The aim of my diploma thesis is the elaboration of the project documentation for the construction of the administrative building. It is a seven-storey building with one underground and six above-ground floors. The underground floor is halfway under the terrain and used for garage parking. The loose part will be used for barrier-free entrance to the building and partly as a cafe. Above-ground floors are used as office spaces. The administrative building is designed as a monolithic reinforced concrete structure in the underground floor, the above-ground floors are designed as a column monolithic system for flexible use of office space. The static calculation will be carried out according to valid ČSN EN standards.

This diploma thesis deals with the design of an end dwelling house with a café in Žatec (district of Louny). It is a partly basement, detached object on a slightly sloping terrain. The apartment building has one underground floor and three above-ground floors. It consists of six housing units of varying size and layout. On the ground floor there is a cafeteria, while on the second and third floor there are always 3 flats. The end house has an atypical ground plan and is roofed with honeycomb roof. The project is processed using the ArchiCAD computer program.

This diploma thesis is focused on design cast-in-place reinforced concrete structure multi-storey multifunctional building according to the source material. Specifically, foundation slab and external wall in B1 taking into account the waterproofness of the construction. Then staircase, column in lowest storey and two floor slab are designed as selected load-bearing structure. Elements are dimensioned according to ČSN EN 1992-1-1: Design of concrete structures - general rules and rules for building structures. In the drawing part of the diploma thesis are drawn drawings of the shapes and reinforcement.

The aim of this bachelor thesis is variant design and assessment of loadbearing structure of steel footbridge over I/11 route. Main superstructure will have two steel arched beams joined with lower orthotropic deck using suspenders in the „V“ shape. For assessment of superstructure a three-dimensional structural computational model was created in software Dlubal RFEM 5.20. The span of the footbridge is 48,71 m, free width is 4 m, height is 7,5 m. The structure was designed according to currently valid standarts to the ultimate limit state and serviceability limit state. Supporting elements are designed from steel of class S355.

Předmětem této diplomové práce je návrh a projektová dokumentace pětipodlažní multifunkční budovy se 2 suterénními podlažími pro parkování pro 52 aut. První 2 patra jsou veřejná - k pronájmu je 23 samostatných prostor. Horní 3 podlaží obsahují 18 bytů a mají samostatné vchody se dvěma schodišti a 2 výtahy. Budova má dvě úrovně střechy a obě jsou pochozí s malým parkem a vegetací. Budova se nachází v hlavním městě Slovenska, Bratislavě, na Obchodní ulici. Záměrem je nahradit dvě staré budovy ve velmi špatném stavu. Z architektonického hlediska má tato budova zapadat do historického vzhledu ulice úpravou tvaru oken a materiálů a zároveň působit mírně moderně. Z konstrukčního hlediska má budova rámové nosné konstrukce z betonových nosníků sloupů a obousměrně vyztužených betonových desek vyplněných dřevěnými konstrukcemi a lehké sádrokartonové příčky.

The main target of the thesis is design of a new building of the rehabilitation center in Havlíčkův Brod. The rehabilitation center consists of three part. The main (middle) part has two above-ground floors and a basement with flat roof and the other two parts have only ground floor with green flat roof. The main middle part contains reception, café, laundry room storage, utility room, manager‘s office and outpatients doctor‘s office. In the left part there are hydrotherapy, ergotherapy, magnetotherapy and electrotherapy. In the right part there are fitness center and physiotherapy rooms. Vertical load-bearing structures are Made of Porotherm ceramic blocks (above-ground floors) and the Hollow concrete blocks filled with C20/25 and reinforcement B500B (basement). Horizontal load-bearing structures are made of the prestressed Spiroll ceiling panels. The building site contains also outdoor car park and garden with pond. The project and visualization were carried out in the ArchiCad and Lumion programme. All structures comply with the valid standards and regulations.

The aim of the diploma thesis is composition of project documentation for construction of multifunctional building. Object is situated on the cadastral area of Třebíč in the location Na kopcích on the eastern part of city. Terain is slightly sloping. In the multifunctional bulding there are four above-ground floor and one below-ground floor. In the below-ground floor there are situated technical and storage spaces. In the first below-ground floor there are two entrances, the first one for administrative part and second one for residential part. The first and second above-ground floor is used for administrative purposes. The third and fourth above-ground floor is used for living in flats. Above part of the third above-ground floor there is roof made of extensive green roof and above the fourth above-ground floor there is roof made of a flat roof with a classical order of layers with waterproofing layer made of PCV-P. There is a lift in the part of object with flats. The vertical construction system of the building is wall-mounted, supplemented with girders and columns. The ceiling structures are made of reinforced concrete monolithic slabs. The staircase is monolithic reinforced concrete.

DIPLOMA THESIS IS IS FOCUSED A PROJECT OF A NEW HOME FOR THE ELDERLY IN THE MUNICIPALITY BŘEZINA U KŘTĚTELY AT THE SURFACE NUMBER 312 / 1,310,311,309,308 / 3,308 / 2,308 / 1. CONTAINS A COMPLETE DOCUMENTATION FOR THE CONSTRUCTION. THE BUILDING IS SITUATED IN THE TERRITORY OF SOUTH MORAVIAN REGION. THE LAND IS SLIMLY SLOW AND ITS TOTAL AREA 2274 M2. THE BUILDING HAS THREE FLOOR FLOORS. THE OBJECT IS BASED ON THE FOUNDATION STRIPS AND ARE ROOFED WITH A VEGETABLE FLOOR ROOF. VERTICAL CONSTRUCTIONS ARE DESIGNED FROM A WALL CONSTRUCTION SYSTEM USING CERAMIC BRICK BLOCKES. CURRENT CONSTRUCTIONS ARE COMPLETED WITH CONTACT INSULATING SYSTEM IN ACCORDANCE WITH ETICS PRINCIPLES. CEILINGS ARE MONOLITHIC REINFORCED CONCRETE SLABS. 19 APARTMENT UNITS ARE DESIGNED IN THE BUILDING. THE CAPACITY OF THE APARTMENT UNIT IS MOSTLY SINGLE IN MOST CASES. A PRACTICAL PHYSICIAN ORDINATION AND A SERVICE AREA IS DESIGNED IN THE PART OF THE OBJECT. THIS PART IS AVAILABLE TO THE WIDE PUBLIC. DRAWING PART WAS PROCESSED IN AUTOCAD.

The diploma thesis deals with the design of the boarding house located in Lipnice nad Sázavou district of Havlíčkův Brod. The thesis contains complete design documentation for building construction, including assessment in terms of building physics and buildings fire protection. The construction has a U-shaped platform, with two-storey buildings facing each other, connected by a single-storey middle part, where house background is located. We will find here restaurant, kitchen, playroom, wellness, two barrier free rooms, thirteen regular double rooms and eight two-room apartments Construction is brick of sand-lime blocks, insulated by contact thermal insulation system. The ceilings are made of prestressed concrete floor slab. The roof above the two-storey buildings is saddle roof, where the load-bearing structure is formed by a truss. On the single-storey part there is a flat roof, where the supporting structure consists of prestressed concrete floor slab.

My diploma thesis occupies with project documentation for building of house with the day care, with conformity of legal regulation and technical standards. My work solves the buildings dispositions with proposal of right construction system and supporting system with using right materials, important for me was the integration into near built-up area on the periphery of town. My diploma thesis evaluates the building from the point of view of building physics. It verifies warm-technical and sound-isolating properties of constructions, from the suggested materials and it verifies the materials with standards values.