Optical networks based on Wavelength Division Multiplexing (WDM) technology show many clear benefits in terms of high capacity, flexibility and low power consumption. All these benefits make WDM networks the preferred choice for today’s and future transports solutions which are strongly driven by a plethora of emerging online services. In such a scenario, capability to provide high capacity during the service provisioning phase is of course very important, but it is not the only requirement that plays a central role. Traffic dynamicity is another essential aspect to consider because in many scenarios, e.g., in the case of real time multimedia services, the connections are expected to be provisioned and torn down quickly and relatively frequently. High traffic dynamicity may put a strain on the network control and management operations (i.e., the overhead due to control message exchange can grow rapidly) that coordinate any provisioning mechanisms. Furthermore, survivability, in the presence of new failure scenarios that goes beyond the single failure assumption, is still of the utmost importance to minimize the network disruptions and data losses. In other words, protection against any possible future failure scenario where multiple faults may struck simultaneously, asks for highly reliable provisioning solutions. The above consideration have a general validity i.e., can be equally applied to any network segment and not just limited to the core part. So, we also address the problem of service provisioning in the access paradigm. Long reach Passive Optical Networks (PONs) are gaining popularity due to their cost, reach, and bandwidth advantages in the access region. In PON, the design of an efficient bandwidth sharing mechanism between multiple subscribers in the upstream direction is crucial. In addition, Long Reach PONs (LR-PONs) introduces additional challenges in terms of packet delay and network throughput, due to their extended reach. It becomes apparent that effective solutions to the connection provisioning problem in both the core and access optical networks with respect to the considerations made above can ensure a truly optimal end-to-end connectivity while making an efficient usage of resources. The first part of this thesis focuses on a control and management framework specifically designed for concurrent resource optimization in WDM-based optical networks in a highly dynamic traffic scenario. The framework and the proposed provisioning strategies are specifically designed with the objective of: (i) allowing for a reduction of the blocking probability and the control overhead in a Path Computation Element (PCE)-based network architecture, (ii)  optimizing resource utilization for a traffic scenario that require services with diverse survivability requirements which are achieved by means of  dedicated and shared path-protection, and (iii) designing provisioning mechanism that guarantees high connection availability levels in Double Link Failures (DLF) scenarios. The presented results show that the proposed dynamic provisioning approach can significantly improve the network blocking performance while making an efficient use of primary/backup resources whenever protection is required by the provisioned services. Furthermore, the proposed DLF schemes show good performance in terms of minimizing disruption periods, and allowing for enhanced network robustness when specific services require high connection availability levels. In the second part of this thesis, we propose efficient resource provisioning strategies for LR-PON. The objective is to optimize the bandwidth allocation in LR-PONs, in particular to: (i) identify the performance limitations associated with traditional (short reach) TDM-PON based Dynamic Bandwidth Allocation (DBA) algorithms when employed in long reach scenarios, and (ii) devise efficient DBA algorithms that can mitigate the performance limitations imposed by an extended reach. Our proposed schemes show noticeable performance gains when compared with conventional DBA algorithms for short-reach PON as well as specifically devised approaches for long reach. / <p>QC 20130520</p>

Passive optical networks (PONs) are point-to-multipoint networks where a single Central Office (CO) is connected to a number of downstream Optical Network Units (ONUs) via a single optical fiber by splitting the optical signal with passive splitters. Due to technology advances and increasing bandwidth requirements, these networks have moved to last mile deployment, also known as fiber-to-the-home (FTTH). The planning of these PONs are traditionally done by hand, but automated methods can be used to decrease deployment costs and planning time. Even though a number of methods have been proposed to address this problem through the solving of integer linear programming (ILP) models, they suffer from limited availability, inaccuracies and limited scalability due to the problem complexity. This dissertation focusses on improving the accuracy of these models as well as improving scalability to a point where large-scale problems can be solved feasibly. To address this, a basic model is implemented to capture the network structure and verified accordingly. Results show this model can be solved quickly, but has large discrepancies with real-world plans. Refinements in the form of fiber duct sharing, network constraints, multiple splitter types and economies of scale among others are then incorporated into a refined model and solved. Analysis of the experimental results indicates improved accuracy and lower deployment costs, at the expense of increasing computation effort considerably. Heuristic techniques are then examined to improve computational performance, including an elementary heuristic (ELEM), the Branch Contracting Algorithm (BCA) and problem decomposition. It is demonstrated that through the use of k-means clustering, the refined model can be solved in a fraction of the time while keeping deployment costs comparably low. / Thesis (MIng (Computer and Electronic Engineering))--North-West University, Potchefstroom Campus, 2013

