Spelling suggestions: "subject:"[een] MATERIAL ENGINEERING"" "subject:"[enn] MATERIAL ENGINEERING""
1 |
Otimização de céria dopada com gadolínia e zircônia dopada com ítria / Optimization of gadolinia doped ceria and yttria doped zirconiaTanaka, Reinaldo Norio 17 August 2018 (has links)
Orientadores: Wagner dos Santos Oliveira, João Carlos Castro Abrantes / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Química / Made available in DSpace on 2018-08-17T20:21:02Z (GMT). No. of bitstreams: 1
Tanaka_ReinaldoNorio_M.pdf: 3112364 bytes, checksum: 7a29a907295d025de170c9779b26c793 (MD5)
Previous issue date: 2011 / Resumo: As pilhas a combustível de óxido sólido (SOFC) têm um horizonte muito promissor graças ao uso de hidrogênio e outros combustíveis menos poluentes, eficiência alta devido à temperatura de operação ser acima de 800ºC e sua vasta gama de aplicações, desde alguns quilowatts até centenas de megawatts. Um dos seus componentes mais importantes é o eletrólito, que cumpre o papel de fazer a condução dos íons O2- do cátodo para o ânodo e fazer ainda a separação física entre os eletrodos. No estudo das SOFCs há dois materiais de grande interesse para uso como eletrólitos: a zircônia dopada com ítria (YSZ) e a céria dopada com gadolínia (CGO). Neste trabalho se busca otimizar as propriedades condutoras e mecânicas destes materiais. Sinterizaram-se amostras destes dois materiais e para as análises utilizou-se MEV ao se avaliar as microestruturas e mensurá-las, e também espectroscopia de impedâncias para a medição do comportamento condutivo. A YSZ é o material mais estudado para eletrólitos em SOFCs, dada sua alta condutividade iônica a temperaturas acima de 800ºC e sua resistência mecânica. Neste trabalho sinterizou-se uma amostra de YSZ a partir de prensagem a quente, diminuindo a temperatura de 1500ºC para 1200ºC e utilizando uma pressão de 65 MPa. A amostra apresentou satisfatória densificação, condutividade semelhante à amostra de referência, porém sua condutividade nos contornos de grão foi inferior à referência. Quanto à CGO, este é um dos materiais mais cotados para se tornar o eletrólito para as SOFCs de temperatura intermediária, entre 500ºC-700ºC, já que nessa temperatura possui condutividade iônica maior do que a YSZ. O objetivo é sinterizar amostras de CGO com dopagem heterogênea, adicionando pequenas quantidades de céria e gadolínia. Verificou-se que os aditivos, tanto a céria quanto a gadolínia, migraram para os contornos de grão e modificaram sobremaneira os valores de condução iônica e em alguns casos até o mecanismo de condução / Abstract: The solid oxide fuel cell (SOFC) has a very promising horizon due to the use of hydrogen and other cleaner fuels, efficiency due to high operating temperature, above 800°C and its wide range of uses, from a few kilowatts to hundreds of megawatts. One of its most important components is the electrolyte, as its role is the conductor of O2- ions from the cathode to the anode and to separate physically the electrodes. In the study of SOFC there are two materials with large interest for use in electrolytes: yttria doped zirconia (YSZ) and ceria doped with gadolinia (CGO). This paper seeks to optimize mechanical and conductive properties of these materials. Some samples were sintered for each one of the two materials and SEM analysis was used to evaluate the microstructures and measure them, and impedance spectroscopy for the measurement conductive behavior. The YSZ is the most studied material for electrolytes in SOFC, due to its high ionic conductivity at temperatures above 800°C and mechanical strength; this paper will attempt to densify a sample of YSZ using hot pressing, reducing the temperature of 1500°C to 1200ºC and with a pressure of 65 MPa. The sample had a satisfactory densification, and its conductivity was similar to reference sample, but its conductivity at the grain boundaries was lower than the reference. The CGO is one of the most-quoted to become the electrolyte for intermediate temperature SOFC, between 500ºC-700°C, because in this temperature CGO has higher ionic conductivity than YSZ. This paper aims to sinter samples of CGO heterogeneous doping, adding small amounts of ceria and gadolinia. It was found that the additives, both as ceria and gadolinia, migrated to the grain boundary and changed greatly the values of ion conduction and in some cases the conducting mechanism / Mestrado / Ciencia e Tecnologia de Materiais / Mestre em Engenharia Química
