The topic of this dissertation is a new building of Multifunctional building in Třebíč on parcelas number 1237, 1238, 1239. The Multifunctional building is situated on nursery sloping terrain. It´s designed as a four-floor house without a cellar. Ground plan size of the object are 15,35 m x 44,3 m. Parapet is situated 12,95 m high over the first floor. The building is build on a concrete foundations. From the point of view of construction the building is combination of a concrete breeze-block which are in ground floor and ceramic breeze-block which are in another floor of the building. Ceiling is designed from prefabricated filigran floor slab produced out of special liapor concrete. Staircase is iron-concrete with ceramic pavement. The object is roofed with flat roof which is drain of water using roofdrain.

Master’s thesis „Nursery School" is proceed in form of project document, including all requirement according to standards and regulations. New building is located on parcel number 439/50 in city Přerov. Detached building has three floors and is partly cellarage. It is brick construction system based on packs. The roofs are flat, and constructed as single shell. Te floors are connected by prefabricated concrete staircase and by elevator. The nursery school is designed as a four departments building, with capacity of 96 children.

This thesis aims to design a bearing composite steel structure for five-storey administration building with ground plan dimensions 35,00 x 50,00 m. Designed building has L-shaped plan, flat roof and attic all the way around. The largest part of the plan area occupies office zone with dimensions of 48,60 x 18,90 m. Contiguous zone communication and sanitation has dimensions of 13,50 x 15,90 m. Floor height is designed 3,60 m, the total height of the building is 18,70 m. Composite steel floor structure consists of transverse primary beams and hinge-connected secondary beams. Integrated formwork (trapezoidal sheet) has ribs oriented perpendicular to the secondary beams. Coupling is bidirectional. Construction will be done in two variants. Variant No.1 assumes primary and secondary beams (at the columns) hinge-connected with columns. In variant No.2 will be frame connection between primary beams and columns and together they will create 2D transverse frames with hinge-connected secondary beams. The supporting structure of the roof is designed similarly to ceiling, but reinforced concrete slab will be replaced with bracing in the roof plane and self-bearing rib sandwich panels. Vertical sheathing of the building provide sandwich panels and strip windows. The type of steel is S355. The building is designed for the site Hradec Králové. Standards and documents used in design of the bearing structure are included in the list of sources. The result of this work is a static analysis with an assessment of all elements of the selected (best) variant of the structure, drawing documentation and technical report.

The diploma thesis deals with the constructive-technological project of the administrative building in Humpolec.This project mainly addressed construction by the building structures, site equipment, implementation of cast-in-place reinforced concrete floor, budget and chronological plan of buildings. The work was based on the project for implementation.

The subject of this thesis is the solution of a new building of nursery school in the part of city Brno – Tuřany. It is a cellarless, detached building and single-storey building. Nursery school will be two classes with 40 children. The floor plan is irregularly – shaped plan with orientation of the classes to the east. Building is designed from structural masonry system Porotherm with contact thermal insulation system. Roofing is solved with use of two different slopes of timber girder.

Diploma thesis deals with a new built multifunctional building in Brno on Mlynska street. The intention is to change of use of lucrative corner site brownfield. The new building has four aboveground floors and one underground floor. The ground floor will have small restaurant and two separated shopping units. The second floor is divided into three office spaces. The third and fourth floors are designed as flats of different categories. The underground floor will be used for storage spaces, boiler room with separate pellet storage and parking shaft system. Construction system is designed as a wall construction system made of sand-lime bricks. Ceiling constructions and staircases are designed as a cast-in-place concrete. The building is roofed with the flat green roofs and terrace, which will be used for relaxation of residents.

This Master’s thesis deals with sanitation installation in historic building. The theoretical part of the topic analysis deals with the issue waste water discharge from the building and ground floor. Furthermore, the theoretical solutions are processed sanitation installation and variants of it. Preferable variant is finalized the details of the implementation of the project.

Diploma thesis Multifunctional building is compiled in the form of project documentation. The building is located in Brno, Vinařská street. It´s a building with four overground floors designed primarily to housing and one underground floor, which is mainly used as collective garage. The building will be made from POROTHERM blocks with the mineral heat insulation. The ceilings will be made of reinforced concrete. The building has a single-layer flat roof.

This thesis describes a new building of recreational guest house with restaurant. Rereational guest house has three floors. The building hasn’t got a basement. The guest house has got fourteen residential units, one of which is wheelchair accessible. Recreational guesthouse is not designed in a passive standard. However, it is built with respect to the appropriate orientation to the cardinal, taking into account the orientation of the main entrance to the south. Recreational guest house, is designed to match the local architecture.

The submitted diploma thesis deals with the design of a new building for public amenities - Educational and cultural centre in the cadastral area of the municipality Wallachian Bystřice. The building is of a complex ground plan shape that should symbolize crystal growing from the hillside. The building is located in the centre of the village. The building is designed as a single-storey with a technical floor for pipework and ductwork. The building is based on the foundation slab. The bearing structure of the building is created from a reinforced concrete load-bearing wall in combination with wooden circular columns and sandwich panels from KVH profiles. The roof is formed by circular purlins and rafters. The roof structure is a single casing green intensive and extensive. In terms of the features, the building is divided into two main parts consisting of the exhibition part and the congress part, both units have their own entrances and sanitary facilities.