No description available.

No description available.

Thesis (MTech (Information Technology))--Cape Peninsula University of Technology, 2018. / The DCS invested in the ICT solution to drive their Enterprise Architectural strategic and objective goals. Government departments uses ICT on their day to day business activities and to pursue for competitive progression compare to other parts of the world. The challenges are entirely depending on the user adoption of new technology. Other challenges that might delay the progress in government department would be the financial constraints and the socio inequality among our community in the developing countries. Government has a growth in e-government ICT’s infrastructure used in everyday activities and online functionality. These emerge from private entities that the government does business with, to force them to move away from manual function to electronic function and processes. Electronic monitoring system has been there in some parts of the world. Hence the South African government has opt to make use of this tool as it has been have a success results in some parts of the world. Even though there are some challenge the department has decided to implement EM system for monitoring of parolees. This study explores the factors that influence the adoption of electronic monitoring systems of parolees in the Department of Correctional Services (DCS) in South Africa, which will assist the DCS to monitor parolees effectively under budgetary constraints. Also to overcome the challenges of overcrowding, saving more cost of building more new facilities.

Thesis(M.S.)--Auburn University, 2007. / Abstract. Vita. Includes bibliographic references.

In order to achieve binding Government targets towards the decarbonisation of the electricity network, the GB power system is undergoing an unprecedented amount of change. A series of new technologies designed to integrate massive volumes of renewable generation, predominantly in the form of offshore wind, asynchronously connecting to the periphery of the transmission system, are transforming the requirements of the network. This displacement of traditional thermal generation is leading to a significant reduction in system inertia, thus making the task of system operation more challenging. It is therefore deemed necessary to develop tools and technologies that provide far greater insight into the state of the power system in real-time and give rise to methods for improving offline modelling practices through an enhanced understanding of the systems performance. To that extent PMUs are seen as one of the key enablers of the Smart Grid, providing accurate time-synchronised measurements on the state of the power system, allowing the true dynamics of the power system to be captured and analysed. This thesis provides an analysis of the existing PMU deployment on the GB transmission system with a view to the future system monitoring requirements. A critical evaluation and comparison is also provided on the suitability of a University based Low Voltage PMU network to further enhance the visibility of the GB system. In addition a novel event detection algorithm based on Detrended Fluctuation Analysis is developed and demonstrated, designed to determine the exact start time of a transmission event, as well as the suitability of such an event for additional transmission system analysis, namely inertia estimation. Finally, a reliable method for the estimation of total system inertia is proposed that includes an estimate of the contribution from residual sources, of which there is currently no visibility. The proposed method identifies the importance of regional inertia and its impact to the operation of the GB transmission system.

Plasma cleaning is the most effective dry process to remove surface contaminates from a SAW (Surface Acoustical Wave) device. Consistent gas pressures, flows, and good electrical connections between the chamber shelves are necessary for the process to function predictably. In addition, operation of the monitoring system must be transparent to the plasma cleaning unit. This thesis describes a simple solution to the complex problem of monitoring a plasma cleaning system. The monitoring system uses the LabVIEW® G programming language and hardware, both products of National Instruments, Inc.®, to monitor critical parameters necessary to achieve a consistent process when cleaning these devices.

No description available.