|
2 |
On the Factors Influencing the Stability of Phases in the Multiferroic System BiFeO3-PbTiO3Kothai, V January 2015 (has links) (PDF)
Rhombohedral perovskite BiFeO3 is a single phase multiferroic compound exhibiting both magnetic (Neel temperature ~370˚C) and ferroelectric (Curie point ~840˚C) ordering well above the room temperature. Ferroelectricity in BiFeO3 is due to
stereochemically active 6slone pair in Biion which causes large relative displacements of Bi and O ions along the [111] direction. Long range spiral modulation of the canted antiferromagnetic spin arrangement in Feeffectively cancels the macroscopic magnetization due to Dzyaloshinskii–Moriya interaction and thereby prevents linear magneto-electric effect. Synthesizing dense pure BiFeO3 by conventional solid state method is difficult due to the formation of thermodynamically stable secondary phases such as Bi2Fe4O9, Bi25FeO39 and Bi46Fe2O72. To stabilize the perovskite phase and to suppress the cycloid several groups have adopted different strategies such as thin film growth, different synthesis methods and chemical substitution. Of the various substitutions reported in the literature, PbTiO3 substitution has shown very interesting features, such as (i) unusually large tetragonality (c/a~1.19), (ii) formation of morphotropic phase boundary (MPB) and (iii) high curie point Tc~650C. MPB ferroelectric systems such as lead zirconate titanate (PZT) are known to exhibit high piezoelectric response due to the coupling between strain and polarization. Hence the existence of magnetic ordering in BiFeO3-PbTiO3 offers an interesting scenario where polarization, strain and magnetization may couple together. The high Curie point also makes the system an interesting candidate for high temperature piezoelectric application. However its potential as a high temperature piezoelectric material has not been realized yet. A detailed review of literature suggests a lack of clear agreement with regards to the composition range of the reported MPB itself. Different research groups have reported different composition range of MPB for this system even for almost similar synthesis conditions.
The present thesis deals with broadly two parts, firstly with the preparation of pure BiFeO3 by co-precipitation and hydrothermal methods and its thermal stability and secondly resolving the cause of discrepancy in range of MPB reported in BiFeO3-PbTiO3 solid solution. Detailed examination of this system (BiFeO3-PbTiO3) around the reported MPB composition by temperature dependent X-ray, electron and neutron diffraction techniques, in conjunction with a systematic correlation of sintering temperature and time with microstructural and phase formation behavior revealed the fact that the formation of MPB or the single ferroelectric phase is critically dependent on the grain size. This phenomenon is also intimately related to the abnormal grain growth in this system.
Chapter 1 gives the brief overview of the literature on the topics relevant to the present study. The literature survey starts with a brief introduction about the perovskite oxides; their ferroelectric, magnetic and multiferroic properties were discussed in further sections. A brief outline on the grain growth mechanism is described. An overview of BiFeO3 and various synthesis methods, different chemical substitutions and their effect on properties are provided. A brief review of published literature on BiFeO3-PbTiO3 solid solution and its properties is also presented.
Chapter 2 deals with the synthesis of pure BiFeO3, heat treatment and characterisation. BiFeO3 was synthesised by (a) co-precipitation and (b) hydrothermal methods. In co-precipitation method, calcination of precipitate at different temperature resulted in the formation of BiFeO3 along with secondary phases (Bi2Fe4O9 and Bi24FeO39). The optimum calcination temperature to prepare pure BiFeO3 was found to be 560C. The synthesized pure BiFeO3 exhibits weak ferromagnetic hysteresis at room temperature, the degree of which increases slightly at 10K (-263C). The hydrothermal treatment was carried out in (a) carbonate and (b) hydroxide precipitates with KOH as mineralizer. BiFeO3 prepared using hydroxide precipitate was stable till 800C whereas with carbonate precipitate it was stable only till 600C.