Passive optical networks (PONs) are point-to-multipoint networks where a single Central Office (CO) is connected to a number of downstream Optical Network Units (ONUs) via a single optical fiber by splitting the optical signal with passive splitters. Due to technology advances and increasing bandwidth requirements, these networks have moved to last mile deployment, also known as fiber-to-the-home (FTTH). The planning of these PONs are traditionally done by hand, but automated methods can be used to decrease deployment costs and planning time. Even though a number of methods have been proposed to address this problem through the solving of integer linear programming (ILP) models, they suffer from limited availability, inaccuracies and limited scalability due to the problem complexity. This dissertation focusses on improving the accuracy of these models as well as improving scalability to a point where large-scale problems can be solved feasibly. To address this, a basic model is implemented to capture the network structure and verified accordingly. Results show this model can be solved quickly, but has large discrepancies with real-world plans. Refinements in the form of fiber duct sharing, network constraints, multiple splitter types and economies of scale among others are then incorporated into a refined model and solved. Analysis of the experimental results indicates improved accuracy and lower deployment costs, at the expense of increasing computation effort considerably. Heuristic techniques are then examined to improve computational performance, including an elementary heuristic (ELEM), the Branch Contracting Algorithm (BCA) and problem decomposition. It is demonstrated that through the use of k-means clustering, the refined model can be solved in a fraction of the time while keeping deployment costs comparably low. / Thesis (MIng (Computer and Electronic Engineering))--North-West University, Potchefstroom Campus, 2013

Optical WDM network is the suitable transport mechanism for ever increasing bandwidth intensive internet applications. The WDM technique transmits the data over several different wavelengths simultaneously through an opticalfiber and the switching is done at wavelength level. The connection between the source and destination is called the light path. Since the WDM network carries huge amount of tra c, any failure can cause massive data loss. Therefore protecting the network against failure is an important issue. Maintaining high level of service availability is an important aspect of service provider. To provide cost effective service, all-optical network is the suitable choice for the service provider. But in all optical network, the signals are forced to remain in optical domain from source to destination. In the firrst part of the thesis, we deal the physical layer impairments (PLIs) aware shared-path provisioning on a wavelength routed all-optical networks. As the signal travels longer distances, the quality of the signal gets degraded and the receiver may not be able to detect the optical signal properly. Our objective is to establish a light path for both the working path and protection path with acceptable signal quality at the receiver. We propose an impairment aware integer linear programming (ILP) and impairment aware heuristic algorithm that takes into account the PLIs. The ILP provides the optimal solution. It is solved using IBM ILOG CPLEX solver. It is intractable for large size net-work. Therefore we propose the heuristic algorithm for large size network. It is evaluated through discrete-event simulation. But the algorithm provides only the suboptimal solution. To know the performance of this algorithm, the simulation result is compared with the optimal solution. We compute total blocking probability, restoration delay, computation time, and connection setup delay with respect to network load for the heuristic algorithm. We compare the performance of shared-path protection with dedicated-path protection and evaluate the percentage of resource saving of shared-path protection over the dedicated-path protection. In the second and third part of the thesis, we address the issues related to flexible-grid optical networks. In wavelength routed optical network, the bandwidth of each wavelength is fixed and rigid. It supports coarse grained tra c grooming and leads to ancient spectrum utilization. To overcome this, flexible-grid optical networks are proposed. It supports flexible bandwidth, and ne grained tra c groom In the second part of the thesis, we address the routing and spectrum allocation (RSA) algorithm for variable-bit-rate data tra c for flexible-grid optical networks. The RSA problem is NP-complete. Therefore a two-step heuristic approach (routing and spectrum allocation) is proposed to solve the RSA problem. The first step is solved by using a classical shortest path algorithm. For the second step we propose two heuristic schemes for frequency-slot allocation: (i) largest number of free frequency-slot allocation scheme and (ii) largest number of free frequency-slot maintaining scheme. As the network load increases, the spectrum is highly fragmented. To mitigate the fragmentation of the spectrum, we propose a xed-path least-fragmentation heuristic algorithm which fragments the spectrum minimally. It also supports varying-bit-rate tra c and also supports dynamic arrival connection requests. Through extensive simulations the proposed algorithms have been evaluated. Our simulation results show that the algorithms perform better in terms of spectrum utilization, blocking probability, and fraction of fragmentation of the spectrum. The spectrum utilization can reach up to a maximum of 92% and that only 71% of the spectrum is fragmented under maximum network load condition. Finally in the third part of the thesis, we discuss PLIs-aware RSA for the transparent exible-grid optical network. In this network, not only the optical signal expected to travel longer distance, but also to support higher line rates, i.e., data rate is increased up to 1 Tb/s. In such a high data rate, the optical signals are more prone to impairments and noises. As the transmission distance increases, optical signals are subject to tra-verse over many bandwidth-variable wavelength cross connects (BV-WXC) and multiple fibber spans due to which the PLIs get accumulated and are added to the optical signal. These accumulated impairments degrades the signal quality to an unacceptable level at the receiver, the quality of transmission falls below the acceptable threshold value, and the receiver may not be able to detect the signal properly. Therefore our objective is to develop an impairment aware RSA algorithm which establishes the QoT satisfied empathy based on the available resources and the quality of the signal available at the receiver. We formulate the PLIs-RSA problem as an ILP that provides an optimal solution. The optimal solution is obtained by solving the ILP using IBM ILOG CPLEX optimization solver. Since ILP is not efficient for large-size networks, we propose a heuristic algorithm for such a large-size networks. The signal power is measured at the receiver and the connection is established only when the signal power lies above the threshold value. The heuristic algorithm is evaluated through discrete-event simulation. It gives the sub-optimal solution. The simulation result is compared with optimal solution. The result shows that heuristic algorithm performs closer to the ILP. We compute the total blocking probability versus the network load for different spectrum allocation schemes. Total blocking probability is the sum of frequency-slot blocking probability and QoT blocking probability. We compute spectrum efficiency for the proposed algorithm. We also compare our algorithm with the existing routing and spectrum allocation algorithm, and the result shows that our algorithm outperforms the existing algorithms in terms of blocking probability and spectrum utilization.