Corpus Christi Bay (TX, USA) is a shallow wind-driven bay which is designated as a National Estuary due to its impact on the economy. But this bay experiences periodic hypoxia (dissolved oxygen <2 mg/l) which threatens aerobic aquatic organisms. Development of the Coastal Margin Observation and Assessment System (CMOAS) through integration of real-time observations with numerical modeling helps to understand the processes causing hypoxia in this energetic bay. CMOAS also serves as a template for the implementation of observational systems in other dynamic ecosystems for characterizing and predicting other episodic events such as harmful algal blooms, accidental oil spills, sediment resuspension events, etc. State-of-the-art sensor technologies are involved in real-time monitoring of hydrodynamic, meteorological and water quality parameters in the bay. Three different platform types used for the installation of sensor systems are: 1) Fixed Robotic, 2) Mobile, and 3) Remote. An automated profiler system, installed on the fixed robotic platform, vertically moves a suite of in-situ sensors within the water column for continuous measurements. An Integrated Data Acquisition, Communication and Control system has been configured on our mobile platform (research vessel) for the synchronized measurements and real-time visualization of hydrodynamic and water quality parameters at greater spatial resolution. In addition, a high frequency (HF) radar system has been installed on remote platforms to generate surface current maps for Corpus Christi (CC) Bay and its offshore area. This data is made available to stakeholders in real-time through the development of cyberinfrastructure which includes establishment of communication network, software development, web services, database development, etc. Real-time availability of measured datasets assists in implementing an integrated sampling scheme for our monitoring systems installed at different platforms. With our integrated system, we were able to capture evidence of an hypoxic event in Summer 2007. Data collected from our monitoring systems are used to drive and validate numerical models developed in this study. The analysis of observational datasets and developed 2-D hydrodynamic model output suggests that a depth-integrated model is not able to capture the water current structure of CC Bay. Also, the development of a threedimensional mechanistic dissolved oxygen model and a particle aggregation transport model (PAT) helps to clarify the critical processes causing hypoxia in the bay. The various numerical models and monitoring systems developed in this study can serve as valuable tools for the understanding and prediction of various episodic events dominant in other dynamic ecosystems.

Abstract According to the development of industry, conventional surveillance system has not already satisfied by the demand today. The combination application of the CCD camera and image analysis technology in personal computer could enhance the functionality and more and more get a lot of attraction on it. Therefore, CCD camera is gradually popular in people live and industry application. However, CCD camera depends on the process ability of personal computer very much. Furthermore, it can¡¦t work well independently on the application. Based on these problems, this paper proposes an effective monitoring technique to establish an image servo module through using the embedding Ethernet controller with CMOS image sensor. The ¡§image servo module¡¨ can execute independently the designate image monitor work. Eventually, an ¡§Internet-based remote visual monitoring system¡¨ was built by integrating ¡§image servo module¡¨ and ¡§database service system¡¨ to widely promote the application on surveillance system. From the experiment system, user can use the IE explore or Netscape to supervise the internet-based image monitor system from web-server. In addition, a real-time monitor system based on VB program tool was also developed for any computer to monitor or setup the remote image server module to achieve the designated work. The transfer speed of Internet image server system is 7~8 frames/s. Keywords¡Gimage servo module, Internet-based remote visual monitoring systems