Chapter 3 deals with the stability of phases in (1-x)BiFeO3 -(x)PbTiO3 solid solution. Samples prepared by conventional solid state route sometimes remain as dense pellet and on certain occasions it disintegrate completely into powder observed after sintering. Irrespective of the composition, sintering time and temperature, powder X-ray Diffraction (XRD) pattern of the survived pellet (crushed into powder) shows coexistence of rhombohedral (R3c) and tetragonal (P4mm) phases and the disintegrated powder (without crushing) show 100% tetragonal (P4mm) phase. Very high spontaneous tetragonal strain (c/a-1) ~0.19 at MPB is believed to be the origin for disintegration. But in all the survived pellets at least a minor fraction of rhombohedral phase (5-7%) is present. Systematic sintering studies with the time and temperature shows, decreasing the sintering temperature and time will increase the lifetime of the pellet and by increasing the sintering temperature and time the pellet will disintegrate. In this work we have conclusively proved that the wide composition range of MPB reported in the literature is due to kinetic arrest of the metastable rhombohedral phase and that if sufficient temperature and time is given, the metastable phase disappears. The suppression/formation of minor rhombohedral phase is expected due to the play of local kinetic factors during the transformation process. This makes the system behave in an unpredictable way with regard to the fraction of rhombohedral phase that is observed at room temperature.
A systematic X-ray and neutron powder diffraction study of the giant tetragonality multiferroic (1-x)BiFeO3 -(x)PbTiO3 have shown that the compositions close to the morphotropic phase boundary of this system present two different structural phase transition scenarios on cooling from the cubic phase: (i) Pm3m P4mm(T2)+P4mm(T1)
P4mm (T1) and (ii) Pm3m P4mm(T2) + P4mm(T1) + R3c P4mm (T1) + R3c. The comparatively larger tetragonality of the T1 phase as compared to the coexisting isostructural T2 phase is shown to be a result of significantly greater degree of overlap of the Pb/Bi-6s and Ti/Fe-3d with the O-2p orbitals as compared to that in the T2 phase. High temperature electron diffraction studies show that the metastable rhombohedral phase is present in the cubic matrix well above the Curie point as nuclei. Life time of the metastable R3c nuclei is very sensitive to composition and temperature, and nearly
diverges at x → 0.27. MPB like state appears only if the system is cooled before the metastable R3c nuclei could vanish.
Issue of the metastable rhombohedral state is developed further in Chapter 4. A one-to-one correlation was found between the grain size and phase formation behavior. Fine grained (~1µm) microstructure (usually pellets) shows phase coexistence (R3c+P4mm) and the disintegrated coarse grains (~10µm) show tetragonal (P4mm) phase. Microstructural analysis revealed the disintegration was caused by abnormal grain growth along with the disappearance of metastable rhombohedral phase. Abnormal grain growth starts at the periphery/crack i.e., at the free surface and move towards the canter of the pellet. Size reduction of disintegrated coarse grains (~10µm) to fine grains (~1µm) by crushing the sample showed that the system switching form pure tetragonal (P4mm) state to the MPB state comprising of tetragonal and rhombohedral phases (R3c+P4mm). In another approach the smaller sized particles of x=0.20 were synthesized by sol gel method. It was reported that in conventional solid state route x=0.20 exhibits pure rhombohedral phase. The sol-gel sample calcined at 500C (particle size ~15nm) stabilizes tetragonal metastable phase along with the stable rhombohedral phase, the morphotropic phase boundary state. Samples calcined at higher temperature, 800C (particle size ~50nm) also showed stable rhombohedral phase. Ferromagnetic behavior was observed in the sample having phase coexistence and the sample with pure rhombohedral phase showed antiferromagnetic behavior. Hence this material is a promising candidate which can be tuned to exhibit different behavior just by adopting different grain size.
