bricks are used for the construction while thermal comfort is achieved by a certified external thermal insulation composite system (ETICS) featuring façade polystyrene. There is parking space area in front of the building.

This diploma thesis deals with the design of an office building and the processing of project documentation for the construction. The office building is located in the Židenice in Brno, next to the Brno Židenice train station. This is a detached partly basement four-storey building with a flat roof. The underground floor serves primarily as a collective garage for 25 vehicles including parking spaces in the local stacking system. On the ground floor of the building there are three rentable spaces for retail with storage facilities and sanitary facilities for employees. The other of the building is used for administrative purposes. On the second above ground floor there are cell offices, on the third and fourth floors above ground the office spaces are rather as a open space. The construction system of the building is frameral with infill masonry made of ceramic fittings, the foundations are made of reinforced concrete slab and walls made of waterproof concrete. The foundations under the non-basement part are made of reinforced concrete foundation footing. Next to the office building, there are also eight parking spaces for shop visitors.

The subject of this diploma thesis is the project documentation of the new building - pension U Odry in Přerov-Kozlovice. Accommodation capacity is 36 people. In the pension there is also restaurant. The building is designed as a three-storey. On the first floor there are rooms for guests entering the accommodation facility, facilities for accommodation, technical facilities of the building and the restaurant, including premises for its operation. There are guest rooms on the second and third floors. The bases are made up of strip foundations. The external loadbearing mansards and partitions are made of YTONG lightweight concrete blocks. The internal loadbearing masonry is made of SILKA lime-sand blocks. The ceiling structure is designed from SPIROLL prestressed concrete floor slab. The roofing of the building is solved using flat vegetation roofs.

The subject of the diploma thesis is the design documentation for the construction of low-energy building. This is a hotel komplex, which is located in the city of Brno-Bohunice. The hotel has four floors, no basement and a warm flat roof. On the ground floor there is a hotel restaurant with facilities for employees, main hall, social facilities, wellness and technical facilities. The part of first floor consists of conference halls and a gym. In other parts of hotel are designed 47 guest rooms. Two guest rooms are for people with reduced mobility. The accommodation capacity of the hotel is 82 people. There are uncovered parking spaces for cars and one bus, tennis courts and a hotel garden on the plot. The structural system is combined with reinforced concrete columns and brick blocks. Horizontal structures are designed as cast-in-place reinforced concrete floor. The construction is based on foundation pad and strip foundation. The external wall is built from hollow clay blocks and insulated with external thermal insulation composite systém. The diploma thesis is processed to the extent of design documentation for construction.

This aim of the diploma thesis is the design of hotel with restaurant, outdoor parking and garage in Brno - Kníničky, Hrázní street on sloping plot no. 3570 and 3571. The hotel is with partial basement and has five above-ground floors. The total capacity of the hotel is 99 guests in 50 guest rooms. Structural systém is cast-in-place concrete frame. Infill wall are from clay masonry Heluz. Partition is from plasterboard partition. External wall are with contact thermal insulation system. Part of the external wall have ventilated facade. Floor structure is from cast-in-place reinforced concrete floor. The roof is green roof. The outdoor parking consists of ten parking spaces, fice of which are barrier-free for people with reduced mobility. Residue parking spaces are in the garage opposite the hotel. From the side of the hotel are parking spaces for hotel staff. On plot are designed playground.

This diploma thesis deals with the design of multifunctional building in Tábor in cadastre unit of Klokoty. It is a detached building with one underground floor and three above-ground floors on a flat terrain. The building is rectangular shape where the underground floor is a collective garage at the ground floor are shops a hairdresser and a café and at the last two floors are office spaces. The building is designed as frame systém with infill ceramic masonry with additional insulation. The roof is designed as a flat roof.

The subject of this diploma thesis is the project documentation of the new multifunctional building on the plot in Oslavany. The building is planted in the shape of a letter L.

Design of heating of hotel type. The first part describes the analysis of the building and heating heat pumps theory and evaluation systems with heat pump. In the second part we find two variants of technical solutions. The third part contains solutions for selected variant and it is heating with gas boiler.

The Master´s thesis subject is a design and an estimation of the load-bearing structure of a multi-storeyed building. The structure has a miscellaneous ground-plan shape consisting of three rectangular tracts and it is placed in the building basement under the ground level. The load-bearing structure involves walls and a floor slab which rises up vertically closer to the ground level in the central tract. Among further components being solved belong stairs, basement slab and beam. The load-bearing structure is solved monolithically as steel concrete component.

Diploma thesis deals with problematics of offtake of flue gasses. In experimental part there was measured compound of flue gasses by analyzator of flue gates. Aplication is a project of heating of object of The Academy of Sciences of the Czech Republic in Brno. Project solves design of heating system, flue and of source of heat. Heating area is created by floor convectors,towel rails and radiators. Source of heat is designed in two variants : as a cascade of condensation boilers and as a cascade of low-temperature boilers.