The following work deals with a design of power supply testbench with design of their replaceable modules and circuits for their measurement. The final product should be used for faster design and tuning of switching power supplies. In this essay, there is detailed description of switching power supplies, analysis of support circuits and calculations for design. Based on theoretical background and selected parameters, a connection concept will be created. This concept will be validated by a device that will consist of main board, changeable modules and measurement circuits.

This work deals with the design of a galvanically isolated converter of continuous analog signals and the design of a galvanically separated converter of digital TTL signals to HTL signals. The device is complemented by a STM32 microprocessor, which ensures the connection of analog input and output. The result of the work is the circuit structure of individual units, the results of simulations of important units, complete data for the production of device and measured values of individual units.

Presented thesis analyses a function of the particular type of the nanopositioner with aim to suggest and construct an electronic device suitable for control of the nanopositioner slider. In presented material there is a description of the control signals and possibility of their generating in the respect of slider movement accuracy. The main goal of the thesis is to describe electronic units ranging from power supply, control processor unit part to end part that directly joint nanopositioner. There is also programme equipment for microcontroller and computer, communication description, movement measuring and calibration and draft for the close-up of the control loop for additional increase of the movement accuracy.

This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.

This master’s thesis is an introduction to switching mode power supplies, especially focused on digital control. It summarizes the basic topologies of switching mode power supplies, and discusses the fundamental issues of digital power supply control. It also summarizes basic informations about Piccolo microcontrolers, about experimental kit and about main parts of sample source code. Also is described here own implementation of the control law and the theory and implementation of maximum power point tracking. The conclusion of this thesis deals with implemantation a testing of the designed digitally controled switching power supply.

Tato práce se zabývá návrhem ultrazvukového odstraňovače zubního kamene pracujícím na frekvenci 27 kHz s maximální intenzitou ultrazvuku 5W/cm2. Popisuje mechanismus vzniku zubního kamene, důsledky na zdraví a metody jeho odstraňování. Zaměřuje se na principy odstraňování s využitím ultrazvukového vlnění. Dále je sestaveno funkční a blokové schéma. Na základě těchto znalostí je proveden návrh a výpočet jednotlivých částí aplikátoru. Výkonové a napěťové poměry jsou vypočítány od aplikačního hrotu směrem ke generátoru. V neposlední řadě je popsán návrh obvodů buzení měniče i kontrolních obvodů. Schémata jsou doplněna výkresy desek plošných spojů a soupiskou součástek.

This project deals with portal-type CNC milling machine design and construction. CNC milling machine should be able to machining light metals and alloys. This document contains description of mechanical components selection, machine frame design and building, design and construction of USB motion control unit and also contains control software description and user manual.

The thesis deals with the design and practical realization of class D audio power amplifier with microprocessor controlling. The first part describes the integrated circuits used in a preamplifier and his complete design with a description of the control program for ATmega128 microcontroller. The following part describes an integrated power amplifier TAS5613 and his circuits. The next section describes a switching power supply design using integrated circuit TOP261EN. The last section describes measurements of parameters of individual parts of the amplifier.

This thesis is about to introduce the development of switched power supply with output voltage of 5,5 kV and power of 4,3 kW. This thesis directly follows the outputs of two previous semester projects. Main task is about to finish the development of remaining printed circuit boards and perform launching of all parts of developed power supply. Next necessary task is about to assemble a functional prototype of the supply using the developed parts, performing a series of measurement supply’s parameters and creating of technical documentation of mechanical part. There are all stages of supply’s development included in this thesis. From the first part, that describes various types of converters, through the design of all the supply’s parts, to final implementation of functional prototype. There are the results of measurement supply’s parameters at the end of this thesis.

This thesis deals with the issue of switching power supply in terms of noise ratios in the output voltage. In the theoretical part analyzes the basic principle of classical and resonant topology switching power converters in terms of output voltage ripple and switching noise. There are also some possibilities of compensation to minimize switching noise and output ripple. The second part describes the custom design a low noise switching power supply, which is composed of an active power factor corrector, power converters and ripple limiter. The main power converter is designed as an LLC resonant converter. The last part deals with the actual construction of the proposed source, its measurement and presentation of the results.