This diploma thesis deals with the project documentation of the reconstruction of a mixed-use building in Radnice, which is designed as a four-floor. In the first floor are premises of a post office a pharmacy. The second and the third floor is designed for the management of the city and there is a public library in the fourth floor. The structural system is a cast-in-place concrete frame with the precast floor slabs and the gabled roof. The building is located in a terraced house on a square.

This thesis deals with influence on structure changes of panel building. It is about type B70/R, to which was collected necessary design documentation. Static analysis is performed by ANSYS software. 29 models was created to focus on stress and displacements. Verification of selected wall according to Eurocode is also included.

Annotation The aim of the thesis is new-building design of mixed-use building in cadastral of community Nové Mesto nad Váhom. Building is situated at free estate in the marginal of community. Building estate must have new feeder road built. In front of building will be the parking area. The mixed-use building is detached and four-storied building. At basement is situated underground garage for ten cars and store houses for flats. At first floor is situated cafe and commercial space. Cafe has kitchen, stock rooms and WC. Commercial space has staff facilities and sales area. One of the shops has back door to stock room. Parking space for staff is next to building. At second and third floor is situated eight flats. Four flats has 3 rooms and four left has 2 rooms. Each flat has got stock room, WC and bathroom. In each flat is situated entrance to the terrace. Terrace is on extensive green roof orientated to southwest. In the flats is kitchen together with living room because of bigger space. Floor in the flats is combination of ceramic tiles and laminated floor. Area with flats has a lift. Concrete foundations are on micropiles. Project is set up with system LIVETHERM building has heat cladding. At the building are plastic windows and colour is matching with facade. Foothpath around building are from interlocking pavement. Whole documentation is prepared to realization of building. Drawing documentation is prepared by software AUTOCAD.

The thesis is focused on the overview of the diagnostic methods for engineering surveys reinforced concrete constructions. The practical part explains engineering surveys of industrial building, evaluation of concrete strength on existing building and results from search reinforcements on individual elements. Next part is focused on load testing precast floor slab removed from construction and evaluation load capacity. The last part include structural design of elected parts (precast floor slab and beam).

The aim of my diplom thesis is a project of a boarding house with a restaurant. The project is created in form of project documentation including all problems and related issues. The building is situated in Bystřice pod Hostýnem. The building is without cellar with three above-ground floors and it is built from brick system POROTHERM and prestressed concrete floor slab SPIROLL. The construction has warm flat roof. Concerning house-building plot, terrain is flat without any inclination. This project is primarily focused on functional, disposal and architectural aspects of building.

The final thesis is focused on a design of an apartment house and processing of the design documentation. Designed building is situated on the periphery of the town Chrudim in the locality of the housing estate Na Větrníku. It’s a detached house with five floors and a basement. Building has a rectangular plan with dimensions 30,92 × 17,17 m. The foundation of the building is designed as a combination of piles and strips. The vertical constructions will be made of the clay blocks. The floor structures are designed as cast-in-place reinforced concrete floors. The apartment house has a saddle roof with a slope 15°. There are 25 apartments in the building and the mass garages for 15 cars, which are situated in the basement. The garages will serve to the residents of the house.

The aim of the final thesis was to design and check the steel loadbearing structure of the exhibition pavilon. The basis for the structural design was a specified building layout. The assessment of the structure was made according to valid czech and european standards, including the system of "Eurocodes". Construction is situated in Zlin. The rectangular plan of the building is 45,0 m wide and 48,0 m long. The peripheral field of the roof is flat, while the central field is designed as a barrel roof. Main truss was designed with 6,0 m centre to centre distance. Structural design of the main loadbearing elements was made by the Dlubal RFEM v.5.07 software. Selected structure elements, including joints and column anchors were verified manualy.

This diploma thesis (A POLYFUNCTIONAL BUILDING) was prepared at the level of a project documentation. The theme of this diploma thesis is a project of the polyfunctional building with offices, tenis club and coffe room. The projected building should be located in the city Jemnice. The house is designed as the FIVE-floor building, with partial basement. The house is built of brick blocks POROTHERM, in basement od concrete blocks. The ceilings of the house are made out of fundamentals roofs Miako. The partitions are combination of brick systems POROTHERM and Rigips plasterboard partitions. The roof is flat double-coated Fatrafol foil.

The subject of the thesis is design and check of steel load-bearing structure of a footbridge. The footbridge spans the river Svitava in the town Blansko. The span length is 24 metres. The structural design is spatial bar structure with two main trusses. The upper and lower chords are curved in the shape of circular arch and they are connected by diagonal bars. In the level of the upper and lower chords the beams are connected by floor beam. Horizontal rigidity of the upper and lower construction area is secured by bracings. The bridge deck is laid on the lower floor beam. The solution is the result of the comparison and evaluation of two variants.

The aim of this thesis is design of an apartment building for students. The design is in the range of the documentation for designing building construction based on the decree 499/2006 Sb. as amended by decree 62/2013 Sb. The building is situated on the plots 1220, 1219/1, 1218/11 and 1218/2 in the cadastral area „Letovice“. The new building is designed to accommodate students for year-round occupancy. There is a dining room for staying students and students from nearby schools as well. In the new building are also multimedia classrooms, library, reading rooms, club rooms, gym and lecture hall available for students. In the building are 30 rooms. The capacity of the building is designed to accommodate 81 students. The building has three floors, a loft and no basement. Masonry is designed from clay blocks and floor slab is designed as a cast-in-place reinforced concrete floor structure.