The degree work is dedicated to MRI problems of compatible transmitter. The physical principle of magnetic resonance and the description of the construction of magnetic resonance apparatus are discussed in the first part of the work. Next the possibility of data transmission by means of infrared radiation and data transmission through USB are dealt with. The second part of the work is dedicated to the very implementation of transmitter and receiver, their hardware and software components. The discussion of the functionality of the apparatus and its utilization form part of the work.

This diploma thesis deals with the design of temperature sensor and display units, which communicate via a WLAN network. The theoretical part provides an overview of various methods of temperature measurement including several specific types of temperature sensors, and also introduces the WLAN standard as well as TCP and UDP protocols. The design solution is focuses first on the system architecture and design of the communication protocol, followed by the implementation of both types of equipment, starting with selection of components, through design diagrams and printed circuit board patterns, up to production and commissioning. The following parts of this thesis deal with the design of programs for the controlling microcontroller units of both units and the configuration application for PC.

This Diploma thesis deals with creation and realisation of extensions for medical dental unit Vizio. Specifically, it deals with electrotechnical solution and software for capacitive keyboard and with proposal of principle of control and regulation of speed for integrated brushless motor. The Diploma thesis contains both the description of used hardware components, and software solution implemented in assembly language. This device is already in commercial use.

This term paper deals with subject of wireless communication of city rail transport cars. In this paper are described individual modules for transmission and receiving of data containing communication between city rail transport cars and measures of siding switches. Then there are discussed possibilities of design of system for testing functionality of transmitting and receiving modules and the system is consequently designed. There are also described communication principles and protocol used for wireless communication and MODBUS protocol used for communication over RS-485 serial line. In the end was the system manufactured, completed and equipped with necessary software.

This work deals with designing complete equipment of paludarium. Selection of individual components to simulate jungle conditions and automate the process of maintaining the forest conditions in a closed environment. All components of the project will be automatically controlled to maintain a user-set conditions inside paludariums. The measured data will be stored on the SD card.

The aim of this thesis is design stereo digital to analog convertor for school laboratory usage. Scope of the thesis covers the design of all the functional units: input signal circuit, S/PDIF receiver, D/A converter, high quality analog output stage with active low pass filter. Thesis also cover design of all control and indicating parts containing microcontroller with control parts, alphanumeric OLED display and setting indicators.

This thesis describes designing of a wireless system which allows to transmit measured data of sensors made of smart concrete. Measured data are transmitted from measuring points to the collecting unit, which stores them, and pass them to the server which is connected in the Internet network. The design of the system is focused to achieve low power consumption of all used components to provide the longest possible operation time, when using primary lithium cell. The design should be also able to provide possibility of easy modification of the measuring points.

This diploma thesis deals with designing and manipulating a robot for training table tennis. Robot's mechanical construction is based on aluminium profiles supported by various standardized assembly units, such as rotating bearings, plain bearings, threaded rods... The front-end part of the robot, which requires better deformation property and lighter weight, was made from ABS material using 3D rapid prototyping technology. The design of the robot allows its body to rotate around three axises. Thanks to the high dynamical ability, robot can be set to throw balls to various places on the playing table, with different types of ball spin. Balls will be shot out by two rubber wheels, which are attached to two electrical DC motors. By driving the speed of the two motors, we can control the speed of the ball, as well as speed of its spin. All robot's activities are driven by an embedded system designed using microcontroller ATMega128. A firmware for controlling robot's function was writen and flashed into the microcontroller. End-users might communicate with the robot via a system of buttons and a text LCD display. The built robot was tested and it has shown its ability to throw balls to 6 different places of the playing table, at different speeds, with different types of ball spin, and different spin speed, according to the parameters set by user.

The aim of this work is to design and construct a printed circuit board with touchscreen connection that will serve as a universal platform for controlling a variety of devices including industrial devices. The functionality of the board is demonstrated on control of gas boiler application. The first part attends to currently used and available graphic displays, touchscreens, communication interfaces and microcontrollers that allow control of a graphic display. The main focus is put on LCD TFT displays, resistive touch panels and microcontrollers with LCD TFT controller. The second part describes the selection of system components, design of printed circuit board and implementation of thermostat. The end of the work evaluates the produced device and discusses possible future extensions.

The aim of master thesis is implementation of USB host in a microcontroller PIC. The thesis contains description of ways of peripherals to computer connections with detailed description of USB bus. There are also discussed several approaches in implementations USB host for embedded systems. A concept of layered USB host system is designed on the basis of analysis of the state of the art. Finally, the designed system is implemented in microcontroller. Resulting firmware of development kit is tested on real USB device.