Chapter 5 deals with the magnetic structure of (1-x)BiFeO3 -xPbTiO3 solid solution with change in composition and temperature. Magnetic structure was studied using powder neutron diffraction in the composition range x=0.05 -0.35. Rietveld analysis was carried out for the nuclear and magnetic phases, by considering R3c phase for the nuclear structure. To account for the magnetic Bragg peak at d=4.59Å, three antiferromagnetic models were considered for the magnetic structure: (i) helical spin arrangement as in BiFeO3, (ii) commensurate G-type antiferromagnetic ordering with moments in the a-b plane (of the hexagonal cell), and (iii) commensurate G-type ordering with moments parallel to the c-axis (of the hexagonal cell). The third model was found to be suitable to explain the magnetic peak accurately and the better fitting of magnetic peak was observed in this model compared to others. At room temperature the MPB compositions have rhombohedral and tetragonal nuclear phases along with the rhombohedral magnetic phase. Addition of PbTiO3 in BiFeO3 not only changes the
magnetic structure but also reduces the magnetic moment due to the substitution of Ti in Fesite. High temperature neutron diffraction studies reveal the magnetic transition at ~300C for x=0.20, ~95C for x=0.27 and ~150C for x=0.35. The Neel temperature observed in neutron diffraction studies were also confirmed by DSC and by temperature dependent dielectric studies. For x=0.20, anomalous variation in the lattice parameters and the octahedral tilt angle was observed across the magnetic transition temperature. In the magnetic phase, the c-parameter was contracted and the octahedral tilt angle slightly increased. This result suggests a coupling between spin, lattice and structural degrees of freedom around the transition temperature. Temperature dependent powder neutron diffraction study at low temperature from 300K (27C) to 4K (-269C) in x=0.35 shows the evolution of tetragonal magnetic phase at 200K (-73C) whose intensity is increasing with decrease in temperature. Below 200K, x=0.35 has rhombohedral and tetragonal magnetic and nuclear phases. While in x=0.27 at low temperature, rhombohedral magnetic and nuclear phases are present along with the tetragonal nuclear phase alone (the tetragonal magnetic phase is absent). We propose this discrepancy in the Neel temperature and the magnetic phase formation can be due to the probabilistic nature of the existence of metastable rhombohedral phase which was discussed earlier.
|
3 |
Data-Augmented Structure-Property Mapping for Accelerating Computational Design of Advanced Material SystemsJanuary 2018 (has links)
abstract: Advanced material systems refer to materials that are comprised of multiple traditional constituents but complex microstructure morphologies, which lead to their superior properties over conventional materials. This dissertation is motivated by the grand challenge in accelerating the design of advanced material systems through systematic optimization with respect to material microstructures or processing settings. While optimization techniques have mature applications to a large range of engineering systems, their application to material design meets unique challenges due to the high dimensionality of microstructures and the high costs in computing process-structure-property (PSP) mappings. The key to addressing these challenges is the learning of material representations and predictive PSP mappings while managing a small data acquisition budget. This dissertation thus focuses on developing learning mechanisms that leverage context-specific meta-data and physics-based theories. Two research tasks will be conducted: In the first, we develop a statistical generative model that learns to characterize high-dimensional microstructure samples using low-dimensional features. We improve the data efficiency of a variational autoencoder by introducing a morphology loss to the training. We demonstrate that the resultant microstructure generator is morphology-aware when trained on a small set of material samples, and can effectively constrain the microstructure space during material design. In the second task, we investigate an active learning mechanism where new samples are acquired based on their violation to a theory-driven constraint on the physics-based model. We demonstrate using a topology optimization case that while data acquisition through the physics-based model is often expensive (e.g., obtaining microstructures through simulation or optimization processes), the evaluation of the constraint can be far more affordable (e.g., checking whether a solution is optimal or equilibrium). We show that this theory-driven learning algorithm can lead to much improved learning efficiency and generalization performance when such constraints can be derived. The outcomes of this research is a better understanding of how physics knowledge about material systems can be integrated into machine learning frameworks, in order to achieve more cost-effective and reliable learning of material representations and predictive models, which are essential to accelerate computational material design. / Dissertation/Thesis / Doctoral Dissertation Mechanical Engineering 2018