In this research, we consider the impact of spectrum fragmentation in optical single-/multi-path routing transmission on the efficiency of the elastic optical networks. O-OFDM multicarrier transmission is a promising technique that makes it possible to choose just an adequate portion of available spectrum to satisfy the requested capacity. This involves focusing on the work to reduce the fragmentation effects by dynamically updating and controlling the minimum bandwidth allocation granularity. that serves the light path requests over multipath networks. We adopt linear and nonlinear dynamic mechanisms, which are denoted as LDAɡ and NLDAɡ that are proportional to the optical link/path bandwidth fragmentation status. Simulation results show that the minimum bandwidth granularity dynamic adaptation based on the optical path fragmentation status offers improved performance over fixed minimum bandwidth allocation granularity with respect to the bandwidth blocking probability, the throughput, the network bandwidth utilization and the number of path splitting.

As redes ópticas têm evoluído de forma contínua dentro de um paradigma de aumento das taxas de transmissão e extensão dos enlaces, devido à demanda crescente de banda em função do crescimento do tráfego da Internet. Além disso, atualmente, diversas propostas vêm sendo implementadas visando torná-las mais dinâmicas e flexíveis. Uma destas propostas que atualmente está no âmbito de pesquisa e desenvolvimento refere-se às redes ópticas definidas por software (Software Defined Optical Network, SDON). Nas SDONs, o plano de controle é desacoplado do plano de encaminhamento de dados possibilitando que controladores remotos configurem em tempo real diversos parâmetros dos canais ópticos, tais como a taxa de transmissão, o formato de modulação, a largura do espectro, entre outros. Nestas redes, o sistema de controle torna-se bastante complexo, uma vez que diversos parâmetros têm que ser ajustados de forma dinâmica e autônoma, ou seja, com a mínima intervenção humana. O emprego de técnicas de inteligência computacional em tal controle possibilita a configuração autônoma dos parâmetros dos equipamentos com base em dados coletados por monitores de rede e o aprendizado, a partir de eventos passados, visando a otimização do desempenho da rede. Esta arquitetura de controle constitui um novo paradigma na evolução das redes ópticas, as denominadas Redes Ópticas Cognitivas. A escolha de uma técnica de inteligência computacional adequada para tomada de decisão em redes ópticas é importante para se obter vantagens no uso da cognição. Esta técnica deve possibilitar o aprendizado e ainda minimizar a complexidade computacional, uma vez que a configuração dos parâmetros da rede deve ocorrer em tempo real. Neste contexto, esta tese investiga o uso do algoritmo de agrupamento Fuzzy C-Means (FCM) para aprendizado e tomada de decisão em redes ópticas flexíveis de próxima geração. FCM possibilita a geração automática de regras com base na experiência adquirida no meio de operação (aprendizado) e a tomada de decisão a partir destas regras. Uma comparação de desempenho entre os algoritmos FCM e CBR (Case-Based Reasoning) é apresentada. O algoritmo CBR foi escolhido para esta comparação devido a ter sido utilizado recentemente, com sucesso, em redes ópticas cognitivas. Por fim, um conceito de rede óptica cognitiva é apresentado. / Optical networks have evolved continuously increasing the transmission rate and the extension of links due to the increased bandwidth consuming. Moreover, currently, several proposals are under development to make the next generation optical network more dynamic and flexible. The term \"flexible\" refers to the ability of dynamically adjust the parameters of the optical network such as modulation format, transmission rate, optical bandwidth and others, according with the quality of transmission of each lightpath. In this scenario, a Software Defined Optical Network (SDON) emerges as a new optical network paradigm, where the control plane is decoupled from the data plane, enabling remote controllers to configure network equipment from different hardware vendors, which allows a degree of software programmability to the network. In SDON, the control plane needs to include functionalities to operate autonomously, i.e, with minimal human intervention. The use of the computational intelligence techniques in such control plane enables the autonomous operation and learning based on past events, in order to optimize the network performance. This architecture represents a new paradigm in the evolution of optical networks, resulting in so-called Cognitive Optical Networks. The choice of a computational intelligence technique for learning and decisionmaking in such optical networks is essential to bring advantages with the use of cognition. This technique should minimize the computational complexity, since the configuration of the network parameters must occur in real time.In this context, this thesis investigates the use of Fuzzy C-Means clustering algorithm (FCM) for learning and decision-making in the software defined optical networks context. FCM enables the automatic generation of rules, based on the experience gained during the network operation. Then, these rules are used by the control plane to take decisions about the lightpaths\' configuration. A comparison of performance between the FCM and the CBR (Case-Based Reasoning) algorithm. CBR algorithm was chosen because it has been successfully used in cognitive optical networks. Finally, we propose a concept for optical cognitive network.