För att uppnå Sveriges miljömål begränsad klimatpåverkan behöver åtgärder göras för att minska energianvändningen inom bostads- och servicesektorn, vilken stod för drygt en tredjedel av Sveriges totala energianvändning år 2014. Dålig styrning av värme-, ventilations- och kylsystem är ofta en bidragande orsak till onödigt hög energianvändning inom hushåll och lokalbyggnader. Med hjälp av fastighetsautomation samlas byggnadens tekniska system i ett styr- och övervakningssystem, vilket kan användas för att optimera styrningen. Dock är marknaden för fastighetsautomation dåligt kartlagd och information saknas angående styrsystemens funktioner och användningsområden. Rapporten inleds med grundläggande teori för att skapa ökad förståelse för senare delar. Därefter har en undersökning gjorts för ett antal företags styrsystem i syfte att klargöra dess funktioner, användningsområden samt vilken energibesparing styrsystemen ger upphov till. I rapporten beskrivs också tillvägagångssättet för en verklig installation i lokalbyggnaden Kv Slottet 4 och hur energianvändning samt inneklimat har påverkats efter att styrsystemet installerats. Resultatet för den svenska marknadsöversikten visar på att fastighetsautomation är etablerat inom byggnadstyperna flerbostadshus och lokalbyggnader medan småhus är en outforskad marknad. Vanliga funktioner som implementeras i styrsystem är drifttidsstyrning, prognosstyrning och effektbegränsning. Undersökningen har visat att fastighetsautomation ger upphov till energibesparingar på i snitt 10 – 40 %. Besparingen varierar dock och beror på flera faktorer som byggnadstyp, geografisk placering och tidigare styrning. Företagen använder också olika metoder för att beräkna energibesparingen varför det är problematiskt att rättvist jämföra besparingen för olika styrsystem. Energibesparingen för de olika byggnadstyperna och installationssystemen har i många fall varit svåra att få tillgång till. Generellt gäller att de företag som tillhandahåller obligatoriskt driftavtal har bättre koll på den besparing som styrsystemet ger upphov till. I examensarbetet har fyra företag kartlagts men för en mer djupgående analys över den svenska marknaden bör fler företag undersökas. Efter installationen av det automatiska styrsystemet Ecopilot® på Kv Slottet 4 erhölls en värmeenergibesparing för vald period på upp till 20,6 MWh, vilket motsvarar en procentuell besparing på 53 %. Energibesparingen varierar dock till viss del beroende på vilken beräkningsmetod som används. Byggnadens totala elbesparing uppgick till 6,5 MWh, vilket motsvarar 20 % minskning av elanvändningen för undersökt period. Den beräknade energibesparingen kan inte helt tillskrivas Ecopilot® eftersom ett annat driftfall rådde under jämförd period än det som var precis innan installationen. Via styrsystemets gränssnitt kunde emellertid en sänkt energianvändning härledas till Ecopilot®. Bland annat tack vare effektivare reglering, samkörning av installationssystem, effektivare värmeåtervinning, sänkta ventilationsflöden samt lägre inomhus- och flödestemperaturer. Intervjuer med verksamma personer i byggnaden påvisar att ingen skillnad har märkts på inomhusklimatet före och efter installationen av Ecopilot®, varken med avseende på det termiska klimatet eller på luftkvaliten. För större säkerhet gällande styrsystemets inverkan på inomhusklimatet och energianvändningen bör en längre tidsperiod utvärderas. / Sweden has a number of environmental objectives, of which one is reduced climate impact. To achieve this goal measures have to be taken in order to reduce building energy use in residential and services sectors, sectors that accounted for over one third of Sweden’s total energy use in 2014. Poor regulation of heating, ventilation, and air conditioning (HVAC) is a common reason for often unnecessary high energy use in residential buildings and non-residential premises. Building automation integrates the buildings technical systems, such as HVAC, into one centralized system for monitoring and controlling, which then can be used to optimize the regulation for these systems. The market is however poorly mapped and information is missing regarding functions and area of use for these control systems. This report begins with a description of basic theory that is relevant for understanding parts later on. An analysis has then been made for a number of different building automation systems to clarify their functions, area of use, and potentials in energy savings. The report also describes the procedure for a real installation on Kv Slottet 4 and how the energy use and indoor climate has been affected after the building automation system has been installed. Results regarding the Swedish market overview shows that building automation is established in apartment buildings and non-residential premises while building automation is still unused in smaller houses. Some of the most common functions that are implemented in control systems are time clock operation, forecast control and power limitation. The analysis has shown that building automation can lead to energy savings between 10 to 40 %. The size of the saved energy depends on a number of factors like type of building, geographical location and former regulation of HVAC. The building automation companies are using different methods to calculate the energy saving why it is a problem to fairly compare different control systems. The information on energy savings for different type of buildings and technical systems are in many cases hard to get hold of. Generally speaking, the companies that provide mandatory agreements for operating the control system have more detailed information regarding energy savings. Four different companies were covered in this report. More companies should be mapped in order to make a more profound analysis. After the installation of Ecopilot® on Kv Slottet 4, a heat reduction of up to 20.6 MWh for the chosen period of time was achieved. That corresponds to a relative energy saving of 53 %. The energy saving varies depending on what method is used for calculation. The buildings total energy savings for electricity was 6.5 MWh, which corresponds to a 20 % reduction. The calculated energy saving is not all due to the building automation system but there has been some reduction. Ecopilot® has lowered the energy use by more efficient regulation, co-operating heating and cooling, more efficient heat recovery, lowered ventilation flows, and lowered temperatures. No change in indoor climate has been noticed by the people that were interviewed. The control system should be evaluated for a longer period of time to ensure how much it affects the indoor climate and the energy use in the building.