|
4 |
Quantum Chemical Studies for the Engineering of Metal Organic MaterialsRivera Jacquez, Hector Javier 01 January 2015 (has links)
Metal Organic Materials (MOM) are composed of transition metal ions as connectors and organic ligands as linkers. MOMs have been found to have high porosity, catalytic, and optical properties. Here we study the gas adsorption, color change, and non-linear optical properties of MOMs. These properties can be predicted using theoretical methods, and the results may provide experimentalists with guidance for rational design and engineering of novel MOMs. The theory levels used include semi-empirical quantum mechanical calculations with the PM7 Hamiltonian and, Density Functional Theory (DFT) to predict the geometry and electronic structure of the ground state, and Time Dependent DFT (TD-DFT) to predict the excited states and the optical properties. The molecular absorption capacity of aldoxime coordinated Zn(II) based MOMs (previously measured experimentally) is predicted by using PM7 Theory level. The 3D structures were optimized with and without host molecules inside the pores. The absorption capacity of these crystals was predicted to be 8H2 or 3N2 per unit cell. When going beyond this limit, the structural integrity of the bulk material becomes fractured and microcrystals are observed both experimentally and theoretically. The linear absorption properties of Co(II) based complexes are known to change color when the coordination number is altered. In order to understand the mechanism of this color change TD-DFT methods are employed. The chromic behavior of the Co(II) based complexes studied was confirmed to be due to a chain in coordination number that resulted in lower metal to ligand distances. These distances destabilize the occupied metal d orbitals, and as a consequence of this, the metal to ligand transition energy is lowered enough to allow the crystals to absorb light at longer wavelengths. Covalent organic frameworks (COFs) present an extension of MOM principles to the main group elements. The synthesis of ordered COFs is possible by using predesigned structures andcarefully selecting the building blocks and their conditions for assembly. The crystals formed by these systems often possess non-linear optical (NLO) properties. Second Harmonic Generation (SHG) is one of the most used optical processes. Currently, there is a great demand for materials with NLO optical properties to be used for optoelectronic, imaging, sensing, among other applications. DFT calculations can predict the second order hyperpolarizability ?2 and tensor components necessary to estimate NLO. These calculations for the ?2 were done with the use of the Berry's finite field approach. An efficient material with high ?2 was designed and the resulting material was predicted to be nearly fivefold higher than the urea standard. Two-photon absorption (2PA) is another NLO effect. Unlike SHG, it is not limited to acentric material and can be used development of in vivo bio-imaging agents for the brain. Pt(II) complexes with porphyrin derivatives are theoretically studied for that purpose. The mechanism of 2PA enhancement was identified. For the most efficient porphyrin, the large 2PA cross-section was found to be caused by a HOMO-LUMO+2 transition. This transition is strongly coupled to 1PA allowed Q-band HOMO-LUMO states by large transition dipoles. Alkyl carboxyl substituents delocalize the LUMO+2 orbital due to their strong ?-acceptor effect, enhancing transition dipoles and lowering the 2PA transition to the desirable wavelengths range. The mechanism 2PA cross-section enhancement of aminoxime and aldoxime ligands upon metal addition of is studied with TD-DFT methods. This mechanism of enhancement is found to be caused by the polarization of the ligand orbitals by the metal cation. After polarization an increase in ligand to ligand transition dipole moment. This enhancement of dipole moment is related to the increase in 2PA cross-sections.