O principal objetivo deste trabalho é analisar a arquitetura das redes ópticas, discutir o estado da arte dos protocolos necessários ao seu desenvolvimento, e avaliar os vários esforços empregados para a padronização destas por diferentes instituições. Conceitualmente, redes ópticas são aquelas nas quais a tecnologia dominante na camada física é a fibra óptica. Tais redes originaram-se no início dos anos 80 com a utilização dos cabos de fibras ópticas monomodo, tendo evoluído com a introdução de uma nova base tecnológica composta por novos tipos de fibras ópticas, amplificadores ópticos, sistemas DWDM e componentes ópticos, como multiplexadores e demultiplexadores add/drop e cross-connects ópticos. O desenvolvimento destes componentes possibilitará a evolução dos simples enlaces DWDM ponto a ponto para a rede totalmente óptica. Neste trabalho é analisado como as aplicações interagirão com esta camada física. Tal interação tem provado ser um desafio dentro da atual arquitetura das redes de dados, no intuito de disponibilizar soluções que habilitem o transporte de um grande volume de tráfego de forma eficiente. Neste sentido é analisado o emprego de tecnologias como o MPLS (Multiprotocol Label Switching) e sua evolução, o Generalized MPLS (GMPLS). Finalmente apresenta-se a versão do ITU para arquitetura de redes ópticas, e a conseqüente inserção do GMPLS nesta padronização / The main objective of this work is to analyze the evolution trends for the architecture of the optical networks, discuss the state of the art protocols required for its development and evaluate the various efforts being carried out by different institutions in order to achieve standardization. In this context, optical networks are those in which the dominant technology in the physical layer is the optical fiber. Such networks arose in the early eighties with the use of the monomodo fiber optic cables and were further developed with the introduction of a new technological base composed by new types optical fibers, optical amplifiers, DWDM systems and optical components such as add/drop multiplexers and optical cross-connects. The introduction of these components will make possible the evolution from the simple point-to-point DWDM connections to the all optical networks. In this work we analyze how the applications will interact with this physical layer. Such interaction has been proving to be a challenge within the framework for the current architecture of data networks, aiming at offering solutions to enable the transport of a great volume of traffic in an efficient manner. With this goal in mind, the use of technologies such as MPLS (Multiprotocol Label Switching) and its evolution, the Generalized MPLS (GMPLS) is discussed. Finally, we present the ITU version for the architecture optical networks, addressing its merging with the GMPLS