|
5 |
Une approche analyse de cycle de vie intégrée pour la durabilité. Application à l'évaluation environnementale de processus de dessalement de l'eau (dans le cas d'Arabie Saoudite) / An integrated life cycle assessment approach for sustainability. Application to environmental evaluation of water desalination process (in the case of Saudi Arabia)Alhazmi, Hatem 22 December 2014 (has links)
La rareté de l'eau douce de bonne qualité pour l'humanité est un problème qui devient de plus aiguë (d'actualité). Les populations humaines croissantes ainsi que l'augmentation des activités industrielles et agricoles jouent un rôle majeur dans l'épuisement et la pollution des ressources en eau douce. Cette situation devient de plus en plus grave dans des pays disposant de ressources limites d'eau comme l'Arabie Saoudite qui est le plus grand pays au monde sans ressources naturelles d'eau douce. En même temps, l'Arabie saoudite est le troisième plus grand consommateur d'eau par habitant dans le monde. Pour remédier à cette pénurie d'eau douce, différentes technologies de dessalement d'eau de mer sont utilisées actuellement. Malgré plus de trente-deux usines de dessalement, le pays fait face à un défi de taille pour alimenter sa population avec eau en quantité suffisante (nécessaire). Dans ce contexte, en premier lieu, nous présentons un procédé pour produire la quantité requise d'eau, avec un impact minimum sur l'environnement, tout en maintenant sa bonne qualité. En outre, les possibilités pour l'utilisation des énergies alternatives pour réduire l'impact environnemental des besoins de dessalement sont examinées, ainsi que la pertinence des différents types d'énergie alternative qui pourraient être utilisés dans le cas particulier de l'Arabie Saoudite. L'analyse du cycle de vie (ACV) étant une méthode holistique de l'évaluation des impacts environnementaux des produits, a été utilisée pour évaluer l'impact environnemental du processus de dessalement et en identifier les principales raisons de cet impact. A cet effet, une collaboration avec une usine de dessalement en Arabie Saoudite a été mise en place, soldée par de multiples visites sur place. Ces dernières nous ont permis de comprendre le processus de dessalement, recueillir des données nécessaires et considère les possibilités d'introduire des sources d'énergie alternatives pour alimenter l'usine de dessalement. Afin d'évaluer l'impact environnemental du processus de dessalement une ACV basée sur le logiciel SimaPro a été réalisée. Les résultats de l'étude ont montré que le choix le plus pertinent concernant la technologie de dessalement dans le contexte de l'Arabie Saoudite est l'Osmose inverse (RO). Le modèle LCA a également montré que l'électricité produite à partir de combustibles fossiles a été responsable de 92,8% des dommages environnementaux causés. En outre, l'étude a montré, que les solutions les plus appropriées pour approvisionner en électricité la technologie RO de dessalement sont l'énergie solaire et l'énergie éolienne au lieu du pétrole brut fossile actuellement utilisé. L'ACV a montré également que l'utilisation de l'énergie alternative comme source d'énergie au dessalement peut réduire considérablement l'impact environnemental. / The scarcity of fresh water with enough (good) quality for human been is a problem which becomes more acute day by day. The increasing human populations along with increasing industrial and agricultural activities are adding more burden towered the depletion and pollution of fresh water resources. This situation becomes more serious in countries with limit water resources as Saudi Arabia which is the largest country in the world without natural fresh water resources. At the same time, Saudi Arabia is the third-largest per capita water consumer worldwide. To overcome the water shortage, sea water desalination technology has been used so far. Despite more than thirty-two desalination plants, the country faces a significant challenge to supply its population with the required amount of water. In this context, in the first place, this thesis presents a method for producing the required amount of water with minimal environmental impact while maintaining the required water quality need to be developed. Further, the possibilities of alternative energy in reducing the environmental impact from desalination needs are investigated, along with the suitability of different types of alternative energy that could be utilized in the particularly case of Saudi Arabia. Life cycle assessment (LCA) being a holistic method of assessing the environmental impacts of products it was used to assess the environmental impact of the desalination process and identifying the main reasons behind this damages. For this purpose, a collaboration with a desalination plant in Saudi Arabia was set up, which included visiting the plant several times. This allowed us to understand the desalination process, collect the required data and consider the possibilities of introducing alternative energy sources to power the desalination plants. In order to assess the environmental impact of the desalination process a LCA based on SimaPro software was performed. The results of the study showed that the most likely choice of desalination technology within the Saudi Arabian context is Reverse Osmosis (RO) desalination. The LCA model showed also that electricity produced from fossil fuel was the responsible of 92.8% of the environmental damages. Further, the most suitable alternatives to produce electricity to RO desalination are solar energy and wind energy instead of fossil crude oil. The LCA showed that using alternative energy as the source to supply electricity to desalination may substantially reduce the environmental impact.
|
6 |
[en] DEVELOPMENT OF MICROALLOYED STEEL FOR THE PRODUCTION OF REBAR / [pt] DESENVOLVIMENTO DE AÇO MICROLIGADO PARA A PRODUÇÃO DE VERGALHOES NERVURADOSLEONARDO MIRANDA NUNES 18 January 2018 (has links)
[pt] O desenvolvimento de um aço microligado para a produção de vergalhões
nervurados, busca atender a modernização das estruturas de concreto armado e
a industrialização na construção civil que solicitam novos desenvolvimentos nas
técnicas de construção e nos materiais aplicados. As barras de aço nervuradas
são um dos principais produtos empregados na produção de peças e estruturas
de concreto armado sendo usadas largamente por todo o mundo. A otimização
da aplicação final, a necessidade de manter baixos custos de produção e
atender a combinação de alta resistência com grande ductilidade em um material
com características de soldabilidade destinados a armaduras de concreto
armado, se tornou um grande desafio para os produtores de vergalhões para a
construção civil. Aplicando a tecnologia desenvolvida ao longo dos últimos 50
anos, este trabalho oferece a alternativa de se empregar aços microligados ao
vanádio e nióbio para a produção em laminadores de alta produção de rolos de
vergalhões capazes de atender a indústria da construção civil nos mais rigorosos
atributos solicitados. Os experimentos foram realizados em escala industrial
testando aços com faixa de 0,14 porcento a 0,20 porcento de vanádio e até 0,04 porcento de nióbio.
Os resultados atendem as normas mais exigentes no mercado mundial. / [en] The development of microalloyed steel for the production of reinforcement
bars (rebar) seeks to achieve the modernization of reinforced concrete structures
and streamline industrialization in civil construction that demands new
developments in techniques and applied materials. Rebar is one of the main
products used in the production of reinforced concrete all over the world. The
optimization of the final application and the necessity to keep production low
costs while attempting to combine high resistance with great ductility in a material
with weldability characteristics, became a great challenge for the producers of
rebars. Applying the technology developed throughout the last 50 years, this work
offers the alternative of using vanadium and niobium microalloyed steel to
produce large quantities of rebars in rolling mills. Upon completion these rebar
are used in coils capable of meeting the most rigorous demands of the civil
construction industry. The experiments made in an industrial environment,
applied steels with 0.14 percent to 0.20 percent of vanadium and up to 0.04 percent of niobium. The
results met the most demanding standards in the world-wide market.