Orientador: Rangel Arthur / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Tecnologia / Made available in DSpace on 2018-08-22T06:36:42Z (GMT). No. of bitstreams: 1 Hoshino_FelipeKojiGodinho_M.pdf: 3730881 bytes, checksum: d6cd57d6d8286fe95b3166c35de77d73 (MD5) Previous issue date: 2013 / Resumo: O aumento exponencial no tráfego mundial de dados tem imposto inúmeros desafios para os sistemas de telecomunicações. Há um compromisso entre o interesse das operadoras de telecomunicações, de aumentar a receita líquida, e dos clientes, de aumentar a taxa de transmissão de dados. Com isso, diversas soluções têm sido discutidas no âmbito das comunicações ópticas. Uma das propostas estudadas é a aplicação mais intensa do processamento digital de sinais. Dessa forma, neste trabalho foi estudado e simulado o uso da modulação OFDM (Orthogonal Frequency Division Multiplexing) nas redes ópticas de nova geração. Também foi simulado um modem OFDM em linguagem VHDL (Very High Speed Integrated Circuit Hardware Description Language) sendo esta uma etapa do projeto de novos equipamentos. Como prova de conceito, analisou-se o desempenho de redes ópticas por meio do software OptiSystem. De maneira geral, os resultados obtidos foram satisfatórios para demonstrar a viabilidade da modulação OFDM em redes ópticas de nova geração / Abstract: The exponential increase in global data traffic has imposed many challenges for telecommunication systems. There is a trade-off between the interest of telecom operators to increase the net revenue and the customers to increase the transmission data rate. Several solutions have been discussed in optical communications field. One approach is the more intense application of the digital signal processing. Thus, in this work is presented a review and simulations of OFDM modulation (Orthogonal Frequency Division Multiplexing) in the next generation networks. It was also simulated a OFDM modem in VHDL (Very High Speed Integrated Circuit Hardware Description Language) which for a new equipment design. The performance of optical networks has been examinated with OptiSystem software as o proof of concept. In general, the results obtained were satisfactory to show the feasibility of OFDM modulation in the next generation networks / Mestrado / Tecnologia e Inovação / Mestre em Tecnologia

With the technological shift towards big data, internet of things (IoT), 5G applications and cloud computing, the demand for high capacity networks is dramatically increasing. To avoid congestion and saturation, content and service providers are re-designing their network (backbone, metro and data-centers interconnects) connectivity using gridless optical line systems along with programmable coherent transponders. The latter are expected to transmit data at different data rates up to 400 Gb/s. In 2008, the first coherent receiver was commercially available [1]. By means of high-speed analog to digital converters and adaptive digital signal processing (DSP) algorithms, such revolution in modern optical communication was possible. That allowed a better spectral efficiency using higher order modulation formats and further signal reach by means of compensating both linear and nonlinear impairments. Another key development was leveraging light polarization-diversity, that permits to double the data rate at the expense of receiver complexity. To further increase the capacity of fiber links, gridless DWDM networks are being developed for deployment in the next few years. The key idea is to allow variable bandwidth signals to be allocated on optical links and by performing the appropriate network layer optimization improved throughput can be achieved. These innovations are driving new types of challenges for routing and assignment methods, as well, DSP algorithms such as clock recovery and compensation of fiber non-linearity. This thesis is organized as a collection of contributions and composed of five major parts. The first part, consisting of chapters 2 and 3. Chapter 4 deals with tracking of fast state of polarization transient, i.e. dynamic aspect of optical channels, in presence of polarization dependent loss (PDL) and filtering effects due to reconfigurable optical add-drop multiplexers (ROADMs). Chapters 5 and 6 study the impact of filtering effects, quasi-static effects in optical links and transponders, represented by ROADMs in fixed-grid and Silicon Photonics (SiPh) modulators in flexible-grid networks, respectively. Chapters 7, 8 and 9, are related to clock recovery in digital coherent receivers. They cover mitigation of jitter in gridless applications, improving jitter when deploying phase interpolators (PI) and jitter injection as a test-mean to evaluate performance.

Optical packet switching networks are the foundation for next generation high speed Internet and are fast becoming the norm rather than an option. When such high speed optical networks are taken into account, one of the key considerations is packet buffering. The importance of packet buffering plays an even bigger role in optical networks because of the physical and technological constraints on the buffer sizes that can be implemented. Existing protocols, in many real world scenarios do not perform well in such networks. To eliminate such scenarios where there is a high possibility of packet loss, we use packet pacing. The proposed pacing scheme aims to reduce or eliminate packet losses arising from packet bursts in small-buffer networks. This thesis deals with a proposed hardware design and implementation of the packet pacing system on a NetFPGA. Our results show that the packet pacer can be implemented with a low overhead on hardware resources.