|
7 |
Schriftenreihe Werkstoffe und werkstofftechnische AnwendungenWielage, Bernd, Lampke, Thomas, Wagner, Guntram, Wagner, Martin Franz-Xaver, Undisz, Andreas 15 May 2013 (has links)
Die Schriftenreihe „Werkstoffe und werkstofftechnische Anwendungen“ behandelt Themengebiete der Werkstoffwissenschaft und -technik, der Oberflächentechnik sowie deren industriellen Anwendungen. Es werden aktuelle Forschungsergebnisse aus den vier Professuren des Instituts für Werkstoffwissenschaft und Werkstofftechnik der TU Chemnitz vorgestellt: Professur Elektronenmikroskopie und Mikrostrukturanalytik, Professur Verbundwerkstoffe und Werkstoffverbunde, Professur Werkstoff- und Oberflächentechnik,
Professur Werkstoffwissenschaft. Weiterhin sind in der Schriftenreihe die Tagungsbände des jährlich am Institut stattfindenden „Werkstofftechnischen Kolloquium“ enthalten. Die einzelnen Bände beschäftigen sich mit den Forschungsgebieten Galvanische Metallabscheidung, Anodisieren, Thermisches und Kaltgas-Spritzen, Löten, Verbundwerkstoffe, Werkstoffverbunde, Wärmebehandlung, CVD-Beschichtungen/PVD-Beschichtungen, Simulation in der Beschichtungstechnik, Organisches Beschichten (Pulverbeschichten, Lackieren, Sol-Gel-Verfahren), Elektrochemisches Strukturieren, Thermomechanische Behandlung und Mechanische Werkstoffeigenschaften. / The book series „Werkstoffe und werkstofftechnische Anwendungen“ outlines up-to-date topics of material science and engineering, surface engineering as well as resulting industrial applications. Mainly, recent research results of the departments Composite Materials and Surface Engineering/Functional Materials of the Institute of Material Science and Engineering of Chemnitz University of Technology are presented. In addition, the book series includes the proceedings of the annual in-house conference “Werkstofftechnisches Kolloquium”. The separate volumes concentrate on the following fields of scientific research: Galvanised Coating, Anodising, Thermal and Cold Spraying, Soldering and Brazing, Composite Materials, Composite Structures, Thermal and Thermomechanical Treatment, CVD and PVD Coating, Simulation of Coating Processes, Organic coating (Powder Coating, Varnishing, Sol-Gel Processes), Electrochemical Structuring and Mechanical Material Properties.
|
8 |
Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen15 May 2013 (has links)
Die Schriftenreihe „Werkstoffe und werkstofftechnische Anwendungen“ behandelt Themengebiete der Werkstoffwissenschaft und -technik, der Oberflächentechnik sowie deren industriellen Anwendungen. Es werden vorrangig aktuelle Forschungsergebnisse der Professuren Verbundwerkstoffe und Oberflächentechnik/Funktionswerkstoffe des Instituts für Werkstoffwissenschaft und Werkstofftechnik der TU Chemnitz vorgestellt. Weiterhin sind in der Schriftenreihe die Tagungsbände des jährlich am Institut stattfindenden „Werkstofftechnischen Kolloquium“ enthalten. Die einzelnen Bände beschäftigen sich mit den Forschungsgebieten Galvanische Metallabscheidung, Anodisieren, Thermisches und Kaltgas-Spritzen, Löten, Verbundwerkstoffe, Werkstoffverbunde, Wärmebehandlung, CVD-Beschichtungen/PVD-Beschichtungen, Simulation in der Beschichtungstechnik, Organisches Beschichten (Pulverbeschichten, Lackieren, Sol-Gel-Verfahren), Elektrochemisches Strukturieren, Thermomechanische Behandlung und Mechanische Werkstoffeigenschaften. / The book series „Werkstoffe und werkstofftechnische Anwendungen“ outlines up-to-date topics of material science and engineering, surface engineering as well as resulting industrial applications. Mainly, recent research results of the departments Composite Materials and Surface Engineering/Functional Materials of the Institute of Material Science and Engineering of Chemnitz University of Technology are presented. In addition, the book series includes the proceedings of the annual in-house conference “Werkstofftechnisches Kolloquium”. The separate volumes concentrate on the following fields of scientific research: Galvanised Coating, Anodising, Thermal and Cold Spraying, Soldering and Brazing, Composite Materials, Composite Structures, Thermal and Thermomechanical Treatment, CVD and PVD Coating, Simulation of Coating Processes, Organic coating (Powder Coating, Varnishing, Sol-Gel Processes), Electrochemical Structuring and Mechanical Material Properties.
|
Page generated in 0.0411 seconds